Nitrogen Reflow Oven/SMT Reflow Oven supplier in China E8-N
Introduce:
Lead-free hot air reflow oven ETA E8-N
Ø High-end reflow oven in China
Heating System
> Eight groups of top and bottom forced hot air convection heating zones.
> Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air convection.
> Independent temperature control in each zone to ensure temperature uniformity within the process tunnel.
> Power consumption savings of 1/3 as compared to other systems.
> Patented motorized blower in each zone is designed to ensure stable air pressure, withstand high process temperature and is disturbance-free.
> Audible and light tower alarm for temperature limits, PCB drop, PCB jam and blower malfunction.
> Fast start-up (within 20 minutes) from room temperature to work temperature due to the high efficiency of the motorized heating plates.
Cooling System
> Two (2) groups of forced air convection cooling zones.
Distortion-free Conveyor System with Automated Chain Lubrication
> Combined pin chain rail and mesh belt conveyor system (Note: Mesh belt is not available on machines with center board support. )
> Closed-loop computer control of the conveyor provides a precise and repeatable reflow process.
> Automated chain lubrication system with a computer controlled central reservoir. Lubricant is added directly to the conveyor brush eliminating operator interface for this maintenance.
Fresh Air Recharge System
> Fresh air is supplied to each zone uniformly to provide a rapid process transfer.
Flux Management System
> Air amplifier forces supercharged flux collection and recirculation.
> Flux exhaust chimney with drawer shaped filter net is easy to access for maintenance.
Control System
> PC control system with windows based control software.
Additional Features
> Integrated UPS will be automatically activated in case of main power failure and will keep control PC and conveyor running for minimum 8 minutes to send out PCBs inside the oven tunnel.
> Motorized hood lift allows easy access to the inside of the oven for service and maintenance.
> Five (5) profiling ports and integrated profiling software are designed for convenient temperature profiling.
> Swing arm control PC station
> Four (4) emergency stop switches
> Two (2) exhaust ports
> SMEMA interface
> System documentation
| Model | E8 |
| GENERAL |
| Outside dimension | 5140x1300x1580mm |
| Standard color | Computer grey |
| Weight | 1800kg |
| Number of heating zones | Up8/bottm8 |
| Lengthof heating zones | 2900mm |
| Number of cooling zones | 2(built-in) |
| Exhaust volume | 10M3/minx2 Exhausts |
| Standard feature of control system |
| Electric supply required | 3phase, 380V 50/60Hz |
| Electric power required | 64KW |
| Power for warm up | 32KW |
| Power consumption | 10KW |
| Heating pattern | Up& Bottom Hot air |
| Warming time | Approx. 30minute |
| Temp. setting range | Room temp__300degree |
| Control system | PLC+ Computer |
| Temperature control method | PID close loop control +SSR driving |
| Temperature control precision | ± 1.0degree |
| Temperature deviation on PCB | ± 1.0degree |
| Data storage | Process data and status storage (80GB) |
| Abnormal alarm | Abnormal temperature(extra-high/extra-low temp) |
| Board dropped alarm | Tower light: yellow warming: Green-normal: Red-abnormal |
| Standard features of conveyor system |
| Max. width of PCB | Max: 450mm(Standard) |
| Rail Number | 1 Lane(standard) |
| Components clearance | Top/bottom clearance of PCB is 25mm |
| Conveyor height | Light → right(option: R→ L) |
| PCB transmission agent | Air-reflow=chain +mesh (Standard) |
| Conveyor height | 900/± 20mm |
| Conveyor speed range | 300~2000mm/min |
| |
| g: Green-normal: Red-abnormal |
| Standard features of conveyor system |
| Max. width of PCB | Max: 450mm(Standard) |
| Rail Number | 1 Lane(standard) |
| Components clearance | Top/bottom clearance of PCB is 25mm |
| Conveyor height | Light → right(option: R→ L) |
| PCB transmission agent | Air-reflow=chain +mesh (Standard) |
| Conveyor height | 900/± 20mm |
| Conveyor speed range | 300~2000mm/min |
| |
For SMT factory setup,we can do for you:
1. We provide fulL SMT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT factory setup
5. We can solve any question about SMT
ETA is the leading SMT factory solution provider in China,offering professional SMT factory building
advice and service.We have 20 year experience about SMT factories,offering full solutions for global
clients with our great advantaged sources.Our core technology team members are well experienced in
SMT field, learning experience from top international chip mounters meanwhile increasing independent
research and development. Currently ETA SMT equipment is representative of high quality , has
maintained absolute leading technology in the industry.
Over the years the company has been committed to improving technology, quality and perfect service.
ETA makes a positive contribution to international standard,the annual total capacity of 1200 sets,
passed the ISO9001: 2000, ISO14000, CE, UL, RoHS and other certifications. Full implementation of
the IPD process, reliable design and testing throughout the entire product life cycle.ETA's
continued investment in research and development and great contribution has been unanimously
recognized in the field. By the end of 2012, ETA has declared more than 30 patents and software
copyrights (including four invention patents), and actively involved in a number of national and
industry standards. ETA provides more advanced products and fast technical support for global
customers, at home and abroad.
Mira Yang
ETA Electronic Equipment Co., Ltd.
Websit : etasmt.en.made-in-china.com etasmt.en.made-in-china.com
/mobile : +86 13632967404