Alloy 347/ 347H Heat Resistant Stainless Steel Plate

China Alloy 347/347H Heat Resistant Stainless Steel Plate, Find details about China 1.4550, X6crninb18-10 from Alloy 347/347H Heat Resistant Stainless Steel Plate

Basic Info.

Model NO.

347

Special Use

Cutting Tools, Measuring Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel

Ts (MPa)

>520

Elongation Stress (MPa)

205

Elongation

Eduction of Area

Melting Point

1150

Certificate

SGS ISO

Delivery Time

Within 15working Days

Trademark

Taixie

Transport Package

Woven Bag, Wooden Box

Specification

from 5mm--100mm

Origin

Wuxi, Jiangsu

HS Code

72222000

Model NO.

347

Special Use

Cutting Tools, Measuring Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel

Ts (MPa)

>520

Elongation Stress (MPa)

205

Elongation

Eduction of Area

Melting Point

1150

Certificate

SGS ISO

Delivery Time

Within 15working Days

Trademark

Taixie

Transport Package

Woven Bag, Wooden Box

Specification

from 5mm--100mm

Origin

Wuxi, Jiangsu

HS Code

72222000

Product Desciption

EN 1.4550 - 347 is a high alloy austenitic stainless steel with low carbon content. The grade is intended for use under severe corrosive conditions. The steel grade was originally developed to resist corrosion in dilute sulphuric acid. EN 1.4550 is fully austenitic, and is less sensitive to precipitation of ferrite and sigma phase than conventional austenitic grades with high molybdenum content. Due to the combination of relatively high contents of chromium, nickel, molybdenum and copper, EN 1.4550 has good resistance to general corrosion, particulary in dilute sulphuric acid. It is non-magnetic in the annealed condition but may become slightly magnetic as a result of cold-working or welding.
Design features
⇒ Good resistance to uniform corrosion
⇒ Good resistance to pitting and crevice corrosion
⇒ Very good resistance to stress corrosion cracking
⇒ Good resistance to intercrystalline corrosion
⇒ Good formability and weldability
Corrosion resistance
Uniform corrosion Uniform corrosion is characterized by a uniform corrosion of the steel surface in contact with the corrosive medium. Resistance is normally considered good if the corrosion rate is less than 0,1 mm/year. As a result of its high chromium, nickel and molybdenum contents and its alloying with copper, EN 1.4550 is passivated even in reducing environments such as dilute sulphuric acid and formic acid. Its high nickel content contributes towards its relatively low corrosion rate in the active state.
Intercrystalline corrosion
EN 1.4550 has a very low carbon content. This means that there is very little risk of carbide precipitation in connection with ordinary heat treatment and welding. The risk of intercrystalline corrosion after ordinary heat treatment and welding is thereby eliminated.
Alloy 347/347H Heat Resistant Stainless Steel Plate