Basic Level: Mobile Hydraulics – Working Hydraulics Mechatronics Training Equipment Educational Equipment Teaching Vocational Education Training Equipmen
China Basic Level: Mobile Hydraulics – Working Hydraulics Mechatronics Training Equipment Educational Equipment Teaching Vocational Education Training Equipmen, Find details about China Proportional Pneumatic Trainer, Mechatronics Trainer from Basic Level: Mobile Hydraulics – Working Hydraulics Mechatronics Training Equipment Educational Equipment Teaching Vocational Education Training Equipmen
AH203 SSEDU Basic Level: Mobile Hydraulics – Working Hydraulics mechatronics training equipment educational equipment teaching vocational education training equipmen Jinan
I. Product description
1.1 Overview
This hydraulic training device adopts the open structure operation panel design according to the syllabus requirements of mechanical and electrical integration of colleges and universities for gas, electricity and hydraulic control, combined with the advantages of pneumatic relay control and hydraulic relay control experimental equipment. Various hydraulic components can be flexibly installed on the operating panel. All joints adopt open-close quick joints at both ends, which solves the problem of oil leakage in the hydraulic circuit, is convenient and durable, reduces losses and also helps maintain environmental sanitation. Arbitrary combination of various components to form a hydraulic system with certain functions, with strong practicality.Equipment constitute:
| No | Component name | Unit | Quantity |
| 1 | Equipment stand | Set | 1 |
| 2 | Feed mechanism | Set | 1 |
| 3 | Pneumatic manipulator | Set | 1 |
| 4 | Material sorting mechanism | Set | 3 |
| 5 | Sensor detection mechanism | Set | 1 |
| 6 | Silence type compress air pump | Piece | 1 |
.2 Features
(1) The equipment is composed of a high-strength sheet metal frame, which is beautiful and durable. The bottom is equipped with universal wheels for easy movement; equipped with a cabinet for storing tools and devices, and the hydraulic station is integrated in the lower part of the equipment; various hydraulic valve blocks are fixed The substrate adopts special substrate profiles, and the groove interval of the panel is 25mm, which can easily plug various components on it; the upper part of the electronic control hanging box is placed, the whole is compact.(2) Equipped with industrial series hydraulic valves, the maximum working pressure can reach 35Mpa. Each hydraulic component is equipped with an oil circuit transition base plate, which can be conveniently and freely placed on the panel. The oil circuit lap connection adopts open-close quick-change joints, which is convenient for disassembly and connection, does not leak oil, reduces loss and also helps maintain environmental sanitation.
II. Performance parameter
(1) Input power: AC: 220V(2) Experimental table size: 1650 (length) × 700 (width) × 1800 (height)
(3) Aluminum alloy panel size: 1200 (length) × 750 (width)
(4) Groove interval: 25mm
(5) Specifications: Cabinet: 1
(6) Desktop structure: 1
(7) Casters with split grooves: 4
(8) Safety limit speed range: 1000-1500 rpm
(9) The noise at a distance of 1.5m from the hydraulic platform when the hydraulic pump is working is less than or equal to 58dB0
(10) Demonstration experiment requires only 4-6Mpa for fluid flow pressure
(11) Fuel tank: Nominal volume 35L
3.1 Electric control unit
The electrical control unit includes a master control switch hanging box, a DC power supply hanging box, an emergency stop hanging box, a relay hanging box, and a button hanging box.
3.2 Training platform
The training platform is composed of aluminum profiles and aluminum alloy substrates, which can be moved and positioned flexibly. The actuator control box is installed on the base plate, which is beautiful and generous.
3.3 Power configuration
Single-phase three-wire power input, protected by insurance, is equipped with a main power switch. In an emergency, turn off the main power switch to stop the execution object.
3.4 Hydraulic Components
Picture, model and Chinese name of hydraulic components.
- Balance valve DC6G-1-10B/50/2
- Diaphragm accumulator:
- 3-way pressure regulator:DR6DP-50/75
- pressure relief DBDH6P/100
- flow control valve DV8/1
- 1 unit shuttle valve double nonreturn valve, delockable 4WE6J-6X /ED24V
- 6/3-way proportional units: hand lever valve
- loading unit / cylinder
- loading unit / cylinder
- pressure compensator for open center load sensing:
- hydraulic motor
- anti-shock unit and anti-cavitation block:Direct-acting relief valve DBDH6P/100
- 4/3-way hand lever valve:4WMM6D50B/
- Electronics pressure switch:Setting method:
Press SET again, AH (upper limit pressure) will appear, press the upper key to adjust the upper limit stop value,
Press SET again, SAVE (data saving) appears,
Press SET again to return to the measurement interface,
Click to run, you can use it.
For example: 0.5Mpa start 0.8mpa stop
AL is set to 0.5mpa, AH is set to 0.8mpa, the contact between yellow and blue is normally open, and the pressure is within the setting range.
- Flow sensor
- Steering valve(orbitrol)
- Tubing line for pressureless DR10/200Y
- manifold plates
- T-distributors,return header, 4-way, pressureless and nonreturn valve
- Oil tube
- Hydraulic power station
IV. Precautions
1. The incoming power supply of the experimental device should be correctly connected, and the grounding should be good and reliable.2. When using, keep your hands dry and clean, and pay attention not to scratch the surface of the equipment with sharp objects.
3. During the experiment, after the wiring is correctly connected, the instructor should confirm that it is correct before energizing the experiment. It is strictly forbidden to touch the live parts with your hands or conductive objects, and you will be responsible for the electric shock in violation of regulations.
4. After using the experimental device, turn off the main power switch and unplug the power plug from the socket.
5. When the cylinder and conveyor belt are working, it is strictly forbidden to touch the cylinder push rod and the motor rotating shaft with your hands to avoid accidental injury.
6. When encountering an emergency, disconnect the system power supply or turn off the main power switch of the control box in time.
V. Experiment content:
Experiment 1. Reversing circuit of hand lever valveExperiment 2. The reversing circuit of the shuttle valve double nonreturn valve,delockable
Experiment 3. Single-stage regulator circuit
Experiment 4. Single-stage pressure reducing circuit
Experiment 5. Secondary pressure reducing circuit
Experiment 6. Unloading circuit using 4/3-way hand lever valve
Experiment 7. Unloading circuit using 4/2-way lever valve
Experiment 8. Balance circuit with sequence valve
Experiment 9. Brake circuit with overflow valve
Experiment 10 Secondary pressure circuit
Experiment 11. Throttle speed regulating circuit of oil inlet
Experiment 12 Throttle and speed control circuit
Experiment 13. Throttle speed regulation circuit
Experiment 14. Throttle valve parallel circuit
Experiment 15. flow control valveseries circuit
Experiment 16. Locking circuit using shuttle valve double nonreturn valve,Delockable
Experiment 17. loading unit test loop
Basic electro-pneumatic components for each bench:
- electric buttons module
- electric relays module
- temporized relays module
- electronic pre-selection counter module
- emergency stop button
- inductive proximity sensor
- capacitive proximity sensor
- distributor terminal
-swing check valve
- electro-distributor with LED
- manometer
- pressure supply distributor with filter pressure reducer
Pneumatic regulation components:
- electric buttons module
- push button normally closed
- proportional electro-distributor (5/3, …)
- electro-distributor with LED (5/3 normally closed, 3/2 normally closed, …)
- monometer
- unidirectional flow limiter
- pressure supply distributor with filter pressure reducer
- air cross connect
- plastic hoses
- linear actuator, with guidance and all necessary accessories
- PID regulator
- comparison card
- analog pressure sensor
- pneumatic capacitors
- status regulator
- all necessary accessories for pneumatic regulation (potentiometer, damper, weight, …)
PLC equipped at least by:
- 24 VDC power supply
- Processor: 192 k bytes or better, memory 512 K bytes or better
- network interfacing (Profinet, Ethernet, USB, …)
- 16 digital inputs 24 VCC, potential separation LED light indication
- 16 digital outputs 24 VCC, 0.5A with galvanic separation and protection against short circuit
- 2 analog inputs
- 2 analog outputs
Supplied with Siemens S7-314CPLC:
- multi-users software teaching edition PLC programming including different languages(we supply free edition(free editon) software with unlimited users)
- connection PC-PLC
- spare parts set
- accessories set:
. electrical wires
. plastic hoses
. hoses connecting tools
. spare parts of first use
- practice activities manual book
- instruction book for the teacher including solutions for the practice activities
- silent air compressor with 30L, 8 bars minimum
- multi-users software for pneumatic and electromagnetic circuit simulation.
Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time. Please se photo for foreign sales department and photo for spare parts.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Company Information
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today's and tomorrow's careers.
Photo for Clients Visiting Factory
Photo for Workshop and Equipments
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Shouldshine, SSEDU, JSS. |
8 | Production time | From 10 days to 60 days according to different items |
You Might Also Like
Low Cost 2-8mm Coffee Husk Hen Feed Press for Pakistan
Nice Design 90km Mileage Electric Scooter with Front Basket
A356 Aluminum Sand Casting Parts
3-Blade Aluminum Outboard Propeller
Mercedes Benz W639 Vito Viano Air Compressor 6393200204 6393......
Made in China Metal Zinc Alloy Soft Enamel Sport Medallion C......
10t 30t 40t Locosc Shear Beam Weighing Load Cell for Weighbr......
4.1kwh Lithium Battery Wall Mount LiFePO4 24V 160ah Deep Cyc......
A3 Size DTG Tshirt Jeans Jackets Printer for Dark Light Colo......
PVC Co-Extrusion Foam Board with Cheaper Price
Superior Popular Art Fineliner Drawing Pen with Water Proof ......