Refrigeration Machines Cold Room Chiller Evaporator
China Refrigeration Machines Cold Room Chiller Evaporator, Find details about China Evaporator, Air Cooler from Refrigeration Machines Cold Room Chiller Evaporator
Basic Info.
Model NO.
EST-8.2XS
Fin Spacing
4.5mm, 6mm and 9mm
OEM/ODM
Available
Power Supply
50Hz, 60Hz
Standard Casing
Galvanised Sheet and Powder Coated
Fan
Low Noise, Maintenance Free
Color
White
Coil Fin
Aluminum or Expoxy Coated
Tube Material
5/8′′ Copper
Ss Casing
Optional
Defrosting Mode 1
Electrical-Heating Defrosting
Defrosting Mode 2
Water Defrosting Optional
Use
Cold Room, Cold Storage, Freezer Room
Room Temperature
-30deg C~10deg C
Trademark
ESACIR
Transport Package
Standard Export Package
Specification
CE
Origin
Guangdong, China
HS Code
8418692090
Model NO.
EST-8.2XS
Fin Spacing
4.5mm, 6mm and 9mm
OEM/ODM
Available
Power Supply
50Hz, 60Hz
Standard Casing
Galvanised Sheet and Powder Coated
Fan
Low Noise, Maintenance Free
Color
White
Coil Fin
Aluminum or Expoxy Coated
Tube Material
5/8′′ Copper
Ss Casing
Optional
Defrosting Mode 1
Electrical-Heating Defrosting
Defrosting Mode 2
Water Defrosting Optional
Use
Cold Room, Cold Storage, Freezer Room
Room Temperature
-30deg C~10deg C
Trademark
ESACIR
Transport Package
Standard Export Package
Specification
CE
Origin
Guangdong, China
HS Code
8418692090
Product Desciption
1.Cold Room Cold storage Evaporator introduction and Technical data
Ceiling mounted typical air cooler(evaporator) which been widely used for different refrigerated room, cold room and cold storage.It is a indoor cooling equipment which need connect with outdoor freon condensing unit.
1) ESTJS: 0ºC keeping-fresh room;
2) ESTKS: -18ºC refrigerating room;
3) ESTXS:-25ºC fast refrigerating room;
2.Cold Room Cold storage Evaporator Features
1) Unit Out covering adopts high-quality steel, sprayed the surface and corrosion resistance; Good appearance;
2) Coil adopted staggered permutation, and tighted to fit with Aluminum sheet to ensure high efficiency heat exchange;
3) Stainless steel electric heating tubes are uniformly distributed in the coil pipes, good defrosting efficiency;
4) Double water disk structure, which can effectively prevent the water tray freeze;
3. Eurostars cold room condensing unit and Evaporator
A) Wall/Roof mounted monoblock condensing unit/ refrigeration unit
B) Emerson Copeland compressor condensing unit / refrigeration unit(box type structure)
C) Bitzer piston compressor condensing unit/ refrigeration unit(box type structure)
D) Bitzer piston compressor condensing unit/ refrigeration unit(open type structure)
E) Bitzer 2-stage compressor condensing unit / refrigeration unit
F) Bitzer Semi-hermetic piston compressor racks condensing unit / refrigeration unit
G) Bitzer Semi-hermetic screw compressor racks condensing unit / refrigeration unit
H) Hanbell Semi-hermetic screw compressor racks condensing unit / refrigeration unit
I) Cold room cold storage indoor evaporator
4.About US
EUROSTARS Advantages:
1)The Proof of Quality:
Now we have customers in different countries and places, such as Mexico, Australia New Zealand, Singapore,
Argentina, Middle- East, Africa…
2)The Guarantee of Quality:
Reasonable design, Professional technicians, Stable production workers, Full-scale Equipments, Strict QA & QC system…
3)Custom-made Design:
We supply our design drawing according to customer practical situation
4)Technique Support:
Walk in cold room: we supply our diagrammatic drawing, feel easier for installation; Cold storage
warehouse: We haveprofessional engineers who can go aboard to supply technology support and direction,until turn
key for our customers.
5)International Trade Operation:
We have concentrated on international trade of cold storage room line for many years, accumulated various experience from different customers of different countries. So we can update our operation in time according to our customers and new rules. It is helpful to clear custom and save cost and time for our customers.
5.FAQ
Q: What information do you need to provide in order to get a quotation?
A: Generally, for condensing unit we need to know following items:
-Cooling Capacity,
-Required cold room temperature or evaporating temperature
-Water cooling system or air cooling system.
-Compressor brand
-Electrical power supply, such as 380V-3Phase-50HZ or 440V-3Phase-60HZ
-Refrigerant, such as R22 or R404a
-It is better there are local ambient temperature datas
If can not give full answers for above items, we can via another way, such as cold room dimension, application, etc
6. Customers Visit
7. Product package and deliver
A:For cold room machine:Standard package f with plywood, the unit can be well protected, it is with pallet on the bottom for easy transportation., the unit can be well protected ,suitable for container shipment.
B:For cold room panel:Plastic film for panel, Each panel is well wrapped with plastic film respectively, the corner is protected with brown paper.
8. Installation instructions and project photo
1. The cooler can be fixed on the ceiling with 4, 8, or 10 long bolts.
2. The space between the unit and wall must be ≥400mm (see the diagram). It is necessary for air circulation and maintenance.
3. The unit must be level after being fixed.
4. A slope on the drainage pipe from the cooler to the outside is needed for the condensed Water goes to outside smoothly. A U shape is needed at the outside on the drainage pipe to keep the hot air from going inside. (See the diagram)
5. The drainage pipe inside the room need be heat insulated. The heating line is needed to prevent the condensed water from freezing in case the cold room temperature is below 0ºC.
6. The temperature sensor of the solenoid valve should be fixed on the level parts of suction pipe, keep touch well with the pipe surface. The suction pipe should be heat insulated to prevent the sensor from interfered by the room temperature.
7. The space outside the air outlet of the cooler must not be no obstacles, to prevent the air blowing be interfered.
Ceiling mounted typical air cooler(evaporator) which been widely used for different refrigerated room, cold room and cold storage.It is a indoor cooling equipment which need connect with outdoor freon condensing unit.
1) ESTJS: 0ºC keeping-fresh room;
2) ESTKS: -18ºC refrigerating room;
3) ESTXS:-25ºC fast refrigerating room;
| Model | Capacity KW | Air Flow | Air throw | Fan Dia. | Fan Qty | Fan Power | Defrosting Power(KW) | ||
| DT=7K,t0=-7ºC | |||||||||
| R22 | R404A | m3/h | m | cm | pcs | W | coil | water collector | |
| EST-2.3JS | 2.2 | 2.3 | 1500 | 9 | 31 | 1 | 90 | 1 | 0.5 |
| EST-3.7JS | 3.5 | 3.7 | 1500 | 9 | 31 | 1 | 90 | 1.5 | 0.5 |
| EST-4.9JS | 4.7 | 4.9 | 3000 | 9 | 31 | 2 | 180 | 2.7 | 0.9 |
| EST-6.3JS | 6 | 6.3 | 3000 | 9 | 31 | 2 | 180 | 3.6 | 0.9 |
| EST-9.5JS | 9 | 9.5 | 4500 | 10 | 35 | 2 | 280 | 3.6 | 1.2 |
| EST-13.1JS | 12.5 | 13.1 | 7000 | 12 | 40 | 2 | 390 | 4.8 | 1.2 |
| EST-15.2JS | 14.5 | 15.2 | 7000 | 12 | 40 | 2 | 390 | 6 | 1.2 |
| EST-17.9JS | 17 | 17.9 | 7000 | 12 | 40 | 2 | 390 | 6 | 1.2 |
| EST-26.3JS | 25 | 26.3 | 12000 | 15 | 50 | 2 | 1000 | 10 | 4 |
| EST-30.5JS | 29 | 30.5 | 13500 | 14 | 45 | 3 | 840 | 10 | 4 |
| EST-38.3JS | 36.5 | 38.3 | 18000 | 15 | 50 | 3 | 1500 | 10 | 4 |
| EST-44.1JS | 42 | 44.1 | 18000 | 15 | 50 | 3 | 1500 | 12 | 4 |
| EST-51.5JS | 49 | 51.5 | 18000 | 15 | 50 | 3 | 1500 | 12 | 4 |
| EST-62JS | 59 | 62 | 24000 | 15 | 50 | 4 | 2000 | 15.6 | 5.2 |
| EST-73.5JS | 70 | 73.5 | 30000 | 18 | 55 | 4 | 3000 | 15.6 | 5.2 |
| EST-88.2JS | 84 | 88.2 | 30000 | 18 | 55 | 4 | 3000 | 23.4 | 5.2 |
| EST-108.2JS | 103 | 108.2 | 42000 | 18 | 60 | 4 | 3400 | 26 | 5.2 |
| EST-117.6JS | 112 | 117.6 | 46000 | 18 | 63 | 4 | 3520 | 31.2 | 5.2 |
| EST-128.1JS | 122 | 128.1 | 46000 | 20 | 63 | 4 | 3520 | 33.8 | 5.2 |
| Model | Capacity KW | Air Flow | Air throw | Fan Dia. | Fan Qty | Fan Power | Defrosting Power(KW) | ||
| DT=7K,t0=-25ºC | |||||||||
| R22 | R404A | m3/h | m | cm | pcs | W | coil | water collector | |
| EST-1.5KS | 1.4 | 1.5 | 1500 | 9 | 31 | 1 | 90 | 1 | 0.5 |
| EST-2.4KS | 2.3 | 2.4 | 1500 | 9 | 31 | 1 | 90 | 1.5 | 0.5 |
| EST-3.2KS | 3 | 3.2 | 3000 | 9 | 31 | 2 | 180 | 2.7 | 0.9 |
| EST-4.7KS | 4.5 | 4.7 | 3000 | 9 | 31 | 2 | 180 | 3.6 | 0.9 |
| EST-6.3KS | 6 | 6.3 | 4500 | 10 | 35 | 2 | 280 | 3.6 | 1.2 |
| EST-7.9KS | 7.5 | 7.9 | 7000 | 12 | 40 | 2 | 390 | 4.8 | 1.2 |
| EST-9.5KS | 9 | 9.5 | 7000 | 12 | 40 | 2 | 390 | 6 | 1.2 |
| EST-11.6KS | 11 | 11.6 | 7000 | 12 | 40 | 2 | 390 | 6 | 1.2 |
| EST-16.3KS | 15.5 | 16.3 | 12000 | 15 | 50 | 2 | 1000 | 10 | 4 |
| EST-20KS | 19 | 20 | 13500 | 14 | 45 | 3 | 840 | 10 | 4 |
| EST-25.2KS | 24 | 25.2 | 18000 | 15 | 50 | 3 | 1500 | 10 | 4 |
| EST-30.5KS | 29 | 30.5 | 18000 | 15 | 50 | 3 | 1500 | 12 | 4 |
| EST-33.6KS | 32 | 33.6 | 18000 | 15 | 50 | 3 | 1500 | 12 | 4 |
| EST-39.9KS | 38 | 39.9 | 24000 | 15 | 50 | 4 | 2000 | 15.6 | 5.2 |
| EST-49.4KS | 47 | 49.4 | 30000 | 18 | 55 | 4 | 3000 | 15.6 | 5.2 |
| EST-60.9KS | 58 | 60.9 | 30000 | 18 | 55 | 4 | 3000 | 23.4 | 5.2 |
| EST-75.6KS | 72 | 75.6 | 42000 | 18 | 60 | 4 | 3400 | 26 | 5.2 |
| EST-83KS | 79 | 83 | 46000 | 18 | 63 | 4 | 3520 | 31.2 | 5.2 |
| EST-92.4KS | 88 | 92.4 | 46000 | 20 | 63 | 4 | 3520 | 33.8 | 5.2 |
| Model | Capacity KW | Air Flow | Air throw | Fan Dia. | Fan Qty | Fan Power | Defrosting Power(KW) | ||
| DT=7K,t0=-32ºC | |||||||||
| R22 | R404A | m3/h | m | cm | pcs | W | coil | water collector | |
| EST-1.8XS | 1.7 | 1.8 | 1500 | 9 | 31 | 1 | 90 | 1.5 | 0.5 |
| EST-2.3XS | 2.2 | 2.3 | 3000 | 9 | 31 | 2 | 180 | 2.7 | 0.9 |
| EST-2.8XS | 2.7 | 2.8 | 3000 | 9 | 31 | 2 | 180 | 3.6 | 0.9 |
| EST-4.4XS | 4.2 | 4.4 | 4500 | 10 | 35 | 2 | 280 | 3.6 | 1.2 |
| EST-5.9XS | 5.6 | 5.9 | 7000 | 12 | 40 | 2 | 390 | 4.8 | 1.2 |
| EST-7.1XS | 6.8 | 7.1 | 7000 | 12 | 40 | 2 | 390 | 6 | 1.2 |
| EST-8.2XS | 7.8 | 8.2 | 7000 | 12 | 40 | 2 | 390 | 6 | 1.2 |
| EST-12.1XS | 11.5 | 12.1 | 12000 | 15 | 50 | 2 | 1000 | 10 | 4 |
| EST-14.7XS | 14 | 14.7 | 13500 | 14 | 45 | 3 | 840 | 10 | 4 |
| EST-17.9XS | 17 | 17.9 | 18000 | 15 | 50 | 3 | 1500 | 10 | 4 |
| EST-21XS | 20 | 21 | 18000 | 15 | 50 | 3 | 1500 | 12 | 4 |
| EST-24.2XS | 23 | 24.2 | 18000 | 15 | 50 | 3 | 1500 | 12 | 4 |
| EST-27.3XS | 26 | 27.3 | 24000 | 15 | 50 | 4 | 2000 | 15.6 | 5.2 |
| EST-32.6XS | 31 | 32.6 | 30000 | 18 | 55 | 4 | 3000 | 15.6 | 5.2 |
| EST-42XS | 40 | 42 | 30000 | 18 | 55 | 4 | 3000 | 23.4 | 5.2 |
| EST-51.5XS | 49 | 51.5 | 42000 | 18 | 60 | 4 | 3400 | 26 | 5.2 |
| EST-56XS | 53.6 | 56 | 46000 | 18 | 63 | 4 | 3520 | 31.2 | 5.2 |
| EST-61XS | 58 | 61 | 46000 | 20 | 63 | 4 | 3520 | 33.8 | 5.2 |
2.Cold Room Cold storage Evaporator Features
1) Unit Out covering adopts high-quality steel, sprayed the surface and corrosion resistance; Good appearance;
2) Coil adopted staggered permutation, and tighted to fit with Aluminum sheet to ensure high efficiency heat exchange;
3) Stainless steel electric heating tubes are uniformly distributed in the coil pipes, good defrosting efficiency;
4) Double water disk structure, which can effectively prevent the water tray freeze;
3. Eurostars cold room condensing unit and Evaporator
A) Wall/Roof mounted monoblock condensing unit/ refrigeration unit
B) Emerson Copeland compressor condensing unit / refrigeration unit(box type structure)
C) Bitzer piston compressor condensing unit/ refrigeration unit(box type structure)
D) Bitzer piston compressor condensing unit/ refrigeration unit(open type structure)
E) Bitzer 2-stage compressor condensing unit / refrigeration unit
F) Bitzer Semi-hermetic piston compressor racks condensing unit / refrigeration unit
G) Bitzer Semi-hermetic screw compressor racks condensing unit / refrigeration unit
H) Hanbell Semi-hermetic screw compressor racks condensing unit / refrigeration unit
I) Cold room cold storage indoor evaporator
4.About US
EUROSTARS Advantages:
1)The Proof of Quality:
Now we have customers in different countries and places, such as Mexico, Australia New Zealand, Singapore,
Argentina, Middle- East, Africa…
2)The Guarantee of Quality:
Reasonable design, Professional technicians, Stable production workers, Full-scale Equipments, Strict QA & QC system…
3)Custom-made Design:
We supply our design drawing according to customer practical situation
4)Technique Support:
Walk in cold room: we supply our diagrammatic drawing, feel easier for installation; Cold storage
warehouse: We haveprofessional engineers who can go aboard to supply technology support and direction,until turn
key for our customers.
5)International Trade Operation:
We have concentrated on international trade of cold storage room line for many years, accumulated various experience from different customers of different countries. So we can update our operation in time according to our customers and new rules. It is helpful to clear custom and save cost and time for our customers.
5.FAQ
Q: What information do you need to provide in order to get a quotation?
A: Generally, for condensing unit we need to know following items:
-Cooling Capacity,
-Required cold room temperature or evaporating temperature
-Water cooling system or air cooling system.
-Compressor brand
-Electrical power supply, such as 380V-3Phase-50HZ or 440V-3Phase-60HZ
-Refrigerant, such as R22 or R404a
-It is better there are local ambient temperature datas
If can not give full answers for above items, we can via another way, such as cold room dimension, application, etc
6. Customers Visit
7. Product package and deliver
A:For cold room machine:Standard package f with plywood, the unit can be well protected, it is with pallet on the bottom for easy transportation., the unit can be well protected ,suitable for container shipment.
B:For cold room panel:Plastic film for panel, Each panel is well wrapped with plastic film respectively, the corner is protected with brown paper.
8. Installation instructions and project photo
1. The cooler can be fixed on the ceiling with 4, 8, or 10 long bolts.
2. The space between the unit and wall must be ≥400mm (see the diagram). It is necessary for air circulation and maintenance.
3. The unit must be level after being fixed.
4. A slope on the drainage pipe from the cooler to the outside is needed for the condensed Water goes to outside smoothly. A U shape is needed at the outside on the drainage pipe to keep the hot air from going inside. (See the diagram)
5. The drainage pipe inside the room need be heat insulated. The heating line is needed to prevent the condensed water from freezing in case the cold room temperature is below 0ºC.
6. The temperature sensor of the solenoid valve should be fixed on the level parts of suction pipe, keep touch well with the pipe surface. The suction pipe should be heat insulated to prevent the sensor from interfered by the room temperature.
7. The space outside the air outlet of the cooler must not be no obstacles, to prevent the air blowing be interfered.
You Might Also Like
ASTM F3125/A325tc Round Head Bolts with 2h Nut and F436 Wash......
OEM/ODM Low MOQ Private Label Natural Organic Skin Lightenin......
Full Automatic Qt4-18 Hydraulic Brick Machine Construction M......
Car Accessory Auto Body Part Front Bumper for D-Max 2006 200......
Milking Parlor Machine for Sale 18 Seats for 100 Cows
Pet Bottle Orange Juice Making Machine/ Bottle Orange Water ......
Wangtong High Security Zinc Alloy Tun Knob Lock Cylinder
Medical Equipment Clinical Infrared Electronic Digital Therm......
PE Synthetic Resin Calcium Oxide Cao Desiccant Masterbatch f......
A1 Energy Star 1150lm R30/PAR30 Bulb/Lamp/Light
Chinese Supplier CNC Machining Part 3ply Earloop Medical Mas......