Products

Panel Keypad Embossing Keys Control Keypad Push Button Switch

China Panel Keypad Embossing Keys Control Keypad Push Button Switch, Find details about China Push Button Switch, Switch from Panel Keypad Embossing Keys Control Keypad Push Button Switch

Model NO.
HC-CK-005
Structure
Power Built-in Type
Usage
Control Button, Start Button, Limit Button, Reset Button, Check Button, Playback Switch, Disconnector, Change-over Switch, Control Switch
Kind
Single-pole on-off Switch
Contact Type
Type b Contact
Detection Method
Retro-reflective Mode
Brand
Tkm
Certification
ISO9001
Quality
Top Quality
Environmental Friendly
Raw Material Pass RoHS, SGS Test
Exterior
Good Looking
Touch Feeling
Excellent Touch Feeling
Trademark
Foundation
Specification
RoHs, SGS
Origin
Dongguan, China
HS Code
8536500000
Model NO.
HC-CK-005
Structure
Power Built-in Type
Usage
Control Button, Start Button, Limit Button, Reset Button, Check Button, Playback Switch, Disconnector, Change-over Switch, Control Switch
Kind
Single-pole on-off Switch
Contact Type
Type b Contact
Detection Method
Retro-reflective Mode
Brand
Tkm
Certification
ISO9001
Quality
Top Quality
Environmental Friendly
Raw Material Pass RoHS, SGS Test
Exterior
Good Looking
Touch Feeling
Excellent Touch Feeling
Trademark
Foundation
Specification
RoHs, SGS
Origin
Dongguan, China
HS Code
8536500000
Panel Keypad Embossing Keys Control Keypad Push Button Switch:

1. Layers: Overlay, Overlay adhesive, Dome retainer, Metal dome, Spacer adhesive, Circuit, Rear adhesive (as customers request)
2. With EMV layers.
3. Connector: One with 4 pins, pitch: 1.0mm, length: 230mm;
Another with 12 pins, pitch: 1.0mm, length: 210mm

4. Technical Parameters:
Wire Resistance: ≤ 1 Ohm/cm
Current Rating: 25-100mA, 0-30V DC
Work Voltage: ≤ 50V DC
Insulation Voltage: ≤ 100M Ohm 250V DC
Working Life: ≤ One Million Times
Work Temperature: -40 Centigrade-70 Centigrade
Work Humidity: 40 Centigrade-≤ 98%RH
Basic Material Pressurization: 1500V DC

Our slogan is "Quality first, Customer first".
Welcome to visit our factory!

 		Technical Specification Of Membrane Swithc
 
wire lead resistance:<1Ω/CM
 		Life time:>1 Million times
rated current:25-100mA,0~30V DC
 		Operation Temperature:-104°F~158°F
Rated Voltage:<50V, DC
 		Operation Humidity:at104°F,<98%RH
Insulation resistance:<100MΩ,250V DC
 		Dome springback time:<5 msec
Switch travel:Flat Type 0.05-0.3mm
 		Base Material voltage withstand:1500 V DC
tactile type:0.3-1.5mm
 		Tail flexiblility:any angle within 180 degree

You Might Also Like