China 100% Copper Electric Power Brushless Stamford Type Alternator Generator, Find details about China Brushless Alternator, Brushless Stamford Type Alternator from 100% Copper Electric Power Brushless Stamford Type Alternator Generator
Insulation And Varnish:
The insulation system is class H.
All wound components are impregnated with materials and processes designed specifically ensure the generator running in dreadful conditions. The special developed resin materials meet rotating components.
Windings and Electrical Performance:
All generator stators are wound to 2/3 pitch, This eliminates triple(3rd,9th,15th…)harmonics on the voltage waveform and is an optimum designed for UPS equipment of non linear loads. The 2/3 pitch design avoids excessive neutral currents result from higher winding pitches. A fully consecutive damper winding reduces oscillations during paralleling. The 2/3 pitch windings and carefully pole and tooth ensures very low waveform distortion.
Terminals And Terminal Box:
Standard generators are 3-phase,and you can reconnect 12 ends of the terminals, which are mounted on a terminal block at the non-drive end of the generator. A sheet steel terminal box within AVR is provided with enough place for the customers'wiring. It has removable panels for easy access.
Telephone Influence Factor:
THF(BS EN60034-1)<2%
THF(NEMA MG1-22)<50
SHAFT AND KEY
All generator rotors are dynamically balanced to better than minimum vibration of BS6861: part1 grade 2.5 double bearings generators are banlanced with a half key.
ENGINE ADAPTOR AND COUPLING
All generators are designed two kinds of construction. The adaptor and the drive plate is consonant with SAE standard.
LEVELS Of PROTECTION
All generators are IP2 and IP23 and IP44 can be optional for aircool protected generator. but rated power will decrease 5~10%.
The Definition Of The Product Model:
Model | Rated Output(KW) | Rated Capacity(KVA) | Rated Vottage(V) | Rated Current(A) | Power Factor(Cosф | Rated Speed(r.p.m) | Rated Frequency(Hz) | Gro$$ Weight(Kg) |
YB164A | 6.5 | 8.1 | 400 | 12.3 | 0.8 | 1500/1800 | 50/60 | 95 |
YB164B | 8.8 | 11 | 400 | 15.8 | 0.8 | 1500/1800 | 50/60 | 102 |
YB164C | 10.8 | 13.5 | 400 | 19.5 | 0.8 | 1500/1800 | 50/60 | 110 |
YB1640 | 12.8 | 16 | 400 | 23 | 0.8 | 1500/1800 | 50/60 | 116 |
YB184E | 18 | 22.5 | 400 | 32.5 | 0.8 | 1500/1800 | 50/60 | 141 |
YB184F | 22 | 27.5 | 400 | 39.7 | 0.8 | 1500/1800 | 50/60 | 164 |
YB184G | 2S | 31.3 | 400 | 45.1 | 0.8 | 1500/1800 | 50/60 | 180 |
YB184H | 30 | 37.5 | 400 | 54.1 | 0.8 | 1500/1800 | 50/60 | 230 |
YB184J | 32 | 40 | 400 | 57.7 | 0.8 | 1500/1800 | 50/60 | 240 |
YB224C | 34 | 42.5 | 400 | 61.4 | 0.8 | 1500/1800 | 50/60 | 225 |
YB224D | 40 | 50 | 400 | 72.2 | 0.8 | 1500/1800 | 50/60 | 270 |
YB224E | 48 | 60 | 400 | 86.6 | 0.8 | 1500/1800 | 50/60 | 290 |
YB224F | 58 | 725 | 400 | 104.6 | 0.8 | 1500/1800 | 50/60 | 330 |
YB224G | 68 | 85 | 400 | 122.7 | 0.8 | 1500/1800 | 50/60 | 370 |
YB274C | 80 | 100 | 400 | 144.3 | 0.8 | 1500/1800 | 50/60 | 435 |
YB274D | 91 | 114 | 400 | 173.2 | 0.8 | 1500/1800 | 50/60 | 460 |
YB274E | 112 | 140 | 400 | 202 | 0.8 | 1500/1800 | 50/60 | 510 |
YB274F | 128 | 160 | 400 | 225.5 | 0.8 | 1500/1800 | 50/60 | 550 |
YB274G | 140 | 175 | 400 | 259.8 | 0.8 | 1500/1800 | 50/60 | 550 |
YB274H | 160 | 200 | 400 | 288.7 | 0.8 | 1500/1800 | 50/60 | 650 |
YB314C | 200 | 250 | 400 | 360.8 | 0.8 | 1500/1800 | 50/60 | 910 |
YB314D | 236 | 295 | 400 | 433 | 0.8 | 1500/1800 | 50/60 | 975 |
YB314E | 260 | 325 | 400 | 469 | 0.8 | 1500/1800 | 50/60 | 1055 |
YB314F | 304 | 380 | 400 | 548.5 | 0.8 | 1500/1800 | 50/60 | 1183 |
YB354C | 360 | 450 | 400 | 656.8 | 0.8 | 1500/1800 | 50/60 | 1350 |
YB354D | 400 | 500 | 400 | 721.7 | 0.8 | 1500/1800 | 50/60 | 1450 |
YB354E | 480 | 600 | 400 | 880.5 | 0.8 | 1500/1800 | 50/60 | 1598 |
YB354F | 536 | 670 | 400 | 967.1 | 0.8 | 1500/1800 | 50/60 | 1753 |
Alternator Features:
1)Advanced automatic voltage regulator control for trouble-free operation under the most demanding condition
2)Easy paralleling with mains or other generators .Standard 2/3 pitch windings avoid excessive neutral currents.
3) Dynamically balanced rotor, with sealed-for-life ball bearings and single or two-bearing construction.
4)Simple installation and maintenance with easy access to terminals, rotating diodes and coupling bolts.
5)Wide range of Flange adaptor and single bearing coupling disc.
All of alternator rotors should pass balance test, whose vibrations are lower than the minimum of BS6861 P.1,G 2.5 two bearing alternator has a half-key testing balance
Terminal and terminal box
The three-field alternator had 12 leads brought out to the terminals in the terminal box. The terminals are put on the non drive end . The box is equipped with removable panels.
Winding and electric features
2/3 pith winding design can effectively eliminate the third harmonic wave(3th.9th,15th) of the voltage ,which is the best design of UPS for nonlinear load .Connected with the network in parallel, the structure can restrain excessive currents in the midline. This and the 2/3 pitch help to check the wave distortion and output voltage.
Accessories & Option
Droop kit for sharing of reactive current during parallel operation
Remote voltage potentiometer
PT100 thermal protection embedded in stator windings
Anti condensation heaters
IP23 protection
Special treatment for damp-saline or corrosive Environment
PMG
Control panel with LCD digital meter
Δ FAQ (FREQUENCY ASKED QUESTION)
Question: What's your warranty period?
Answer: Our payment terms is 1 year or 1000 running hours whichever comes first.
But based on some special project, we can extended our warranty period.
Question: Does your generators has global warranty?
Answer: Yes, most of our products like Cummins, Perkins, Doosan power generator enjoy the global warranty service.
And the alternator we use like Leroysomer, Stamford, marathon also enjoy the global warranty service, so you do not need to worry about the aftersales service.
Question: Do you accept OEM/ODM service?
Answer: Yes, we can accept OEM & ODM service.
Question: What's your payment terms?
Answer: We can accept T/T 30% in advance, and the balance 70% shall be paid before shipment.
Or 100% irrevocable confirmed L/C at sight.Question: What's your delivery time?
Answer: Our normal delivery time is 15 - 25 working days.
But if your order is some special engine and alternator, then the delivery time is longer.
Question: What's the MOQ?
Answer: 1 Set
Contact information: