Fiberglass sandwich mat called Flow Mat as well, made with polypropylene non-woven core and chopped strand stitched together mechanically, 2 layers of 300gsm chopped strand mat with 250g/m2 PP core, it is used for all the closed mold process needs and helps improve productivity and quality. Easy flow core for rapid wet-out and mold filling.

To reinforce polyester resin and polyurethane resin.

The weight of PP is 180GSM and 250GSM.

The application: Bus roofing, wind blade, boat, truck bodies windmill and so on.

Technical Data:
 
Properties:

No binder,no warp and weft direction corssing,no ruffled.
No displacement deformation.Good resistance to erosion,fast wet out.
Fast resin transfer speed,good manufacturability,good workability.
Good physical and chemical properties,and easy design to solution.

Picture of Product:



Packing & Storage:

Each roll covering by polyethylene plastic bag,then placed into carton and set on pallet,or set on pallet directly.
The pallet shall no be higher than 2 layers.
 
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.



Give us a chance, and we' ll return you with satisfaction.