Forklift Parts Cylinder Spare Parts Forklift Tilt Cylinder for Sale
China Forklift Parts Cylinder Spare Parts Forklift Tilt Cylinder for Sale, Find details about China Forklift Tilt Cylinder, Forklift Parts Cylinder from Forklift Parts Cylinder Spare Parts Forklift Tilt Cylinder for Sale
Basic Info.
Model NO.
YY-TLF-B382072-AQ
Advantage
High Quality Forklift Parts
Manufacturer
Genuine Forklift Parts Maker
Trademark
Leading forklift parts
Transport Package
Corrugated Carton with Plywood Case
Specification
60*15*15cm
Origin
China
HS Code
8431390000
Model NO.
YY-TLF-B382072-AQ
Advantage
High Quality Forklift Parts
Manufacturer
Genuine Forklift Parts Maker
Trademark
Leading forklift parts
Transport Package
Corrugated Carton with Plywood Case
Specification
60*15*15cm
Origin
China
HS Code
8431390000
Product Desciption
Product Title: Forklift parts cylinder spare parts forklift tilt cylinder for sale
Product Model: Lift truck tilt cylinder YY-TLF-B382072-AQ
Lift Truck Tilt Cylinder
Lift truck tilt cylinder is installed on the forklift upright mast. Lift truck tilt cylinder is mainly composed of the main parts such as the piston, cylinder body, piston rod, upper cover, lower cover, compression nut and cover nut.
Inspection and Repair of Lift Truck Tilt Cylinder
1. After disassembling lift truck tilt cylinder, the forklift cylinder parts should be carefully cleaned and dried.
2. Check the coaxiality of the forklift piston and forklift piston rod. Mount the forklift piston rod on the V-shaped frame and check with a dial indicator. If the accuracy of the forklift piston does not meet the accuracy requirements and is out of tolerance, it should be replaced.
3. Check if the piston of the forklift is bent. Check with V-shaped frame and dial indicator. When it is bent, it should be corrected and repaired.
4. When the surface of the forklift tilt cylinder is seriously worn or scratched, it can be repaired by honing.
5. If the inner hole of the forklift guide tube is seriously worn or scratched, it should be replaced.
5. If the leather cup and forklift sealing ring are worn and broken, they should be replaced. When an O-ring seal is used on a forklift piston, it generally loses its original shape after several years of use and should be replaced.
7. The clearance between the repaired tilt cylinder inner surface and the forklift piston should be 0.04-0.13mm, but the clearance should not be greater than 0.25mm.
8. The gap between the piston rod of the forklift and the guide sleeve is 0.04-0.15mm. If the gap is greater than 0.45mm, the guide sleeve should be replaced.
Specifications of Lift Truck Tilt Cylinder
Product Model: Lift truck tilt cylinder YY-TLF-B382072-AQ
| Item | Description |
| Product Name | Lift truck tilt cylinder (Tailift 5T) |
| P/N | YY-TLF-B382072-AQ |
| Applied Model | Tailift 5T (AQ original ) |
| Net Weight (kg) | 15 |
| Gross Weight (kg) | 17 |
| Qty per Carton | 1 |
| Carton Size (cm) | 60*15*15 |
Lift Truck Tilt Cylinder
Lift truck tilt cylinder is installed on the forklift upright mast. Lift truck tilt cylinder is mainly composed of the main parts such as the piston, cylinder body, piston rod, upper cover, lower cover, compression nut and cover nut.
Inspection and Repair of Lift Truck Tilt Cylinder
1. After disassembling lift truck tilt cylinder, the forklift cylinder parts should be carefully cleaned and dried.
2. Check the coaxiality of the forklift piston and forklift piston rod. Mount the forklift piston rod on the V-shaped frame and check with a dial indicator. If the accuracy of the forklift piston does not meet the accuracy requirements and is out of tolerance, it should be replaced.
3. Check if the piston of the forklift is bent. Check with V-shaped frame and dial indicator. When it is bent, it should be corrected and repaired.
4. When the surface of the forklift tilt cylinder is seriously worn or scratched, it can be repaired by honing.
5. If the inner hole of the forklift guide tube is seriously worn or scratched, it should be replaced.
5. If the leather cup and forklift sealing ring are worn and broken, they should be replaced. When an O-ring seal is used on a forklift piston, it generally loses its original shape after several years of use and should be replaced.
7. The clearance between the repaired tilt cylinder inner surface and the forklift piston should be 0.04-0.13mm, but the clearance should not be greater than 0.25mm.
8. The gap between the piston rod of the forklift and the guide sleeve is 0.04-0.15mm. If the gap is greater than 0.45mm, the guide sleeve should be replaced.
Specifications of Lift Truck Tilt Cylinder
| Name | Unit | Parameter |
| Cylinders diameter (piston diameter) | mm | 40~160 |
| Rod diameter (piston rod diameter) | mm | 20~120 |
| Stroke | mm | 50~2500 |
| Pressure | MPa | 16~25 |
| Operating temperature | ºC | -40~120 |
| Piston rod coating NSS neutral salt spray test time | H | ≥96 |
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover