Tail Reverse Light LED Bulb 1157 T20 S25 33SMD

Features

1. It can directly replace the traditional tungsten light bulb of the original car;
2. LED light emitting high purity, no lampshade filter, light wavelength error within 5nm
3. The LED is lit without delay, and the traditional tungsten bulb has a 0.3 second delay.
4.The LED consumes low power. When it reaches the same luminous brightness of a traditional lamp, the power consumption is only 6% of the traditional light bulb, and it also plays a role in saving electricity and saving fuel.
5. With long life, its non-filament structure does not heat, use under normal circumstances for up to 6 years

6. Voltage: 12V DC (that is, the output voltage of a typical car)

7. Light source: LED belongs to semiconductor solid-state light source, which is anti-vibration, waterproof and high luminous efficiency. It belongs to green light source. The European automotive industry already has mandatory standards to use LEDs as automotive light sources.

8. Energy-saving: It is 1/10 of the energy consumption of traditional halogen lamps and can better protect the car circuit.

9. Long life: up to 50,000 hours of service life. Traditional light bulbs do not exceed 2,000 hours.

Fast start: LED does not require hot start time, light response speed (nanosecond), suitable for fast moving objects.

10. Installation Notes: Press carefully when installing the lamp, do not press the lamp chip, and it is easy to damage. The original car glass lamp is very hot, please be careful when replacing it. The LED has positive and negative electrodes. If it is not bright, you can change the direction (that is, change the electrode).





 

Lightech factory is based in Guanghzou city. We spare all of our efforts on reasearch and development in automotive lightings. Our products included LED Headlights, LED Light Bars, LED Interior bulbs, LED Work lights, LED Rock Lights and HID Xenon Lights.

We spare all of our efforts on the research and development in automotive lightings. Our products win clients hearts for the low defective rate and extremely low cost. We are doing our best to make best products with best price.

Our Production capacity: HID Ballast 350.000 sets;53.000sets LED Headlights;65.000pcs LED Light Bars and LED Work Lights

Our Quality Control: 
1. For every batch of electronic materials, we will choose 30% of them for examination to see if they are in accordance to the normal standard. 
2. Every item will be subjected to an accuracy test to make sure everyone comes out at the same quality! 
3. Two times aging test, 2 hours each time. 
4. 30 minutes' flashing test before shipping.