China Weldable Hexagonal Nut for Reinforcement Tie Rod in Wall Form, Find details about China Hex Nut, Formwork Accessories from Weldable Hexagonal Nut for Reinforcement Tie Rod in Wall Form
Weldable Hexagonal Nut for Reinforcement Tie Rod in Wall Form
Hex nut is used as normal fasteners together with washer plate; Some times used as steel bar connector, connecting two bars in the reinforcement work. When used as connector, usually a stop-pin is fixed in the middle of the nut, in order to secure the screw-in length of the bar.
Item No. | Bar dia. (mm) | Length (mm) | Hex. (mm) | Weight (Kg) |
HN-50/15 | 15 | 50 | 30 | 0.22 |
HN-60/15 | 15 | 60 | 30 | 0.25 |
HN-100/20* | 20 | 100 | 36 | 0.60 |
HN-110/20* | 20 | 110 | 36 | 0.66 |
HN-130/20* | 20 | 130 | 36 | 0.78 |
Note: " * " means equipped with stop-pin in centre.
Machining produced, weldable, galvanized;
Customized size available. Other different sizes are available: for bar dia15mm, 20mm, 26mm.
Besides the weldable nuts, casting iron hex. nuts are also available according to requirments.
Part Name | Specification | Weight (kg) | Remark |
Tie-rod
| D15 D20 | 1.52 kg/m 2.71 kg/m | L=6m; Special length available upon request. |
Wing nut
| D15 D20 | 0.35 0.70 | For tie-rod D15 / D20 |
Super plate
| D15 | 1.28 | Used in case of tie-rod and formwork panels are not vertical. |
3-lug wing nut
| D15 D20 | 0.97 0.78 | For tie-rod D15; For tie-rod D20 |
Waling plate
| 120 x 120 x 6, Φ19 120 x 120 x 8, Φ19 | 0.65 0.85 | For tie-rod and nut D15; galvanized |
Water stopper
| D15 D20 | 0.55 0.72 | Used in water resistant wall; With tie-rod D15 / D20 |
Anchor plate
| D20 | 0.95 | Embedded in concrete as lost part |