Products

Backing Steel Rubber Ceramic Lining

China Backing Steel Rubber Ceramic Lining, Find details about China Alumina Ceramic, Alumina from Backing Steel Rubber Ceramic Lining

Model NO.
rubber ceramic liner
Trademark
QIJING
Origin
Shandong
HS Code
6909120000
Model NO.
rubber ceramic liner
Trademark
QIJING
Origin
Shandong
HS Code
6909120000

    Qijing Trading Co., Ltd. main business: industrial ceramics, refractory materials, corundum wear-resistant ceramics, papermaking equipment and accessories, pulping equipment and accessories, papermaking dewatering equipment and accessories, pulping equipment and accessories, papermaking dewatering equipment and accessories, slag removal Equipment and accessories, wear-resistant pipes, mining equipment and accessories, alumina ceramic parts, thermocouple protection tubes, special-shaped fittings, pipe liner patch, pipe liner pipe, wear-resistant refractory ceramic parts, elbows, tees , Production and sales of electronic insulation materials.

 Customer first, quality first! Your satisfaction is our unremitting pursuit! As long as you request, we will complete the rest. Qi Jing Trading goes hand in hand with you to create brilliant!



Ceramic Rubber compound lining plate is compounded by high alumina ceramics and excellent natural rubber through special process. The excellent damping performance of natural rubber greatly lowers the noise generated in the transportation, which fully settled a series of issues such as impact, abrasion and noise.

Product catalogue

 Backing Steel Rubber Ceramic Lining
Backing Steel Rubber Ceramic Lining
Backing Steel Rubber Ceramic Lining
Backing Steel Rubber Ceramic Lining
Backing Steel Rubber Ceramic Lining



Qijing Ceramics can be vulcanized in rubber sheet :

  1)  Alumina ceramic plain tile
  2)  Ceramic hex tile
  3)  Square ceramic mosaic tile
  4)  Wear ceramic cylinder

Ceramic rubber wear liner with angle can be custom produced by Qijing Ceramic Company


 Abrasion resistant wear plate property :
Industry  Applied Equipment
Mining
Discharge Chute , Transfer Chute , Reflectors And Impact Plate,   

Conveyor Skirt Liners,  Stacker And Reclaimers,   
Hoppers And Silos ,

Bunker & Bin ,   Belt Stock House,   Coal Feeder,   Coal hopper,  
 
Coal fired power plant
Port Industry
Steel industry
Cement plant
Item		content
Alumina content92%
Density≥ 3.62g/cm3
Abrasion loss0.014cm3/10minutes
Rockwell A hardness≥87 HRA
Moh' s hardness9 grade
impact strength≥850 Mpa
bending strength≥ 290 Mpa
thermal conductivity20 W/m.K
thermal expansion coefficent7.2*10(-6)/m.K
water absorptionnone
surfacesmooth, clear, pure white
sizenormal size and custom-design can be supplied



Rubber details:
ItemIndex
Tensile strength>12MPA
Break extension>250%
Shore hardness55-65
Tear Stregnth<24%
Rubber and ceramic adhesion>3.0Mpa
Temperature Resistance<100
Rubber aging life>15 years
Backing Steel Rubber Ceramic Lining




  Transport and installation precautions:

Matters needing attention for transportation and installation of ceramic pipe
1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.

2. The qijing bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.

3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.

4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.

5. When using flange connection, the flange end shall be flush with the end of the composite pipe.

6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.



Package  
 
Backing Steel Rubber Ceramic Lining
 		Packaging
SizeOrder
Weight500KG-
 
 
 
Packaging Details		The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.
 
UHMWPE Paper Machine Dewatering Element Suction Box Cover/Panel/ UHMWPE Dewatering Elements
 		Packaging
SizeOrder
Weight1.2 T-
 
 
 
Packaging Details		The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.




FAQ:
Q: Are you trading company or manufacturer ?
A: We are factory.

Q: How long is your delivery time?
A: Generally it is 15 days if the mould sizes are in stock. or it is 25 days if the mould sizes are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the stock sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: For new customers, 100% T/T in advance. For  regular customers,30% T/T in advance ,balance after received the B/L copy

You Might Also Like