Products

Dental Turbine High Speed LED Illumination Midwest Handpiece

China Dental Turbine High Speed LED Illumination Midwest Handpiece, Find details about China Dental Handpiece, High Speed Handpiece from Dental Turbine High Speed LED Illumination Midwest Handpiece

Model NO.
2302P-B2-S3L
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
High-Speed Handpiece
Noise
Less Than 70dB
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Model NO.
2302P-B2-S3L
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
High-Speed Handpiece
Noise
Less Than 70dB
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Dental Turbine High Speed LED Illumination Midwest Handpiece
2302P-B2-S3L K type push button high speed turbine
Model:2302P-M4-S3L ; 2302P-B2-S3L ;  2302P-M4-T3L ;  2302P-B2-T3L
(2302P:2302 push botton series; M4: 4 holes connector  ; B2: 2 holes connector  ;  S1:single water spray  S3L: LED triple water spray standard head   T3L:  LED triple water spray torque head )

Features:
single/tripe water spray , make the whole opration instant cooling. 
standard/torque push button head , meet different torque requirements in operations.
skid resistance  due to the stripe ergonomic design 
4 holes /2 holes which conform to ISO 13485 standard
LED illumination, 25000LUX , perfect brightness
 
Dental Turbine High Speed LED Illumination Midwest HandpieceDental Turbine High Speed LED Illumination Midwest Handpiece
Instruction:
After each treatment,Sterilizing handpiece in autoclave according to the following steps:
1.Remove the bur and brush clean handpiece, clean outside of handpiece with an alcohol solution.
2.Lubricate handpiece, each times drop two drops inside of air inlet pipe.
3.Place into autoclaving pouch and mark.
4.Autoclave the handpiece for 12 min. at 135ºC.
 

You Might Also Like