Products

PC 5 Gallon Automatic Plastic Blowing Machine

China PC 5 Gallon Automatic Plastic Blowing Machine, Find details about China Barrel Making Machinery, Bottle Making Machinery from PC 5 Gallon Automatic Plastic Blowing Machine

Model NO.
HFB82PC
Motor
Simens Beide
PLC
Panasonic
Parison Thickness Controller
Moog 100 Points
Warranty
One Year
Trademark
KINGPLAS
Transport Package
Wooden Panel with Fumigation
Origin
Zhangjiagang City
HS Code
8477301000
Model NO.
HFB82PC
Motor
Simens Beide
PLC
Panasonic
Parison Thickness Controller
Moog 100 Points
Warranty
One Year
Trademark
KINGPLAS
Transport Package
Wooden Panel with Fumigation
Origin
Zhangjiagang City
HS Code
8477301000
Extrusion blow molding machine for 5 gallon PC barrel

Mode: HFB82PC
The blow molding machine HFB82PC is specially designed for the production of PC pure water bucket. It can also produce various hollow blow molding products made of PC such as lampshades, bottles, pots, cans, barrels etc. This machine is very suitable for PC material extrusion blow molding. The actual production speed can reach 60pcs/h (for 5 gallon pure water bottle with handle, the actual production speed is 52pcs/h).
PC 5 Gallon Automatic Plastic Blowing Machine

Basic installation including
  • Die head: special center feeding die head
  • Extrusion system: Adopt imported automatic temperature controlling device. Drive the screw with motor reducer to realize stepless regulating
  • Clamping device: Adopt bi-directional synchronous clamping device with double axis single cylinder.
  • Blowing device: with bottom blowing type
  • Hydraulic system: The whole hydraulic system adopts world-famous brand controlling components and proportional controlling circle.
  • Electric controlling system: Adopt Panasonic brand PLC. Every electric component is in famous brand.

Technical data and parts instructions of blow molding machine for series of HFBC82PC (the specification is only for your reference)
1Product max volumes20L
Extrusion system
2Diameter of screwØ82mm
3L/D25:1 (30:1, 33:1 optioanl)
4Screw rotation speed10-50 rev./min.
5Plasticizing capability60 seconds/mold
6Barrel heating zone quantity4
7Barrel heating power34KW
8Max. ejection volume1.5L
Die head system
9Max. die diameter130mm
10Die head heating zone quantity4
11Die head heating power8.7KW
Clamping system
12Mold platen dimension (W×H)740mm×520mm
13Clamping mold stroke330mm-780mm
14Clamping force200KN
Bottom blowing device
15Blow pin up and down stroke120mm
16Blow pin manual up and down stroke80mm
Robot (Take out device)
17Taking stroke1000mm
Frame
18Lifting stroke250mm
Hydraulic system
19Big pump rated pressure14Mpa
19Big pump rated flow180L/min.
20Hydraulic pump motor power12KW
Hydraulic system for parison thickness controller
21Rated pressure6Mpa
22Rated flow22L/min.
23Hydraulic pump motor power4KW
Pneumatic system
24Air pressure0.7Mpa
25Working pressure0.6Mpa
26Air consumption volume0.4 M3 / min.
Water source
27Water supply pressure0.3Mpa
Power source
28VoltageAC380V±10%
29Frequency50HZ
30Wire3 phase 4 wire
31Total rated power88.2KW
32Average consumption45KW/h
Machine basic information
33General dimension (L×W×H)5.3×2.7×4.4m
34Weight9Ton


Components
ItemTechnology content
1.Hydraulic systemOil pump:                 Double vane pump YUKEN
Hydraulic valve:            YUKEN or TAICHENG
Proportional valve:            HNC
Servo valve:                MOOG (Japan MOOG system)
Oil-way pressure control:       Proportion pressure control
Seal element:               Hansheng (Taiwan)
 
2.Electronic systemPLC:                       PANASOIC (Japan)
Contactor:                 TE (France Schneider)
Relay:                    OMRON (Japan)
Proximity switch:           Kaifang (Taiwan)
Electric ruler:                NOVOTECH (Germany)
Light curtain senor:          Sensorc
Thickness servo control:      MOOG (Japan)
Air switch:                 Meilan (France)
Touch screen:               OMRON (Japan)
3.Clamping systemForm:hydraulic clamping directly, Two-way synchronization institutions
drive form:differential motion quick Clamping, Two-rod structure g, Content model in a large space.
4.Die head systemDie structure:              Central feeding type
Runner form:              Continuous type
Material of main runner part:  38CrMoAlA;42CrMo
5.Extrution systemDrive form:               Oil motorg
Material of barrel and screw:  38CrMoAlA
Heater:                   Casting-aluminum heating device
Cooling fan:                Shanghai Huanqiu
6.Pneumatic systemMain air valve:             AIRTAC (Taiwan) / FESTO (Germany)
7.Take out deviceAir cylinder:                 FESTO (Germany)
8.MotorSiemens BEIDE motor
 



Photo
PC 5 Gallon Automatic Plastic Blowing Machine
PC 5 Gallon Automatic Plastic Blowing MachinePC 5 Gallon Automatic Plastic Blowing Machine

If you need more information of the machine, please kindly send an email to us. We aslo warmly welcome you to visit our factory. Hope to build long term business relationship with you in the near future!

You Might Also Like