China Lithium 12V 80ah/88ah LiFePO4 Battery Pack with BMS for SLA Replacement, Find details about China 12V 80ah Lithium Battery, 12V 88ah LiFePO4 Battery from Lithium 12V 80ah/88ah LiFePO4 Battery Pack with BMS for SLA Replacement
Parameters
Cell | model | EA-NCM-3.7V 40Ah | ||
Capacity(C) | ≤40Ah | |||
rated voltage(V) | 3.7V | |||
Typical Impedance (mΩ) | ≤20mΩ | |||
Battery material | Li-ion NCM material | |||
PACK | Combination method | 2P3S | ||
Combination standard | capacity difference | ≤1% | ||
Impedance difference | 0.2(1kHz) | |||
Voltage difference | 40mV | |||
Rated capacity(0.5C) | ≥90AH | |||
Minimal capacity(0.5C) | 90AH | |||
Nominal voltage | 12.6 | |||
Max. charge voltage | 12.6 | |||
Discharge cut-off voltage | ≥8V | |||
Max Charge current | 40A | |||
Max discharge current | 40A | |||
Weight (Approx.) | 7.5±0.1Kg | |||
Dimension(L×W×H) | 252*175*151mm | |||
Operating temperature | Charge temperare | 0ºC~45ºC | ||
Discharge temperare | -10ºC~60ºC | |||
BMS | Single cell over-charge cut-off voltage | 4.2 | ||
over-charge release voltage | 3.9 | |||
Single cell under-discharge cut-off voltage | 2.5 | |||
Discharge release voltage | 2.9 | |||
Over-discharge cut-off current | 20 | |||
Over-discharge cut-off current delay | 10mS | |||
Short-circuit protection |
| |||
Short-circuit protection delay | 100uS | |||
Condition for the recovery of over-current and Short-circuit | Yes | |||
Balance current | Yes | |||
Communication protocol | NO |