plate heat exchanger  feature:

1.Braze welding vs expanded tube joint 

2.Metallic bonding between Micro channel tubes and fin. 

3.Off the shell high performing split a/c system was examined in ARI conditions A,B and C with two condensers: microchannel flat plate fin.

4.Condenses had the same volume, face, and air side area.

5.Microchannel condenser performed better and consequently system performed better.

6.Average increase in capacity is 4% and in COP IS 17% simuitaneously. 

7.Charge reduction is 19% for the condenser and 9% for the system.

8.The MCHX has better corrosion resistance

9.The MCHX is built to last

10.Area available for heat transfer in microchannel HX 

 If you have do not which model is suitable for you please tell me the below information .

 Then we can help you and save time for you.

 This for all most heat exchanger:

1) We can help buyers design specific products or produce products according to buyers' design 

2) We can print logo according to buyers' requirement

3) We has exported to many countries,such as Korea, USA, German, Canada etc.

4) Design term:We have professional design team.

5) Professional factory: We are manufacturer, specializing in manufacturing heat exchangers for over 10 years, competitive price with good quality.

6)Large productivity: 2000opcs per month.

7)Rapid response to your needs: We will reply within 24 hours after receiving you letter. If you have  urgent thing, welcome to call us.

8)The Most Efficient Service, Best Quality and Excellent Reputation.

Name: Alina