Products

Soluble Oil Metal Working Fluid Mwf Concentration for Ferrous and Non-Ferrous Metals Cutting Oil Emulsifier Additive Package
Soluble Oil Metal Working Fluid Mwf Concentration for Ferrous and Non-Ferrous Metals Cutting Oil Emulsifier Additive Package

Soluble Oil Metal Working Fluid Mwf Concentration for Ferrous and Non-Ferrous Metals Cutting Oil Emulsifier Additive Package

China Soluble Oil Metal Working Fluid Mwf Concentration for Ferrous and Non-Ferrous Metals Cutting Oil Emulsifier Additive Package, Find details about China Metal Working Fluid, Oil Emulsifier from Soluble Oil Metal Working Fluid Mwf Concentration for Ferrous and Non-Ferrous Metals Cutting Oil Emulsifier Additive Package

Model NO.
T890
Production
Synthetic
Trademark
Chorus
Transport Package
Drum, IBC-Tank, ISO-Tank
Specification
T890
Origin
China
HS Code
3811
Model NO.
T890
Production
Synthetic
Trademark
Chorus
Transport Package
Drum, IBC-Tank, ISO-Tank
Specification
T890
Origin
China
HS Code
3811
Product Introduction
Cutting Oil Emulsifier Additive Package is a high performance additive package, it is formulated with the component with the performance of lubricity, anti-rust, emulsion, ect., which is suitable for paraffin base oil and naphthenic base oil.

Features
The emulsifier oil prepared by this additive package is suitable for various ferrous metals and non-ferrous metals with long life.
It is good compatibility, the blended original fluid is stable and has no layer separation, the recommend treat rate is 20%.
Soluble Oil Metal Working Fluid Mwf Concentration for Ferrous and Non-Ferrous Metals Cutting Oil Emulsifier Additive Package

Physical/Chemical Data
The following performance data is tested by the formulation: blended by the 20% additive package + 80% naphthenic base oil, and diluted to 5% concentration by tap water.
ItemTechnical SpecificationsTest Method
AppearanceAmber Transparent LiquidBy Visual
Dilution AppearanceCream White LiquidBy Visual
Anti-rust PerformanceQualifiedStrip (24 hours)
PH Value (Tap Water 5%)8.5-9.3PH Meter
Refraction Coefficient1Enoscope
Aanti-foam Performance0ml/10minml/min

Recommend Formulation
20% Cutting Oil Emulsifier Additive Package + 80% naphthenic base oil, then add oleinic acid about 3-5% (blend to get clear emulsion).

Package, Storage and Transportation
The product is packed in 200KGS/drum or made to order, suitable for all means of transport. And it shall be stored in dry, cleaning, and ventilated warehouse.
Soluble Oil Metal Working Fluid Mwf Concentration for Ferrous and Non-Ferrous Metals Cutting Oil Emulsifier Additive Package
 

You Might Also Like