Products

V-Shaped Profile Wire Screen Flat Panel Screen

China V-Shaped Profile Wire Screen Flat Panel Screen, Find details about China Wedge Wire Screen, Custom Flat Wedge Wire Screen Panel from V-Shaped Profile Wire Screen Flat Panel Screen

Model NO.
GX5000
Trademark
GUANGXING
Transport Package
Wooden
Specification
1000*3000mm
Origin
Hebei, Hengshui
HS Code
8421999090
Model NO.
GX5000
Trademark
GUANGXING
Transport Package
Wooden
Specification
1000*3000mm
Origin
Hebei, Hengshui
HS Code
8421999090
V-shaped Profile Wire Screen flat  panel screen 
 

FLAT WEDGE SCREEN PANEL

Welded wedge wire screen panels can be constructed using rectangular support rods or round support rods. They are the most widely used type of wedge wire screens mainly in the mineral processing both for stationery as well as vibratory decks.

Flat screen panel can be designed to optimize the open area, strength and wear life for each application. The panels are either continuously or intermittently welded on the lower side of loop to provide complete rigidity to the panels thus becoming very effective in transmitting the vibrations without mechanical failures.

  1. Flat Screen with round support rods.
  2. Flat Screen with rectangular support rods.
  3. Screen Panel with side frame.
  4. Heavy duty wedge wire.


Material: AISI316L, AISI304, Others

Specification:

1. The Arc angle of the screen: 120°or as client's request
2. The slot: usual slot size: 50μm, 75μm, 100micorn, 200 micron, or as client's request.
3. The flow rate: 34-46 M3/H
4. Working Pressure: 0.2-0.4Mpa
5. Sieve bend Screen Width: 585mm, 710mm, 825mm, others according to client's request
6. The sieve bend screen arc radius: 762mm

V-Shaped Profile Wire Screen Flat Panel ScreenV-Shaped Profile Wire Screen Flat Panel ScreenV-Shaped Profile Wire Screen Flat Panel Screen

The working principle and the structures of the screen

pressure curved sieve is a kind of the high efficiency working screen that working by the pressure, and it is make up with the sieve screen, the sieve case, feeding device and exit device.

The sieve screen is the key part of the pressure sieve bend screen. It is made by stainless steel wedge wire and support wire.
When the working pressure is 0.2-0.4Mpa, the wet material will be erupt from the exit device.
The wedge wire could become the knife edge, it could help to shaving the material to a thin layer, and make the fine material and water Evenly spread out.
Reading of the "shaving effect". It will help to grading easily, Then all the screen should cleaned. The surface material will be expel from the dross hole, and the fine material will enter the stock outlet.

The process conditions and affecting the sieving effect factors
The working pressure must be 0.2-0.4Mpa, the higher pressure, the higher sieve efficiency. Inverse, the lower pressure, the lower siece efficiency.


At the first sieve process, it will content about 7% fine dry material, then sieve the starch milk.
10-11BX, in the thin pulp, the SO2 content will be about 0.035-0.045%

Key Words: Pressure Sieve Bend Screen, Pressure Sieve screen,Hydraulic screen, Gravity curved screen, sieve bend scree, 120 degree sieve bend pressure screen, slot screen, curve screen, Gravity Sieve

Sieve plate, Sieve Bend screen for starch, Wedge wire screen, Corn water screen

V-Shaped Profile Wire Screen Flat Panel ScreenV-Shaped Profile Wire Screen Flat Panel ScreenV-Shaped Profile Wire Screen Flat Panel Screen

The wedge wire screen panel is an important working part of the screening machine to complete the screening process. Each screening machine must select a sieve plate that meets its working requirements. The various characteristics of the material, the different structures of the sieve plate, the material and the various parameters of the sieve machine have a certain influence on the screening ability, efficiency, running rate and life of the vibrating screen. 

Different materials and different places should use different sieve plates to achieve the best effect of screening. The sieve plate should have sufficient strength, high opening ratio and difficulty in plugging holes. When the vibrating screen vibrates, the wedge wire sieve plate passes through materials of different shapes and sizes, material size, and under the action of vibration force, the materials of different particle sizes are separated to achieve the purpose of classification.


 
Company Information
Hengshui Guangxing Screens Co.,Ltd is a leading manufacturer of water well screen, flat panel screens, intake screens, rotary drums, cartridges and fabricated stainless wedge wire screen products. 

Our factory founded in 1986 to produce the best possible profile wire screens available. 
We provide screening solutions to almost every industry, including:

Water Well,

Food &Beverage Screens,

Pharmaceutical & Biological industries, 

Refining & Petrochemical, 

Water Treatment & Liquid / Solids Separation, 

Mineral & Aggregate Processing, 
Pulp & Paper Screens.  
Guangxing Screens is producing wedge wire and profile wire in several materials, with a wide variety of sizes, shapes and precision openings. 
For over 30 years, Guangxing Screens has continuously produced metal products for customers seeking a competitive advantage in their industry. Guangxing Screens is an ISO-9001:2008 registered company.

We are committed to producing quality products which meet or exceed both customer and industry standard. The majority of our products are exported to original equipment manufacturers of 35 countries of Europe, America, Africa, and Asia.
We know our customers and we listen to them and respond quickly to their needs. 
Can't find what you 're looking for?

Contact us , we could work with you to find a solutions.

V-Shaped Profile Wire Screen Flat Panel Screen

You Might Also Like