Products

Jaw Crusher, Kmc140 Jaw Crusher

China Jaw Crusher, Kmc140 Jaw Crusher, Find details about China Hydraulic Jaw Crusher, C Type Jaw Crusher from Jaw Crusher, Kmc140 Jaw Crusher

Model NO.
C140
Inlet Size
1400X1070
Condition
New
Trademark
KINGLINK
Origin
China
HS Code
84742090
Model NO.
C140
Inlet Size
1400X1070
Condition
New
Trademark
KINGLINK
Origin
China
HS Code
84742090

C Jaw Crusher

PRODUCTS PROFILE


Jaw Crusher, Kmc140 Jaw Crusher
 

FEATURES AND BENEFITS

C series Jaw Crusher has adopted the most advanced crushing technology and research achievement; it is the new crushers with the advanced level, which are successfully developed by using finite element analysis method based on years' experience on jaw crusher design and manufacture.
Compare with traditional jaw crusher, it adopts high-strength material, first-class manufacturing process, and the C series Jaw Crushers provide the advantages of excellent-strength structure, reliable equipment, higher crushing ratio, bigger capacity and lower cost.

 STRUCTURE

1.Two kinds of Frames: Welding and Assembled. Usually, Small and medium sized model adopts welding, large model adopts assembled.
2.Welding frame adopts wide transitional round edge, significantly reducing the stress concentration, ensure the frame under-equal strength. It owns the features of good impact resistance and lowailure rate, bears same pressure, etc
3.Assembled frame uses advanced modulation, no-welding frame structure design, high endurance strength and reliability. The whole set assembling design is convenient for the transporting and installation especially suitable for installation of underground mine shaft, high altitude mine, as well as other narrow and difficult transporting place.
 

OPTIMIZED CAVITY DESIGN LARGE MATERIAL FEEDING SIZE

Use the symmetrical "V shape cavity design, large angle of toggle plate, large stroke, comparing with the traditional PE series jaw crusher, the C series has larger feeding particle size, higher capacity more uniform particle size, jaw plate loss reduction

LONG WORKING LIFE OF THE HEAVY-DUTY MOVABLE JAWASSEMBLY

Heavy-duty Movable Jaw Assembly adopts heavy-duty eccentric shaft,high quality heavy-load rolling bearings and finite element software optimized movable jaw plate ensuring impact resistance and high stability of moving jaw assembly; labyrinth seal and centralized lubrication system guarantee the bearing lubrication oil is not contaminated and lubrication becomes more convenient. Therefore the assembly can have a long working time and stability.

SHIELD DESIGN FOR THE MOVABLE JAW

Heavy shield is installed above the movable jaw to avoid the material impact. It can effectively protect the movable jaw and its internal bearing from damaging

OVERALL BEARING SUPPORT HOUSING

Overall cast steel bearing housing fully compatible with the frame, avoiding the combined bearing housing has a unnecessary radical load on the bearing during the fastening process, making the bearing to run more smoothly

CONVENIENT DISCHARGE SETTING ADJUSTMENT

C series Jaw Crusher adopts mechanical or hydraulic adjustment for the discharge range, compared with shim adjustment, double wedge adjustment operations is simpler, secure, fast, and saves more downtime

INTEGRATED MOTOR INSTALLATION

Integrated installation of motor seat and frame can not only save installation space, but also can prolong the service life of v-belt, due to the synchronous movement of frame, motor seat, and motor, adjustable motor seat can adjust v-belt tension

VIBRATION ABSORPTION DESIGN

Crusher fixed by rubber vibration absorption device, which can effectively absorb vibration peak, while allow the crusher to move vertically and longitudinally, thus reducing the impact on the foundation
 

PRODUCT SIZE MAP

Jaw Crusher, Kmc140 Jaw Crusher

 

PRODUCT SIZE TABLE 

 C80C100C105C110C125C140C145C160
A mm17002400205026702900306033303550
B mm12001700145020002100226024302650
C mm20202880263028303370364538554200
D mm12001725153018102090236024752540
E mm15652250192023852690289028703180
F mm160245200380450450450450
G mm6108187809501073117211401315
H mm10001400120015001600160018001800
J mm9301170120013001470164016401880
K mm117267180250280300250385
 

TECHNICAL PARAMETERS

 
 C80C100C105C110C125C140C145C160
Width of feed port8001000105011001250140014001600
Depth of feed port510760700850950107011001200
Motor power75110110160160200200250
speed350260300230220220220220
Product sizeTight side outletTon/HourTon/HourTon/HourTon/HourTon/HourTon/HourTon/HourTon/Hour
0-3020        
0-3525        
0-4530        
0-604065-85       
0-755080-95       
0-906095-125       
0-10570115-150150-210155-200190-250    
0-12080130-170170-225175-230210-275    
0-13590150-195190-245200-260235-305    
0-150100165-215215-280220-290255-330290-380   
0-185125210-275265-345280-365310-405350-455385-500400-520 
0-225150250-325315-410335-435370-480410-535455-590470-610520-675
0-260175290-380370-480390-510425-550470-610520-675540-700595-775
0-300200 420-545445-580480-625530-690590-765610-795675-880
0-340225    590-770655-850680-885750-975
0-375250    650-845725-945750-975825-1070
0-410275      820-1070900-1170
0-450300       980-1275
 
Note : the data is sampled according to on-site operation conditions .
The closed side setting is used for production according to applications and production requirements For detailed information about the applications of the crusher, please consult Kinglink. The above figures show the output and capacity of the crusher for processing medium and hard materials with bulk density of 1. 6t/m. The materials can readily enter the crushing chamber without bridging, the minimum value will be used with feeding material in case of eliminating fines(smaller than crusher setting), and maximum value will be used for feeding materials including fines. The capacity may vary depending on the feeding method and feed characteristics such as gradation, moisture, clay content bulk density and crushability.
Measurement of the jaw crusher s closed side setting varies depending on the jaw profile that is being used, which will affect the capacity of the crusher and the size of the product. The capacity and performance of the crusher can be improved by following factors:
 
1.Proper selection of the jaw plate
2.Proper feed gradation
3.Controlled feed rate
4.Enough capacity of the feeder and adequate feed width
5.Adequate crusher discharge area
6.Suitable discharging conveyor is well matched with the maximum capacity of the crusher

TECHNICAL DATA

 C80C100C105C110C125C140C145C160
Feeding portmm800*5101000*7601050*7001100*8501250*9501400*10701400*11001600*1200
Motor powerkw75110
(90)		110132
(160)		160
(132)		200
(160)		200250
(200)
speedrpm350260300230220220220220
Length of fixed jaw platemm11001600145018002000210023002500
Maintenance of maximum weight
(Movable jaw assembly without flywheel)		kg287070604020900012960159501860021380
Gross weight (excluding support)kg752020100135002506036700453005380068600


 


 

You Might Also Like