500kw Syngas 12V190 Series Lcv Gas Generator Set
China 500kw Syngas 12V190 Series Lcv Gas Generator Set, Find details about China Syngas, Gas Generator Set from 500kw Syngas 12V190 Series Lcv Gas Generator Set
Basic Info.
Transport Package
Standard Export Wooden Packaging
Origin
China
Transport Package
Standard Export Wooden Packaging
Origin
China
Product Desciption
Product Photo Display
Gas Introduction
| Gas Composition and Calorific Value Parameter Table | ||||||||
| Gas Type | Composition(Volume%) | Low Calorific Value MJ/Nm3 | ||||||
| Syngas | CH4 | CnHm | CO | H2 | CO2 | O2 | N2 | 13.8 |
| 30 | 6.6 | 9 | 30 | 18 | 1 | 5.4 | ||
CP Genset Introduction
ComeRiver Power syngas generator set is aiming at the gas exploitation with high hydrogen content and high carbon monoxide content, the genset is fully optimized and designed based on the general genset. The genset adopts modular design, engine, alternator, and intercooler are the three major modules which the middle part is the engine, easier for daily maintenance, gas intake and exhaust, the cooling water is placed at the free end, that is easier for power plant installation and arrangement.The engine adopts double turbocharging dual shunt intake technology, and it is special designed for generator set with hydrogen content included, reliable structure design, safety operation feature, and after the optimization of the double turbocharges, a higher efficiency will provide a more efficient turbocharging pressure, thereby the genset operation power and efficiency definitely will have a obvious improvement.
The product has the features of high efficiency, low energy consumption, and low emission, etc.. The genset core control system components are all fully automatized, including ECU, air-fuel control system, speed regulating system, and ignition system, etc., product quality is extraordinary reliable and these are already widely applied on the gas generator sets. Genset adopts SE3 control system, perfect man-machine interaction and better maneuverability. ComeRiver Power genset combines advantages of high-performance engine, core control components and advanced gas genset control system, and it has been highly recognized by clients on the market.
High Power
Under the condition that the gas source and operating environment meet the requirements, the maximum power of the genset is 700KW.
High Efficiency
The double turbocharging technology has been optimized and verified for a long period, with reliable structure and high operating efficiency, thereby the genset is able to run for a long time at full loading.
Good Reliability
All major components are being fully optimized . genset owns comprehensive control system functions, complete parameter gathering and wide protection range.
Good Adaptability
The genset is specially optimized with various adjustment and control, which can adapt to the change of gas source on site.
Easy Operation and Maintenance
The three-section modular design makes the genset easy to maintain. The control system has a high degree of automation. Easy to operate.
CR Genset Parameter Tables
| Genset Container Parameters | |
| Boundary dimension of container(L×W×H, as a useful reference for transportation),unit: mm | 10450×3000×3000 |
| Noise at 1m away from the gas genset, unit: dB(A) | ≤85 |
| Total Weight (Ton) | 25 |
| Syngas Generator Set Parameter | |
| Parameter Descriptions | Parameters |
| Genset Series | 11 Series(12V190) |
| Genset Model | CP500GFJ11 |
| Rated power, kW | 500 |
| Rated current, A | 902/57.3/34.4 |
| Rated voltage, V | 400/6300/10500 |
| Rated frequency, Hz | 50/60 |
| Rated rotation speed, r/min | 1000/1200 |
| Rated power coefficient, cosΦ | 0.8 |
| Oil Heat Consumption, g/(kW·h) | 0.5 |
| Property Grade | G2 |
| Phase Number & Wiring Method | 3 Phase 3 Wire or 3 Phase 4 Wire |
| Pressure Adjustment Method | Automatic Voltage Control |
| Excitation Method | Brushless Excitation |
| Starting Method | DC24V Electrical Starting |
| Boundary Dimension(LxBxH), mm | 6200×1950×2175 |
| Net Weight, kg | 11200 |
| Engine Parameters | |
| Model of engine | CP12V190-500-02 |
| Configuration and type | Shunt Intake, turbocharging intercooler |
| Cylinder arrangement | V-Type 60° Angle |
| No. of cylinder | 12 |
| Cylinder diameter, mm | 190 |
| Piston working Distance, mm | 210 |
| Total displacement (L) | 71.45 |
| Rated speed(r/min) | 1000 |
| Idle speed(r/min) | 600 |
| Rated power(kW) | 540 |
| Lube oil consumption (g/kWh) | 0.8 |
| High outlet water temp(ºC) | 60~75 |
| Low outlet water temp(ºC) | 28~48 |
| Lube oil temp (ºC) | 65~80 |
| Lube oil pressure in oil main line(kPa) | 500~800 |
| Lube oil pressure in turbocharger (kPa) | 250~450 |
| Stable speed drop | 0~5 Adjustable |
| Lubricating system | Pressure and splatter combined lubrication method |
| Ignition method | Sparking plug electric ignition |
| Starting method | DC24V Electrical Starting |
| Direction of rotation | Counterclockwise (facing the output end) |
| Speed Regulation | Electronic Speed Regulating |
| Cooling system | Forced Circulation Water Cooling |
| Output way | Flywheel output |
| Alternator Parameters | |
| Alternator model-1 | 1FC6 455-6LA42 |
| Output power(kVA) | 625 |
| Rated speed(r/min) | 1000 |
| Rated voltage(V) | 400 |
| Rated current(A) | 722 |
| Frequency(Hz) | 50 |
| Power factor(lag) | 0.8 |
| Insulation Clause | F Grade |
| Direction of rotation | Clockwise(face to shaft end) |
| Protection Clause | IP23 |
| Cooling method | Air Cooling |
| Alternator model-2 | JFG 500-6/6300 |
| Output power(kVA) | 625 |
| Rated speed(r/min) | 1000 |
| Rated voltage(V) | 6300 |
| Rated current(A) | 57.3 |
| Frequency(Hz) | 50 |
| Power factor(lag) | 0.8 |
| Insulation Clause | F Grade |
| Direction of rotation | Clockwise(face to shaft end) |
| Protection Clause | IP23 |
| Cooling method | Air Cooling |
| Alternator model-3 | JFG 500-6/10500 |
| Output power(kVA) | 625 |
| Rated speed(r/min) | 1000 |
| Rated voltage(V) | 10500 |
| Rated current(A) | 34.4 |
| Frequency(Hz) | 50 |
| Power factor(lag) | 0.8 |
| Insulation Clause | F Grade |
| Direction of rotation | Clockwise(face to shaft end) |
| Protection Clause | IP23 |
| Cooling method | Air Cooling |
CR Technical Advantages
Three-Section Modular Design
Genset adopts three-section modular design, including gas engine, turbocharging intercooler three modules and the design improved the genset maintenance operation;
Engine places at the middle, fewer auxiliary equipment on both sides, which is convenient for daily maintenance; the intake and exhaust are concentrated in the free end, which is convenient for the layout of the power station. The three modules are evenly distributed to make the mass distribution of the genset more uniform and easier to hoisting.
Shunt Intake technology
Due to biomass gas with characterizations of containing hydrogen and low methane value, the burning speed is fast, backfire and knock are likely to be caused, ComeRiver adopts shunt intake technology with a reliable structure, compared with the multi-point electric injection and mechanical injection, shunt intake technology has a simple and reliable control mechanism; the possibility of backfire occurring is being avoided completely.
Shunt Pressurization Technology
Adopting the shunt pressurization technology, the genset operation safety is high, the gas does not need other auxiliary pressurization equipment, it is not only saves energy consumption, but also the low pressure gas intake is realized.
Single Cylinder Control Technology
Single cylinder control technology is adopted to control and protect the combustion of each cylinder separately to improve the safety and reliability of genset operation.
High Extent of Automation
Control system has the feature of perfect man-machine interaction, easy to operate. High extent of automation, human intervention is unnecessary under normal operation. The system has the functions of air-fuel ratio control, speed regulating control, pressurization bypass control, system self-adaptation, and system protection, etc.
Core Components Comprehensive Automation
All core components are independent designed, including ECU, air-fuel control system, speed regulating system, and ignition system, etc.
Multiple Choices of Genset Type
Multiple options of regular gensets and containerized gensets;
Multiple options of voltage grades, 400V,6.3kV,10.5kV;
Special designs accord to the application mode.
FAQ
- Are you a trading company or manufacture?
Manufacture with factory. - What kinds of gas generator set do you produce?
It covers for all kinds of gas produced in industry, including biomass gas, biogas, natural gas, coal mine gas, coke oven gas, syngas, industrial exhaust gas, and etc. as well as related gas produce equipment. - What is your delivery time?
Normally within 60 days after receiving the 40% contract value advance payment. It depends on the configuration and quantity, please confirm with us before order. - What is your payment terms?
Normally paying by T/T, L/C, other payment method available according to customer's requirement. - 6.What is your available port of shipment?
Normally Qingdao port, other ports available according to customers' requirement. - What is your standard packing?
All the goods will be packed by standard export wooden packaging or container, suitable for long-distance sea transportation, moisture-proof, earthquake, rust-proof. Special packing method can be accepted when needed. - What is the MIN order quantity ?
Normally 1 generator set. - What is the warranty?
12 months after the completion date of commissioning, or no later than 15 months after the delivery date on the B/L, Whichever comes first (Not including consumable parts). - How could I be sole agent?
Since we build cooperation, we will consider your order quantity and if you want, we will try our best to meet your demand.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......