Mineral Sump Submersible Vertical Slurry Pump
China Mineral Sump Submersible Vertical Slurry Pump, Find details about China Sum Pump, Bp Verticalslurry Pump from Mineral Sump Submersible Vertical Slurry Pump
Basic Info.
Model NO.
BP vertical slurry pump
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Semi-Open
Usage
Pump
Vertical Slurry Pump Condition
New
Vertical Slurry Pump Work Site
Under Liquid
Certificate
TUV/SGS/ISO/Ce/BV
Trademark
An Pump
Transport Package
Fumigated Wooden Case
Specification
Class One
Origin
China
HS Code
8413709990
Model NO.
BP vertical slurry pump
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Semi-Open
Usage
Pump
Vertical Slurry Pump Condition
New
Vertical Slurry Pump Work Site
Under Liquid
Certificate
TUV/SGS/ISO/Ce/BV
Trademark
An Pump
Transport Package
Fumigated Wooden Case
Specification
Class One
Origin
China
HS Code
8413709990
Product Desciption
Mineral Sump Submersible Vertical Slurry Pump
>> General information about
Series BP(R) vertical pump is centrifugal vertical sump pump, work under fluid. It widely used for delivery abrasive, high density slurry with large particle in the metallurgy, mine, power plant, chemical, and other industry.
>> Performance Range about
Flow rate: 17~1267m3/h
Head: 4~40m
Outlet pressure: 4Bar
Outlet flange: 40~300mm
>> Perfomance data for
>> Performance table list for
>> Parts details about
1. All of the metal wet parts can are made of high chromium alloy which has superior wear and erosion resistance or grey iron which has a high rigidity.
2. As the expeller ring is assembled together with the expeller, much pressure can be reduced effectively for the impeller. Meanwhile, it can still maintain a reliable sealing performance.
3. The parts such as labyrinth, labyrinth locknut, end cover and shaft sleeve are used for bearing assembly; these parts can be changed easily and have high accuracy and longer service life.
4. Some fastening parts such as studs and bolts can be used for fixing the other parts securely. All the fastening parts can be attached easily, ensuring the safety.
5. All of the rubber parts have superior erosion resisting performance which can be used for a long life.
>> Material of
>> Strictly material components controlling procedure about
a) Analysis before and after the stove
b) Professional mould keeping and using
c) Impeller balance testing and revising by advanced quipment
d) Delicate both in dimension and surface
>> Main parts material list about
>> Our service
1. Offer vertical slurry pump solution design as working condition,
2. Offer Installation & adjustment in working condition,
3. Accept OEM
4. Select centrifugal vertical slurry pump & related equipment,
5. Sample available.
>> Other services details about
>> Key points about
Wet pit pump do not need any Shaft seal and Shaft seal water,it is still workable without enough water.
>> Applications about
Minerals processing and Tailing delivery CIL (Carbon-In-Leaching) gold processing
Accident slurry return Coal preparation
Sand and gravel discharging Chemical processing
Effluent handing
>> Application list about
>> Designing Features about
1. Material construction optional
BP: abrasion resisting metal construction vertical slurry pump
BPR: anti-corrosive rubber construction vertical slurry pump
2. Do not need any shaft seal or sealing water. Also worked well under insufficient suction duty.
3. The type with "L" is the pump with extension shaft. It suitable to deep condition. It has guid bearing. So it more stable and used more wide. However the flushing water is necessary on the guide bearing part.
4. The agitator/Cutter is available
Series BP(R) vertical pump is centrifugal vertical sump pump, work under fluid. It widely used for delivery abrasive, high density slurry with large particle in the metallurgy, mine, power plant, chemical, and other industry.
>> Performance Range about
Flow rate: 17~1267m3/h
Head: 4~40m
Outlet pressure: 4Bar
Outlet flange: 40~300mm
>> Perfomance data for
| Item | Data |
| Capacity(Flow rate) (Q) | 17~1267m3/h 4.7~352L/S |
| Head (H) | 4~40m |
| Speed | 350~2200rpm |
| Max Passed Particle Size | 65mm |
| Slurry Density | 60% |
| Slurry PH Rate: | 2~11 |
>> Performance table list for
| No. | Part Name | Part No. |
| 1 | Bearing housing | 004 |
| 2 | Bearing sleeve | 008 |
| 3 | Bearing | 009 |
| 4 | Bearing | 009D |
| 5 | Back liner | 041 |
| 6 | Suction joint | 060 |
| 7 | Shaft | 073 |
| 8 | Shaft sleeve ejector | 077 |
| 9 | Bearing seal | 089 |
| 10 | Casing | 092 |
| 11 | Column | 102 |
| 12 | Strainer | 116 |
| 13 | Discharge pipe | 154 |
| 14 | Flinger | 184 |
| 15 | Impeller | 206 |
| 16 | O-ring | 217 |
| 17 | Spacer set | 290 |
| 18 | Suction pipe | 322 |
| 19 | Lower strainer | 1162 |
| 20 | Discharge pipe joint | 204 |
>> Parts details about
1. All of the metal wet parts can are made of high chromium alloy which has superior wear and erosion resistance or grey iron which has a high rigidity.
2. As the expeller ring is assembled together with the expeller, much pressure can be reduced effectively for the impeller. Meanwhile, it can still maintain a reliable sealing performance.
3. The parts such as labyrinth, labyrinth locknut, end cover and shaft sleeve are used for bearing assembly; these parts can be changed easily and have high accuracy and longer service life.
4. Some fastening parts such as studs and bolts can be used for fixing the other parts securely. All the fastening parts can be attached easily, ensuring the safety.
5. All of the rubber parts have superior erosion resisting performance which can be used for a long life.
>> Material of
| Item | Code |
| Chrome alloy | Cr |
| Cast iron | - |
| Grey iron | HT |
| Ductile cast iron | QT |
| Staniless Steel | SS304, SS306, SS316L |
| Duplex stainless steel | CD-4MCu |
| Bronze | - |
>> Strictly material components controlling procedure about
a) Analysis before and after the stove
b) Professional mould keeping and using
c) Impeller balance testing and revising by advanced quipment
d) Delicate both in dimension and surface
>> Main parts material list about
| Metal material | Rubber Material | ||
| Item | Code | Item | Code |
| Chrome alloy | Cr | Natural rubber | Ru |
| Cast iron | - | Synthetic rubber | Ternary ethylene, Nitrile rubber, Neoprene rubber, Butyl rubber |
| Grey iron | HT | ||
| Ductile cast iron | QT | ||
| Stainless Steel | SS304, SS306, SS316L | ||
| Duplex stainless steel | CD-4MCu | ||
| Bronze | - | ||
>> Our service
1. Offer vertical slurry pump solution design as working condition,
2. Offer Installation & adjustment in working condition,
3. Accept OEM
4. Select centrifugal vertical slurry pump & related equipment,
5. Sample available.
>> Other services details about
| Service | Specification |
| 1. Pump selection | Send us the vertical slurry pump basic data (medium, head, flow rate...) |
| 2. OEM/ODM | Please show us the slurry pump drawing |
| 3. Process design | Offer process design as slurry pump working condition. |
>> Key points about
Wet pit pump do not need any Shaft seal and Shaft seal water,it is still workable without enough water.
>> Applications about
Minerals processing and Tailing delivery CIL (Carbon-In-Leaching) gold processing
Accident slurry return Coal preparation
Sand and gravel discharging Chemical processing
Effluent handing
>> Application list about
| Mill discharge | Ni acid slurry | Coarse sand | Coarse tailing |
| Phosphate matrix | Minerals concentrate | Heavy media | Sugar beet |
| Dredging | Bottom/Fly ash | Lime grinding | Oil sands |
| Mineral sands | Fine tailing | Slag granulation | |
| Coal | Flotation | Process chemical | Pulp and paper |
| FGD | Cyclone feed |
>> Designing Features about
1. Material construction optional
BP: abrasion resisting metal construction vertical slurry pump
BPR: anti-corrosive rubber construction vertical slurry pump
2. Do not need any shaft seal or sealing water. Also worked well under insufficient suction duty.
3. The type with "L" is the pump with extension shaft. It suitable to deep condition. It has guid bearing. So it more stable and used more wide. However the flushing water is necessary on the guide bearing part.
4. The agitator/Cutter is available
ΞΞΞΞΞΞ CONTACT US ΞΞΞΞΞΞ
7x24Hours Online Contact Information
Sherry Lee
Shijiazhuang An Pump Machinery Co.,Ltd
anpump.en.made-in-china.com
Tel:86-311-89940549 Fax:86-311-86271170
Tel: 0086 15233116920
Anything thing need help, please call me any time, i will try best to help you..
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover