Products

Mach132 DTH Hammer Mach120 Hammer Mach122 Hammer

China Mach132 DTH Hammer Mach120 Hammer Mach122 Hammer, Find details about China Mach 20 DTH Hammer, Mach 44 DTH Hammer from Mach132 DTH Hammer Mach120 Hammer Mach122 Hammer

Model NO.
Mach132/ Mach120/Mach122
Trademark
ROSCHEN
Specification
Mach 50/Mach 60 /Mach 80
Origin
China
HS Code
8431431000
Model NO.
Mach132/ Mach120/Mach122
Trademark
ROSCHEN
Specification
Mach 50/Mach 60 /Mach 80
Origin
China
HS Code
8431431000
 
Mach132 DTH Hammer Mach120 Hammer Mach122 Hammer

12" Mach 132
The Mach 132 hammer accepts IR DHD112 shank bits, This hammer, although capable of high pressure drilling is particularly suitable at pressure between 100-200psi(7-14bar).
The Mach 132 has a pin drive system to prevent metal to metal contact thereby minimizing spline wear and damage which can result in drill bit shank failure.

Mach 132 has a one piece top-adaptor with N.R.V(Non-return-valve) fitted for easy inspection and service, with integral finger to reduce maintenance and eliminate shimming which increases service intervals. Servicing requires only a few simple tools. Mach 132 has no liner which increases the 140kg piston blow energy and reduces parts required. This hammer is suitable for use with overburden systems.
 
Hammer Overview
Hammer TypeMach 132
Part Number600142
ShankDHD112 Pin Drive
Thread Connection6 5/8" API Reg Pin
Minimum Bit Diameter300mm
Hammer Flat SizeC Ring type
Weight615Kg(1,356lbs)
Outside Diameter273mm(10.75inch)
 Length (shoulder to shoulder)1684mm(66.3")
Minimum weight on Bit1600Kg(3520 lbs)

12" Mach 122
The Mach 122 accepts A100-15(SD12) shank bits and works over a wide pressure range with and optimum performance reached at air pressures of 200psi(14bar) and above as its higher air consumption provides increased up hole velocity, particularly when using oversized diameter drill bits.
Mach 122 has a one piece top-adaptor with N.R.V fitted for easy inspection and service, with integral finger to reduce maintenance and eliminate shimming which increases service intervals. Servicing requires only a few simple tools. Mach 122 has no liner which increases the 140kg piston blow energy and reduces parts required. This hammer is suitable for use with overburden systems.
 
Hammer Overview
Hammer TypeMach 122
Part Number600110
ShankSD12
Thread Connection6 5/8" API Reg Pin
Minimum Bit Diameter300mm
Hammer Flat SizeC Ring type
Weight614Kg(1,353lbs)
Outside Diameter273mm(10.75inch)
 Length (shoulder to shoulder)1667mm(65.6")


12" Mach 120
Mach 120 has a working pressure range of 170-350psi(12-24bar) whilst its optimum performance is reached at air pressures of 200psi(14Bar) and above.
Mach 120 has no liner which increases the 140kg piston's blow energy and reduces parts required.
 
Hammer Overview
Hammer TypeMach 120
Part Number600108
ShankSD12
Thread Connection6 5/8" API Reg Pin
Minimum Bit Diameter300mm
Hammer Flat SizeC Ring type
Weight614Kg(1,353lbs)
Outside Diameter273mm(10.75inch)
 Length (shoulder to shoulder)1667mm(65.6")
Minimum weight on Bit1600Kg(3520 lbs)
 
 
Mach132 DTH Hammer Mach120 Hammer Mach122 Hammer

 

You Might Also Like