Products

Numa 120 Down The Hole DTH Hammer Bits for Rio Tinto Mining Drilling

China Numa 120 Down The Hole DTH Hammer Bits for Rio Tinto Mining Drilling, Find details about China Numa Hammers

Model NO.
ROS120
Model
Numa 100 DTH Hammer Bit
Type No
Down The Hole Drilling, DTH Drilling
Button Bit
Tungsten Carbide Button Bit
Machine
Down The Hole Drilling Tools
Name
Down The Hole Button Bits
Uses
Rock Drilling
Supplier
China Down-The-Hole Drill
China
China Down Hole Tools
Model No
Conventional Hammers & Bits
Tools
DTH Hammer and Bits
Trademark
ROSCHEN
Transport Package
Wooden Box
Specification
60cm
Origin
China
HS Code
84314320
Model NO.
ROS120
Model
Numa 100 DTH Hammer Bit
Type No
Down The Hole Drilling, DTH Drilling
Button Bit
Tungsten Carbide Button Bit
Machine
Down The Hole Drilling Tools
Name
Down The Hole Button Bits
Uses
Rock Drilling
Supplier
China Down-The-Hole Drill
China
China Down Hole Tools
Model No
Conventional Hammers & Bits
Tools
DTH Hammer and Bits
Trademark
ROSCHEN
Transport Package
Wooden Box
Specification
60cm
Origin
China
HS Code
84314320

DTH drill bit

Now the high pressure DTH drill bit is currently used in the face design. There are four main types: end surface convex surface, end surface planar surface, end surface concave surface and end surface deep concave center type. Carbide more choice of ball teeth, spring teeth or ball teeth and spring teeth shared tooth mode.       

Roschen has a comprehensive range of DTH drill bits to match all conceivable applications. Each bit is made from quality alloy steel, and has been precision machined to produce a perfect body, heat treated to the required hardness, given surface compression for fatigue resistance, and fitted with precision buttons manufactured in-house. These are deigned for specific applications for all rock types, hardness's and condition. Bit life and rate of penetration are the most important criteria in selecting the right bit for a particular application.

Bit Face Shape Selection:

Drop Center:
For High penetration rates in soft to medium hard and fissured rock formations. Low to medium air pressure. Maximum hole deviation control. 

Concave Face:
The all round application bit face specifically for medium hard and homogenerous rock formations. Good hole deviation control and good flushing capacity.

Convex Face:
For high penetration rates in soft to medium hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce the load and wear on the gauge buttons, but poor hole deviation control. 

Double Gauge Face:
This kind of face shape is suitable for fast penetration rates in medium to hard rock formations. Designed for high air pressures and good resistance to steel wash step gauge bit.

Flat Face:
This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash. 

Pineapple Face:
The Pineapple Bit can be dressed with ballistic buttons for use in soft to medium hard formations where fractured rock can be expected, or can be supplied with spherical buttons for hard and abrasive formations.

DTH drills are classified into high-pressure down-the-hole drills and low-pressure down-the-hole drills. At present, the polycrystalline diamond downhole drill bit is better, with high strength, high hardness, strong wear resistance, impact resistance and good self-sharpening, and its wear resistance is 5-20 times higher than that of cemented carbide. You can consider ROSCHEN Diamond DTH bit, improve work efficiency, reduce consumption, reduce the time to replace the drill and get lower drilling cost!


Product specifications:
   For 12" hammer
  DTH bits shank		Bit Dia.No
Air
Holes.		Gauge
Buttons		Front
Buttons		Weight
(Kg)		Part No.
mminch
DHD112030512"412×φ1836×φ16152DHD1120-305
31112 1/4"412×φ1836×φ16157DHD1120-311
33013"416×φ1842×φ16165DHD1120-330
35614"416×φ1948×φ16178DHD1120-356
38115"416×φ1948×φ18198DHD1120-381
SD1230512"412×φ1836×φ16156SD12-305
31112 1/4"412×φ1836×φ16168SD12-311
33013"416×φ1842×φ16180SD12-330
35614"416×φ1948×φ16191SD12-356
38115"416×φ1948×φ18200SD12-381
NUMA12030512"412×φ1836×φ16152NUMA120-305
31112 1/4"412×φ1836×φ16158NUMA120-311
33013"416×φ1842×φ16165NUMA120-330
35614"416×φ1948×φ16178NUMA120-356
38115"416×φ1948×φ18195NUMA120-381
NUMA12530512"412×φ1836×φ16170NUMA125-305
31112 1/4"412×φ1836×φ16173NUMA125-311
33013"416×φ1842×φ16182NUMA125-330
35614"416×φ1948×φ16191NUMA125-356
38115"416×φ1948×φ18200NUMA125-381


ROSCHEN hammer bit technical data:

 
ROSCHEN DTH Bits Specifications
Hammer  SizeBits diameterShankROSCHEN CODE
MetricInch
1"64mm-70mm2 1/2"-2 3/4"BR1ROS 11
2"70mm-95mm2 3/4"-3 3/4"MACH20/BR2ROS 22
3"90mm-102mm3 1/2"-4"COP32/COP34/MACH303ROS 32
M30/DHD3.5/BR3ROS 34
4"105mm-152mm4 1/8"-6"COP44/DHD340/MACH44ROS 42
SD4/M40/QL40ROS 44
5"133mm-165mm5 1/4"-6 1/2"COP54/DHD350R/MACH50ROS 52
SD5/M50/QL50/BR5ROS 54
6"152mm-254mm4 1/8"-10"COP64/DHD360/SD6ROS 62
M60/QL60/Bulroc BR6ROS 64
8"203mm-330mm8"-13"COP84/DHD380/SD8ROS 82
QL80/M80/M85ROS 84
10"254mm-380mm10"-15"SD10ROS 100
NUMA100
12"305mm-508mm12"-20"DHD1120/SD12ROS 120
NUMA120/NUMA125
Notes: 
Metzke, Remet thread is available!
Any special size of DTH bits will be available by requests.

Shank can be available:

1), Dia. 64mm-70mm shank Bulroc BR1
2), Dia. 70mm-95mm shank Halco MACH20, Bulroc BR2
3), Dia. 90mm-102mm shank COP32, COP34, Halco MACH303, M30, DHD3.5, Bulroc BR3
4), Dia. 105mm-152mm shank COP44, DHD340, Halco MACH44, SD4, M40, QL40, Bulroc BR4
5), Dia. 135mm-165mm shank COP54, DHD350R, COP54, Halco MACH50, SD5, M50, QL50, Bulroc BR5
6), Dia. 152mm-254mm shank COP64, DHD360, SD6, M60, QL60, Bulroc BR6
7), Dia. 203mm-330mm shank COP84, DHD380, SD8, QL80
8), Dia. 254mm-380mm shank SD10, Numa100
9), Dia. 305mm-508mm shank DHD1120, SD12, N120, N125
10), Dia. 405mm-864mm shank SD15, SD18
11), VKP80, VKP95, CIR90, CIR100, CIR110, CIR150, CIR200...

We can also provide related products DTH hammers, ODEX system, symmetrix systems, slide block drilling systems, etc and DTH drilling pipes for various thread API REG, API IF, BECO, etc


Product photos

Numa 120 Down The Hole DTH Hammer Bits for Rio Tinto Mining Drilling

Quality warranty:
Our products are made of high quality steel and all spares parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion.

Package:
Using ply-wooden cases and pallet for package to protect the products and avoid the damagement during transportation. Also we can customize package according to your special requests.

Production time:
Generally need 15-25 days

Transportation:
By air, By Express or By sea according to your requests.



Numa 120 Down The Hole DTH Hammer Bits for Rio Tinto Mining Drilling

 


Numa 120 Down The Hole DTH Hammer Bits for Rio Tinto Mining Drilling


FAQ 

Q: Are you a manufacturer or trading company ?
A: We are a specialized manufacturer.

Q: How about the delivery terms ?
1. Payment: T/T, L/C, Western Union, Paypal, 30% deposit in advance and rest before delivery.
2. Min. order quantity: 1 piece.
3. Transportation: By DHL/TNT/Fedex express, air, sea, train.

Q: How about discount ?
A: Price is based on products and order quantity.

Q: Do you accept sample order?
A: Yes sure, please contact us for details.

Q: How about your after-sales service?
A: As a manufacturer, we offer promt technology support for all problems and questions. Besides, we accept goods return or replace for quality problem.



For more information please contact:


 
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
 
: +86-137 6419 5009 ; +86-135 8585 5390
 
 
Website: http://roschen.en.made-in-china.com 

 ; http://roschen.en.made-in-china.com 


http://roschen.en.made-in-china.com 

 ; http://roschen.en.made-in-china.com 
 

You Might Also Like