OVERVIEW 
 P15K flexible plate beveling machine designed for metal plate and pipe prep-welding. to beveling and chamfering.It is suitable for regular curved surfaces ,such as outer circle, inner hole, waist hole, etc. and irregular inner and outer cavity edges. The chamfering of the side is applicable to the chamfering of some curved edges of large workpieces, so it can also be used for the beveling and deburring of the inner hole and the plate of the metal pipe. The product is compact, light and easy to operate, and it has many Functionality and flexibility, which can greatly improve work efficiency, increase effective working hours, reduce costs, and reduce the labor intensity of employees, making it an attractive device.
 

FEATURES
1.Portable milling, easy to operate;
2.Beveling shape:K, V, X, Y ;
3.Suitable for plate, pipe, H-beam, angle Iron, beveling and deburring of inner and outer circles;
4.Compact structure, small size, light weight, safe operation in complex environments and shaped spaces;
5.Suitable for carbon steel, stainless steel, alloy steel, cast iron, and hard plastic;


SPECIFICATION

Above parameters just for reference only, not acceptance criteria

TOOLING 
 Different angles of the groove, matching different tool chucks 

45° (standard); 30°, 37.5°, 50°, 60° (optional) 
Unique blade size for tool holders with different angles
 

 Notes

 1.ADJUSTMENT OF CUTTING WIDTH OF BLADE

 At first, back out the fastening screw under the handle, turn the handle, lift the shell, the adjustable range of 0 to 15mm.

 Our company don't advocate to adjust the cutting width more than 15mm;

 In order to protect the machines and tools, each step only adjust 5mm.

 Scale corresponding to 0,5,10,15mm, lock screw after adjust blade cutting width.

2. ADJUSTMENT OF CHAMFER ANGLE

 At fist, back out 4 fastening screws on the left and right sides of the shell.

 Adjustable angle of 30 deg to 60 deg. The scale of the shell should be aligned with the cutter white line.

 Tighten the screw after the Angle is adjusted.

 The Angle adjustment may slightly affect the cutting width of the blade.

3. OPERATION OF MACHINE. 

 Before starting the equipment, please note that different operating modes should be used for cutting in different places.

 If you like to process from the plate edge, put the machine parallel to the plate, milling tool shall not touch the plate, (about one-third of the milling cutter touch the plate ), start switch, according to the arrow direction, move the machine.

 If you like to process from the middle of plate, put the machine parallel to the plate, milling tool shall not touch the plate, start switch, after the milling cutter cut completely, according to the arrow direction, move the machine.