A booster pump is just like it sounds. It is a pump that boosts pressure and flow. The pump could be for a household, or moving water from a tank, or for a commercial application.

  A booster pump is a machine which will increase the pressure of a fluid. They may be used with liquids or gases, but the construction details will vary depending on the fluid.A gas booster is similar to a gas compressor, but generally a simpler mechanism which often has only a single stage of compression, and is used to increase pressure of a gas already above ambient pressure. Two-stage boosters are also made.Boosters may be used for increasing gas pressure, transferring high pressure gas, charging gas cylinders and scavenging.

1.Inhale while absorbing water and mix under pressure in the pump. Micro-bubbles 20-30 mu, good gas-liquid dissolution effect.

1.Air flotation treatment equipment, ozone water production equipment, oxygen-rich water production equipment, biochemical treatment equipment, etc.
 

2.The heat medium and cold gas circulate in various temperature regulating devices.

3.Various filters.

4.Low viscous liquids such as gasoline, diluents and solvents are sucked or transferred at high pressure from underground storage tanks.

5.Spray treatment of clear water, pure water, food, chemical fluid, waste liquid and so on.

6.Severe uses such as intermittent operation, water hammer, sharp change of back pressure, etc. Such as: small steam boilers, high-rise water supply, high-pressure tank water injection, vacuum tank attraction, etc.

7.Water samples are taken from rivers or water storage tanks, foaming liquids are transported and liquid is transported in long transverse pipelines prone to air vortices.

Details

A booster pump works just like a fan. A fan has blades that spin around to increase air movement. A booster pump has a blade like a fan inside that boosts water pressure in the same fashion.

  The booster pump has very significant components and no matter who the manufacturer is, they're pretty much the same. They have a motor which makes the impellers spin. The impeller is what moves the water. They have an inlet and an outlet. This pump has a sensing device that helps manage and maintain a level of pressure.