Efficient air supply outlet

The high efficiency air supply port is the terminal high efficiency filter device, which is mainly composed of static pressure chamber, high efficiency filter and dispersive flow plate.

Design features

1. The outer shell is made of high quality cold-formed steel plate with electrostatic spraying on the surface;

2. Ensure the jet speed of air flow and prevent the generation of eddy current;

3. Beautiful appearance, less investment, simple structure, convenient installation, strong versatility and simple maintenance.

Notes for installation of efficient air supply outlet:

1. Before installation, it is important that the size efficiency requirements of the efficient air supply inlet conform to the on-site design requirements of the clean room and customer application standards.

2. Before the installation of the efficient air supply outlet, the product should be cleaned and cleaned and the cleaning room should be thoroughly cleaned. For example, the dust in the air conditioning system should be cleaned and cleared

The air conditioning system must be run continuously for more than 12 hours and cleaned again.

3.The safe transport of the efficient air supply port should be put in strict accordance with the sign and direction of the production manufacturer, and should be handled and placed lightly in the transport process to avoid violent vibration and collision.

4. Before the installation of the efficient air supply port, the appearance inspection of the air supply port packaging shall be carried out on site, including whether the filter paper, sealant and frame are damaged;Whether the length, diagonal line and thickness dimensions meet the requirements;Frames without burrs and rust spots (metal frames);There is no product qualification certificate, whether the technical performance meets the design requirements.

5. Conduct efficient air supply inlet leak detection, check and check whether the leakage is qualified. Reasonable distribution should be made according to the resistance size of each air supply outlet.The level of cleanliness is equal to and higher than the level 100 clean room of the efficient air outlet.

6. In the clean room, the joints between the tuyere flanging edge of the efficient air supply inlet and the ceiling plate shall be treated with sealing gasket. Remember that the places with cracks must be treated strictly.Avoid high efficiency air supply mouth damage or coating damage shall not be installed, the air supply mouth installation and air duct must be strictly connected, and the open end shall be reinforced with plastic film and tape.The above seven points should be carefully followed with a little error, which directly affects the cleanliness standards of the whole clean room.Enterprises need to choose the whole product design, production and installation strength of the purification equipment manufacturers.





 Suzhou Comfort Environment Technology Co.,Ltd was founded in 2014,which has more than 4,000 square meter production area and 100 employees.The core advantage of our company is from our Management and R&D team,which focusing on air purification industry more than 10 years experience.            
 We mainly R&D and produce whole series of air filter types that can meet all kinds of different demands from clients,includes separator HEPA filter,Mini-pleat ULPA filter,Mini-pleat HEPA filter,Gel-HEPA filter,HT HEPA filter,Medium efficiency filter,pocket filter,V-Bank filter,metal mesh filter,Activated Carbon filter etc..At present,our full line of air filters not only supply to domestic different kinds of industry,also export to the Southeast Asia countries,Australia countries,European and American countries.              
"Total Filtration Solution" be regarded as our company service concept,from a single filter products extends to run,operate and design the solution of air filtration,to solve clients'  all-sided air filtration demand.


FAQ
Q1. Can the products be customized?
Yes, both the products and the packaging can be in customized.
Q2. What is your terms of payment?
A: We accept the western union/Money Gram/ T/T,L/C;
Q3. How long is the leading time?
A: Generally, 20ft container take 7 to 15 working days on payment. A 40ft container takes 15-25working days.
Q4. Do you accept sample order before bulk order?
A: Yes, we can produce by your samples as your design drawings.And we have our tech dpt. Can help your product developing.New Moulding takes about 7-15working days.
Q5. Do you test all your goods before loading?
A: Yes, we have 100% rigorous test before delivery.
Q6.What is the after-service policy?
Within the service life of the products, our company is there responsible for the using and maintain instruction.