Fruit Destoner/Fruit stone remover/Fruit core destoner

1.Application

Main purposes of application: This machine is mainly used for pitting of stone fruit such as peach and apricot at room temperature. It is one of the key equipment in the fruit pulp production line of stone fruit.

2.Main Features

       1. It can effectively separate the fruit core and pulp.;

       2. It has high efficiency, easy operation system and large processing capacity;

       3. According to the size and type of fruit, and the degree of rubber roller wear, the roller gap can be adjusted conveniently and quickly to  obtain the best pitting effect;

       4. The meat scraper and rubber roller can be replaced according to the usage conditions, and the replacement and installation are convenient.

       5.The frame adopts a frame structure welded with square tubes, angle steel and other profiles, and the overall rigidity is good.

       6. Except for feeding and discharging, the whole machine has a fully enclosed structure with good safety protection performance.

3.Components of the equipment
The rubber roller is made of high-quality food-grade natural rubber, which is wear-resistant and tear-resistant. The remaining roller shafts and bearing seats are made of SUS304 material, which is safe and hygienic. The rubber rollers are statically balanced after being manufactured to ensure stable and durable operation.The geared roller is made of SUS304 material, and spacers with the same thickness are added between the gears to ensure uniform spacing of the gear, reasonable and compact structure, light weight, and stable and reliable operation.

4.Working principles
When working, the cleaned fruit enters through the feed port, and is pressed between the geared roller and the rubber roller by the reciprocating pressure core mechanism. The two rollers rotate opposite to each other, and most of the fruit pulp is pressed into the gap of the geared roller. The core is squeezed in a rubber roller with elasticity, and the comb plate digs out the pulp from the gap between the gear discs. The core with pulp enters the core washing unit to complete the core separation.
Considering that the size of the core is different in each batch, the bearing mounting screw hole of the rubber roller is designed to be waist-shaped, and there can be a certain adjustment distance to adjust the distance between the rubber roller and the tooth roller to adapt to different batches of different sizes of cores.

Equipment photo references