Products

China Automatic Face Mask Machine One Drive One Line Manufacture

China Automatic Face Mask Machine One Drive One Line Manufacture, Find details about China Face Mask Machine, Mask Machine from China Automatic Face Mask Machine One Drive One Line Manufacture

Model NO.
ATM-006
Power
8kw
Air Pressure Requirements
0.6MPa
Weight
500kg
Mask Layer
3 Layer
Trademark
ATM
Origin
China
Model NO.
ATM-006
Power
8kw
Air Pressure Requirements
0.6MPa
Weight
500kg
Mask Layer
3 Layer
Trademark
ATM
Origin
China
Technical specification of high speed face mask machine
1. face mask machine parts
No.PartQtyUnitRemark
1Patterning machine body1PCSIncludes material rack, mask crease, bridge of nose, welding section and chip assembly
2Mask film feeder 1PCSIncluding mask conveyor line
3Mask earloop welding machine1PCSIncludes frame, chain fixture line, ear loop welding, ultrasonic wave, transmission line and blanking transmission line

2. Introduction of the machine
Equipment introduction: this machine is mainly composed of  face masks machine, mask conveyor and  ear loop welding machine, which can automatically complete Non-woven fabric folding, cutting to the fixed length of nose bridge bar ,import folding cloth, then flanging, after using ultrasonic welding and cutting of form a complete face mask. The mask pieces are transferred to the ear loop machine through the inverted conveyor line. The ear loop machine welds the ear tape to the mask pieces and finish production ,at the same time automatically counts and enters the packaging process.




China Automatic Face Mask Machine One Drive One Line Manufacture






(2)Introduction of ear loop welding machine
China Automatic Face Mask Machine One Drive One Line Manufacture






To solve the problem of the instability of the ear loop welding machine of the mask machine in the market, we have corrected the ear loop welding machine. Traditional ear loop welding machine is pneumatic version: it includes pneumatic wire, pneumatic rotary welding, affected by air pressure, often appear the ear loop detachment problem, the need to manually re-ear loop, equipment running rate of 80%,  and difficult maintenance.
The new seventh generation ear loop welding machine has replaced pneumatic wire, pneumatic rotary welding with the motor, which makes the movement more coordinated and stable and improves the production efficiency of the machine. 100-130 masks can be made per minute. The welding effect is better and the width and size of ear loop are more consistent, and the movement rate is above 95%.
The new seventh generation ear loop welding machine
 
Equipment size200mm(length)*700(width)*1600(height)
Capacity100-130pcs/min
working ratio95%
Gas70L/min
Maintenance time0.5h/day

Mask material specification:
MateriaQty(mm)Size
(mm)Diameter
 (mm)Bobbin diameter		 weight
Cloth3170~200Φ600Φ76.215kg
Nose bridge bar13-7Φ400Φ76.2 25kg
Ear loop4 bags3------


(4)Face mask size: 175m×95mm(adult)

Note: Introduction of face masks
1. Type of  Masks: 2-ply, 3-ply Non-Woven Fabric face mask, 4-ply activated carbon 

2. Mask material

A. 2-ply  face mask: Non-Woven fabric, nose bridge bar, ear loop

B. 3-ply  face mask: 2-ply  non-woven  fabric, nose bridge bar, ear loop, melt-blown fabric

C. Activated carbon mask: non-woven  fabric, nose bridge bar, ear loop, melt-blown fabric

3.Main technical parameters
No.main classificationtechnical parameters
 
1Base FrameMain material is aluminum
2Equipment sizemm3200*3100*2000
3Production specifications175*95(Audit face mask )
4Capacity100-130 pcs /min.
5A mask layer3 layer
6Working ratio>90%
7Power8KW
8Air pressure requirements0.6Mpa
9Gas50L/min
10Equipment weight500KG
11The ground load≤400KG/m2
12Using the environmentTemperature: 10-35 ºC; humidity: 5-35% HR; non-flammable and corrosive gas; no dust (cleanliness: no less than 100,000 grade)

China Automatic Face Mask Machine One Drive One Line Manufacture
China Automatic Face Mask Machine One Drive One Line Manufacture
 

You Might Also Like