Products

2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Suppressors/ DC Surge Protection

China 2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Suppressors/ DC Surge Protection, Find details about China Surge Suppressor, Surge Protector Device from 2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Suppressors/ DC Surge Protection

Model NO.
SUP4-S40
Shape
Square
Material
Ceramic
Brand
Blusunsolar
Trademark
LEADER
Transport Package
Polybag + Carton
Specification
TUV and CE
Origin
China
HS Code
853690190
Model NO.
SUP4-S40
Shape
Square
Material
Ceramic
Brand
Blusunsolar
Trademark
LEADER
Transport Package
Polybag + Carton
Specification
TUV and CE
Origin
China
HS Code
853690190


 2P 500V/600V 40KA House Surge Protector Protective Low-voltage Arrester Device
This surge protector mainly used light volt power distribution system of lightning surge protection or other transient overvoltage. Products built for high voltage dc power supply overheating over-current protection function, can provide grade C for photovoltaic (pv) power system transient protection. Products using 35 mm DIN rail installation, module can change independently, easy to install and maintain, with remote communication alarm interface (dry contact), surge protector to facilitate remote monitoring.


Technical parameters

 
Nominal PV System Voltage500V1000V1200V
MCOV [UCPV]630Vdc1170Vdc1200Vdc
Max System Discharge Current (8/20 µs) [lmax]40kA40kA30kA
Voltage Protection Level [UP]≤2.5kV≤4.0kV≤4.5kV
Voltage Protection Level at 5kA [UP]≤2.0kV≤3.5kV≤4.0kV
Integrated Fuse Breaking Capacity/Interrupting Rating30kV/1000Vdc30kV/1000Vdc30kV/1200Vdc
TechnologyShort-Circuit Interruption (SCI) Overcurrent Protection
Operating Temperature Range [TU]−40ºC to +80ºC
Nominal Discharge Current (8/20 µs) [(DC+/DC−)­­> PE] [In]12.5kA
Response Time [tA]<25ns
Operating State/Fault IndicationGreen (good)/Red(replace)
Conductor Ratings and Cross­Sectional Area:Minimum60/70ºC 1.5mm²/14AWG Solid/Flexible
Maximum60/70ºC 35mm²/2AWG Stranded/25mm²/4AWG Flexible
Mounting35mm DIN Rail per EN 60715
Enclosure MaterialUL 94V0 Thermoplastic
Degree of ProtectionIP20
Capacity3 Modules, DIN 43880
Standards Information:IEC 61643­11 Type 2,IEC 61643­1 Class II
Product WarrantyFive Years**


Remote Contact Signaling
Remote Contact Signaling TypeChangeover Contact
AC Switching Capacity (Volts/Amps)250V/0.1A
DC Switching Capacity (Volts/Amps)250V/0.1A; 125V0.2A; 75V/0.5A
Conductor Ratings and Cross-Sectional Area for Remote Contact Signal Terminals60/75ºC Msx. 1.5mm²/14AWG Solid/Flexible
Ordering InformationOrder from Catalog Numbers Above

Dimensions and Main Drawings

2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Suppressors/ DC Surge Protection
2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Suppressors/ DC Surge Protection
2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Suppressors/ DC Surge Protection


 
 


 

Contact information:

Lydia Deng

Tel: +86 769-3335-6021 | Mob: + 86 132 2940 9650
 
 
 
   


 

You Might Also Like