China Dual Channel Brushless DC Motor Driver Control Controller for Electric Wheelchair Kydbl4830-2e, Agv Servo Controller, Find details about China BLDC Controller, DC Controller from Dual Channel Brushless DC Motor Driver Control Controller for Electric Wheelchair Kydbl4830-2e, Agv Servo Controller
Power range:
DC12-60V,Max continuous current:15A max peak current:30A
2 channels output,Four quadrant working mode, regen brake
Working mode:
Independence mode,mix mode, Speed mode,torque mode,position mode
Feed back:
Hall sensor ,incremental encoder
Control mode:
Potentiometer
Over current ,over heating,over voltage,short circuit
CAN RS 232 communication,see the detailed communication protocol when using it.
Suitable for brushless dc motor, brushless servo motor
Wide-range voltage input | 10-55V |
Continuous current/ max current | 15A/30A |
Working mode | Speed mode, torque mode, position mode |
Working temperature | -20ºC-- +60ºC |
Ambient humidity | Relative humidity≤80RH |
Impulse input range | 500Hz-5000Hz |
Dimension | 142*117*34mm |
Weight | 450g |
SPECIFICATIONS | |||
Volt | Volt | V | 10-55VDC |
PWOER | W | 600 | |
Net Power | W | 600 | |
Work mode | Speed open-loop | ||
close-loop control | ° | ||
torque close-loop control | |||
control mode | 0-5V analog quantity or pulse command control mode | ||
RC (pulse width signal outputted by the receiver of aeromodelling remote control) control mode. | |||
potentiometer, analog quantity, frequency, pulse width, RS232, CAN bus |