Bipolar Pulse Micro Arc Oxidation Power Supply

China Bipolar Pulse Micro Arc Oxidation Power Supply, Find details about China Oxidation Power Supply, 800V Oxidation Power Supply from Bipolar Pulse Micro Arc Oxidation Power Supply

Model NO.
ACME-800V-300A
Voltage Regulating Mode
Width Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
Two-way Transmission
Modulation System
PWM
Certification
CE, ISO
Brand
Acme
Input
220V/380V
Input Mode
1 Phase 2 Wires/3 Phase 4 Wires
Control Mode
PWM
Power
10va-800kVA
Start
Soft Start
Output Voltage
80-800V/-20--200V
Output Current
0-+/-300A
Load Change Rate
0.5%
Efficiency
90%
Frequency
30-3000Hz
Duty Cycle
0-100%
DC Output
Pure DC Output
Auto Reverse
Can Be Set Time
External Control
RS485/Modbus/RS232
Working Mode
CV and Cc
Trademark
ACME
Transport Package
Wood Packing
Specification
300kw
Origin
Jinan
HS Code
8504401990
Model NO.
ACME-800V-300A
Voltage Regulating Mode
Width Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
Two-way Transmission
Modulation System
PWM
Certification
CE, ISO
Brand
Acme
Input
220V/380V
Input Mode
1 Phase 2 Wires/3 Phase 4 Wires
Control Mode
PWM
Power
10va-800kVA
Start
Soft Start
Output Voltage
80-800V/-20--200V
Output Current
0-+/-300A
Load Change Rate
0.5%
Efficiency
90%
Frequency
30-3000Hz
Duty Cycle
0-100%
DC Output
Pure DC Output
Auto Reverse
Can Be Set Time
External Control
RS485/Modbus/RS232
Working Mode
CV and Cc
Trademark
ACME
Transport Package
Wood Packing
Specification
300kw
Origin
Jinan
HS Code
8504401990
Overview
Bipolar Pulse Micro Arc Oxidation Power SupplyBipolar Pulse Micro Arc Oxidation Power Supply
Micro arc oxidation (MAO) is a new surface treatment technology developed on the basis of conventional anodization. It is a kind of technology that puts Al, Mg, Ti and other valve metals or their alloys in electrolyte, makes spark discharge on the surface of materials by electrochemical method, and forms in-situ oxidation film with ceramic characteristics on the surface of materials under the joint action of thermochemistry, plasma chemistry and electrochemistry.

The micro arc oxidation power supply can be used for micro arc oxidation of aluminum alloy, magnesium alloy and titanium alloy (with different electrolyte), which should be reserved in the design.

The micro arc oxidation treatment adopts a new electrolyte with long-term effect and no environmental limiting elements, which has the advantages of fast film forming speed, compact film and no loose layer. There is no waste gas escaping and no waste water discharging in the treatment process, and the cleaning water can be used as supplementary water for the oxidation tank in the oxidation process. Perfect technology, green environmental protection.

Process plan
Bipolar Pulse Micro Arc Oxidation Power Supply

2 Technical requirements for main processes
(1) Oxidation: remove the floating dust and obvious oil on the surface of the workpiece before oxidation, and seal the parts that do not need to be oxidized.
(2) Spray
The spray head direction and spray pressure are adjustable. The time was controlled in 1-2 minutes; The spray water shall be replaced once a week, and the wastewater after replacement shall be used as make-up water for oxidation tank.
(3) Immersion washing
The soaking time is about 1-2min. The soaking water is replaced once a month, and the replaced wastewater is used as supplementary water for spraying.

3 Main functions of Mao power supply:

1. The power supply is designed and manufactured with high-power IGBT and full switch inverter circuit;
2. Users can set it according to the maximum value of the actual output power, constant current mode;
3. The controller is designed and programmed by DSP digital chip to realize full digital control;
4. 10 inch color touch screen display and operation;
5. RS485 interface, optical fiber data transmission, can realize remote control and display, provide communication protocol;
6. Air cooled, equipped with temperature probe to prevent excessive temperature difference;
7. Over current, short circuit, over-voltage (high output voltage), over temperature (IGBT working temperature) and open phase protection;
8. Constant current, manual constant voltage working mode;
9. Multiple process curve setting, positive and negative pulse ratio setting;
10. The power supply uses high-frequency inverter, and the output stage uses high-power IGBT as chopper;
11. Cabinet size: width 1800, height 2000, depth 1000, (actual delivery size is subject to) spray plastic, gray white cabinet, wire drawing aluminum panel;

Positive output working parameters: (can be adjusted according to customer needs)
 
Ma. power: 300kW or customed
Operating voltage:
at least
+U from 80 to 800V;
-U from 20 to 200V;
Operating current:
+ 300A or customed
- 300A or customed
Frequency:
at least from 30 to 3000 Hz
Display:
The machine is equipped with a display to control of set and actual parameters as well to provide the ability to connect a computer and perform real-time voltage and current strength measurements. Reports bugs in ongoing  processes
Operating modes:
Manual voltage control / automatic
control; Bipolar pulse or unipolar pulse
constant voltage output (CV) and
direct current (CA) operating modes
Power supply:
3-fase, 380V AC
Control:
Both positive and negative outputs
frequency, voltage, current and
the duration and number of work cycles can be adjusted
separately
Protection:
- Automatic overheating protection
against high voltage and current
strength as well as phase mixing.
- Built-in fan and water
circulation cooler (chiller)


Bipolar Pulse Micro Arc Oxidation Power Supply
Bipolar Pulse Micro Arc Oxidation Power Supply