Boat Bumper Fender Panels UHMWPE Dock Bumper Sliding Pads
China Boat Bumper Fender Panels UHMWPE Dock Bumper Sliding Pads, Find details about China Marine Fender Facing Board, UHMWPE Front Panel for Marine Fender from Boat Bumper Fender Panels UHMWPE Dock Bumper Sliding Pads
Basic Info.
Model NO.
XX-012
Trademark
Xinxing
Transport Package
Pallet, by Sea
Specification
800*800*50mm, 745*745*50mm etc
Origin
Dezhou, China
HS Code
3920109090
Model NO.
XX-012
Trademark
Xinxing
Transport Package
Pallet, by Sea
Specification
800*800*50mm, 745*745*50mm etc
Origin
Dezhou, China
HS Code
3920109090
Product Desciption
Marine fender pad facing pads dock bumper panel
Introduction:
Ultra-high molecular weight polyethylene(UHMWPE) dock fender could avoid the impact damage between ships and dock. Because of the high impact resistance performance, UHMWPE dock fender instead of the traditional steel ones is widely used in ports and docks at home and abroad.
Our UHMW PE-1000 marine fenders are made from virgin uhmwpe material, which is much superior to wood and rubber in building marine constructions or coastal protective structures. UHMW PE-1000 marine fenders allow vessels to glide easily along the surface, protecting hulls and dock structures. Impervious to marine bore worms with minimum cleaning.
Feature:
1.Highest abrasion resistance of any polymer, 6 times more wear resistance than steel
2.Anti-weather & anti-aging
3.Self-lubricating and very low coefficient of friction
4.Excellent chemical & corrosion resistant; Stable chemical property and can endure the corrosion of all kind of corrosive medium and organic solvent in certain range of temperature and humidity.
5.Superior impact resistant, noise-absorption and vibration-absorption;
Low water absorption <0.01% water absorption and not affected by temperature.
6.Temperature range: -269ºC~+85ºC;
Very high resistance to cold, doesn't become fragile even under -180ºC.
7.High tensile strength
8.Non-toxic and no odor
9.UV resistance and long service life
10.Good performance in resisting environment stress crack
Application:
1.Harbour instruction :
Wear pad to replace wood and rubber
protective quay wall
2.truck dock
fenders for dock plate protection
3.Piling
Fenders
Wear plate and slides
4.floating dock
wear plate where dock meets pillage
fenders
Slides
Key words:
UHMW-PE wear plastic plate polyethylene dock fender panel / high impact uhmwpe marine fender pad
Technical Data of UHMWPE sheet
Other products:
Introduction:
Ultra-high molecular weight polyethylene(UHMWPE) dock fender could avoid the impact damage between ships and dock. Because of the high impact resistance performance, UHMWPE dock fender instead of the traditional steel ones is widely used in ports and docks at home and abroad.
Our UHMW PE-1000 marine fenders are made from virgin uhmwpe material, which is much superior to wood and rubber in building marine constructions or coastal protective structures. UHMW PE-1000 marine fenders allow vessels to glide easily along the surface, protecting hulls and dock structures. Impervious to marine bore worms with minimum cleaning.
Feature:
1.Highest abrasion resistance of any polymer, 6 times more wear resistance than steel
2.Anti-weather & anti-aging
3.Self-lubricating and very low coefficient of friction
4.Excellent chemical & corrosion resistant; Stable chemical property and can endure the corrosion of all kind of corrosive medium and organic solvent in certain range of temperature and humidity.
5.Superior impact resistant, noise-absorption and vibration-absorption;
Low water absorption <0.01% water absorption and not affected by temperature.
6.Temperature range: -269ºC~+85ºC;
Very high resistance to cold, doesn't become fragile even under -180ºC.
7.High tensile strength
8.Non-toxic and no odor
9.UV resistance and long service life
10.Good performance in resisting environment stress crack
Application:
1.Harbour instruction :
Wear pad to replace wood and rubber
protective quay wall
2.truck dock
fenders for dock plate protection
3.Piling
Fenders
Wear plate and slides
4.floating dock
wear plate where dock meets pillage
fenders
Slides
Key words:
UHMW-PE wear plastic plate polyethylene dock fender panel / high impact uhmwpe marine fender pad
Technical Data of UHMWPE sheet
| Property | Unit | Value |
| Density | g/cm3 | 0.93-0.96 |
| Average molecular weight | g/mol | 3million- 10 million |
| Tensile strength (23°C in air) | MPa | 22 |
| Breaking strength | MPa | 42 |
| Tensile strain at break | % | 600 |
| Charpy impact strength (notched) | mJ/mm2 | No break |
| Ball indentation hardness | N/mm2 | 42 |
| Shore hardness | -- | 65-70 |
| Abrasion | % | 70-80, steel = 100 |
| Static Friction Coefficient | -- | ≤0.16 |
| Kinetic Friction Coefficient | -- | ≤0.10 |
| Water Absorption | -- | NIL |
| Elongation at break at 23°C | % | ≥300 |
| Temperature Resistance | °C | -269 to +85 |
| Melt Temperature | °C | 130-140 |
Other products:
You Might Also Like
6pk783 Fan Belt Vg1500090066 Sinotruk Engine
4lz-6.0p Combine Harvesting Machine
Motorcycle Rectifier for Harley Dyna 74631-08 498263 49-8278......
Dahan Used Qtz63 ( 5613 ) Tower Crane for Rental
Flange Type Vortex Flowmeter for Measuring Water
4D Zero Gravity Full Body Electronic Massage Chair One Butto......
Various Colour and Shape Fun Board, Long Short Surfboard 10 ......
North Benz High Quality Beiben 380HP/420HP 6*4 6*6 Tractor T......
The Blanched Peanut 25/29, 29/33, 35/39
China Solar Cell Ibeacon Manufacture with Rechargeable Batte......