China UL TUV Ce GS Ce Certified 120 Watts 24volt Open Fram Transformer 48 Volt SMPS Switching Power Supply, Find details about China Medical Power Supply, Medical Charger from UL TUV Ce GS Ce Certified 120 Watts 24volt Open Fram Transformer 48 Volt SMPS Switching Power Supply
UL TUV Ce GS Ce Certified 120 Watts 24volt Open Fram Transformer 48 Volt SMPS Switching Power Supply
Product Specification:
• Power range: 100~200W
• Universal AC input 90 to 264 VAC
• Frequency: 47 to 63Hz
• Efficiency <= 85% depends on models.
• Output voltage available from 5 to 56VDC
• Safety: UL/cUL, TUV, CB, CE, FCC
• All models meet RoHS and WEEE
• Dimensions (L x W x H): 127.0 x 76.3 x 36.2 (mm)
• Weight:450 grams
Features:
• Active PFC Function
• High Efficiency
• CEC Compliance
• RoHS Compliance
• Over Voltage Protective Installation
• Over Current Protective Installation
• Short Circuit Protective Installation
• 100% Burn-In
• 100% Hi-Pot Tested
• MTBF > 50,000 hours
INPUT:
• Input Range: 90-264Vac
• Input Current: ≤2.5A
• Inrush Current: ≤120A peak @230VAC,cold start@25°C
• Efficiency ≤85% depends on models.
• Meet CEC Level V.
• Turn On Time ≤3S
OUTPUT:
• Over Voltage Protection: Latch off
• Short Circuit Protection: Latch off
• Over Current Protection: Latch off
ENVIRONMENTAL:
• Operating Temperature: 0 to 50°C
• Storage Temperature: -20 to 85°C
• Storage Humidity: 5% to 95 %
SAFETY:
• UL/CUL, TUV, CB, CE, FCC
MODEL NO. | OUTPUT POWER (W) | OUTPUT NO. | OUTPUT VOLTAGE (Vdc) | OUTPUT LOAD (A) | LOAD REGULATION | RIPPLE & NOISE | ||||||||||||
Single output | EP1WWWXXYZ | 100~200W | Main Power | 5~56V | 2.59~20A | ± 3% Max. | 2% Max. | |||||||||||
Dual output | EP2WWWXXYZ | 100~180W | Main Power/DC-DC | 5~56V | 2.48~18.0A | ± 3% Max. | 2% Max. | |||||||||||
Stand-by or -12V | 5Vsb or~12V | 0~2A or 0~0.5A | ± 3 or 10% Max. | 2% Max. | ||||||||||||||
Triple output | EP3WWWXXYZ | 100~175W | Main Power | 10~56V | 2.63~13.3A | ± 3% Max. | 2% Max. | |||||||||||
Stand-by Power | 5Vsb | 0~2A | ± 3% Max. | 2% Max. | ||||||||||||||
DC-DC or -12V | 5/12V or~12V | 0~5A or 0~0.5A | ± 3 or 10% Max. | 2% Max. | ||||||||||||||
Quad output | EP4WWWXXYZ | 100~175W | Main Power | 10~24V | 3.0~11.16A | ± 3% Max. | 2% Max. | |||||||||||
DC - DC Power | 5,12V | 0~5A or 0~0.5A | ± 3% Max. | 2% Max. | ||||||||||||||
-12V Power | -12V | 0~0.5A | ± 10% Max. | 2% Max. | ||||||||||||||
Stand-by Power | 5Vsb | 0~2A | ± 3% Max. | 2% Max. | ||||||||||||||
NOTE: 1 : Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.1uF ceramic capacitor & parallel with 47uF aluminum capacitor at full load and nominal line. 2 : Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 3 : Max. Power (W) ≥Vo x Io |