China Supplier 1.5-3.5t Foam Rubber Clamp Forklift Truck with Japan Isuzu C240 Motor, Find details about China Forklift, Diesel Forklift from China Supplier 1.5-3.5t Foam Rubber Clamp Forklift Truck with Japan Isuzu C240 Motor
Main features:
1. A reliable mast
The impact and vibration of mast are reduced significantly by using buffer device. Through finite element analysis plus optimizing the structural parameters, the vibration acceleration is reduced by 40%.
2. More scientific and environmental design
Equipped with high-quality engine, the emission meets the latest European EC and the EPA environmental regulation. The use of Non-asbestos insulation equipment is very effective to lower down the noise.
The innovative design and optimized configuration of the lifting system improve the operator's visibility greatly, and provide a clear and accessible focus of vision to ensure the safety & efficiency of operating.
3. More powerful
Adopt the international electric actuators and makes the truck steering more stable, and output power stronger!
1 | NOELIFT | ||||||
2 | Model | Unit | FD30/FG(L)30 | FD35/FG(L)35 | FD40/FG(L)40 | FD50 | |
3 | Power type | DIESEL | DIESEL | DIESEL | DIESEL | ||
4 | Rated capacity | kg | 3000 | 3500 | 4000 | 5000 | |
5 | Max lift height | mm | 3000 | 3000 | 3000 | 3000 | |
6 | Load centre | mm | 500 | 500 | 500 | 500 | |
7 | Mast extend height | mm | 4262 | 4262 | 4275 | 4280 | |
8 | Max lift height of fork | mm | 3000 | 3000 | 3000 | 3000 | |
9 | Mast closed height | mm | 2065 | 2180 | 2150 | 2330 | |
10 | Free lift height | mm | 160 | 170 | 150 | 150 | |
12 | Overall length (Without fork) | mm | 2682 | 2693 | 2895 | 3105 | |
13 | Overall Width | mm | 1225 | 1225 | 1410 | 1480 | |
14 | Front overhang | mm | 479 | 498 | 500 | 565 | |
15 | Rear overhang | mm | 495 | 495 | 495 | 540 | |
16 | Wheel base | mm | 1700 | 1700 | 1900 | 2000 | |
17 | The height of traction pin | mm | 310 | 310 | 330 | 350 | |
18 | Min. ground clearance | mm | 135 | 135 | 130 | 160 | |
19 | Fork Size | mm | 1070X125X45 | 1070X125X50 | 1070X130X50 | 1070X150X50 | |
20 | The distance between forks | mm | 1060/250 | 1060/250 | 1290/260 | 1370/300 | |
21 | Tread(front/rear) | mm | 1000/970 | 1000/970 | 1160/1065 | 1180/1190 | |
22 | Min. Turning Radius(outside) | mm | 2400 | 2420 | 2700 | 2780 | |
23 | Min. Turning Radius(inside) | mm | 200 | 200 | 230 | 270 | |
24 | Min. intersecting aisle | mm | 2380 | 2400 | 2685 | 3365 | |
26 | Speed | Travel (full load/no load) | km/h | 18/19 | 19/19 | 18/19 | 18/19 |
27 | Lifting(full load/no load) | mm/s | 440/480 | 330/370 | 350/380 | 400/450 | |
28 | Lowering(full load/no load) | mm/s | 450/500 | 350/400 | 350/400 | 350/400 | |
29 | Max.Grade ability(with/without full load) | % | 20/20 | 15/20 | 15/18 | 18/20 | |
30 | Total weight | kg | 4270 | 4700 | 5310 | 6400 | |
31 | Weight distribution full load(front/rear) | kg | 6543/727 | 7380/820 | 8380/930 | 9540/1360 | |
32 | Weight distribution sero load(front/rear) | kg | 1708/2560 | 1880/2820 | 2120/3190 | 2630/3770 |