China Beach and River Magnetic Iron Ilmenite Sand Separate Plant, Find details about China Magnetic Iron Sand Separate Plant, Ilmenite Sand Separate Plant from Beach and River Magnetic Iron Ilmenite Sand Separate Plant
Our factory produce full sets mining equipments for different minerals separation | ||
Coltan | Diamond | Zircon sand |
Tantalum | River sand gold | Titanium |
Cobalt | Alluvial gold | Tin /Cassiterite |
Tungsten | Rock stone gold | Heavy minerals sand |
Tantalite | placer gold | Chromium ore |
Silica sand | Gold tailing | Monazite |
Copper | Clay gold mining | Tungsten ore |
Barite | Desert sand gold | llmenite |
Chrome | Quartz | Wolfram ore |
Iron ore | Coal | Niobium |
Manganese ore | Sand gravel | Rutile |
Fluorite | Topsoil | Hematite |
Model | 5LL-1500 | 5LL-1200 | 5LL-900 | 5LL-600 | 5LL-400 | |
Outside dia(mm) | 1500 | 1200 | 900 | 600 | 400 | |
pitch(mm) | 540,720 | 900,720,540 | 675,540,405 | 450,360,270 | 240,180 | |
Pitch Dia Ratio | 0.75,0.6,0.45 | 0.75,0.6,0.45 | 0.75,0.6,0.45 | 0.75,0.6,0.45 | 0.6,0.45 | |
Lateral slope | 9° | 9° | 9° | 9° | 9° | |
Maximum starts per column | 4-2 | 4-2 | 4-2 | 3-2 | 2-1 | |
Max Feeding Size(mm) | 3 | 3 | 3 | 3 | 3 | |
Feeding Density(%) | 25-55 | 25-55 | 25-55 | 25-55 | 25-55 | |
Capacity(T/H) | 8-6 | 4-6 | 2-3 | 0.8-1.2 | 0.15-0.2 | |
External Size | Length(mm) | 1560 | 1360 | 1060 | 700 | 460 |
Width(mm) | 1560 | 1360 | 1060 | 700 | 460 | |
Height(mm) | 5230 | 5230 | 4000 | 2600 | 1500 | |
Weight (Kg) | 800 | 600 | 400 | 150 | 50 |
Jig separator belongs to gravity-based equipments, which can separate mineral based on differing of specific gravity. Saw-tooth wave jig is mainly consist of three parts: Main frame, driving set and jigging chamber. The device is suitable for sorting ferrous and nonferrous metals, chemicals, construction and metallurgical aspects of experimental research. |
Jigs a kind of energy saving gravity equipment development and improved on the basis of traditional jigs according to the the oretic layering law of jig beds. Their jigging pulsation curves take the shape of sawtooth waveform which gets the ascending water to travel more rapidly than the descending water. The ascending time is short while the descending time is long. The problem that the ascending descending water flow and action time produced by sine wave and pulsation wave are the same is solved. The looseness of bed is strengthened and suction function is alleviated so that the heavy ore grains in the minerals are able to precipitate fully and the sorting ratio ability and recovery rate of equipment are largely improved. |
Model | Chamber | Maximum Feeding size(mm) | Water added m3/t | Pressure of water Mpa | Capacity t/h | Motor power kw | Dimension mm | Weight kg | |
shape | area(m2) | ||||||||
JT0.57-1 | Ladder | 0.57 | 6 | 1-3 | >=0.5 | 1-2.5 | 1.5 | 1550x780x1530 | 610 |
JT1-1 | Ladder | 1.04 | 10 | 1-3 | 2-4 | 2.2 | 2270x1110x1890 | 900 | |
JT1.5-2 | Rect | 1.53 | 10 | 1-2 | 3-8 | 3 | 3200x1550x2050 | 1520 | |
JT2-2 | Rect | 2.28 | 10 | 1-3 | 4-8 | 3 | 3225x1550x2050 | 1640 | |
JT3-1 | Ladder | 3.3 | 10 | 1-3 | 6-10 | 5.5 | 3180x2000x2600 | 3260 | |
JT4-2 | Rect | 4.33 | 30 | 1-3 | 10-15 | 7.5 | 3600x1850x2600 | 4600 | |
JT5-2 | Ladder | 4.86 | 10 | 1-3 | 10-15 | 7.5 | 3600x2000x2600 | 4500 | |
JT1.5-2S | Rect | 1.53 | 30 | 1-3 | 3-8 | 1.5x2 | 3200x1550x2050 | 1590 | |
JT2-2S | Rect | 2.28 | 30 | 1-3 | 4-8 | 3x2 | 3225x1550x2050 | 1700 | |
JT3-2S | Rect | 3 | 30 | 1-3 | 6-15 | 5.5x2 | 3560x2030x2600 | 3260 | |
JT4-2S | Rect | 4.33 | 30 | 1-3 | 10-20 | 4x2 | 3600x1850x2600 | 4660 | |
JT5-2S | Ladder | 4.86 | 30 | 1-3 | 10-20 | 5.5x2 | 3600x2000x2600 | 4700 | |
JT6-3S | Rect | 6 | 30 | 1-3 | 15-30 | 7.5x2 | 4600x2000x2600 | 5900 |
Chamber | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
Jigging area (m3) | 9.9 | 13.2 | 16.5 | 19.8 | 23.1 | 26.4 | 29.7 | 3.3 | 36.3 | 39.6 |
Stroke (mm) | 20. 25. 30 | |||||||||
Frequency of stroke (r/min) | 50-85 | |||||||||
Feeding size (mm) | <25 | |||||||||
Make-up water (m3/t) | 1-3m3/ton of ore | |||||||||
Make-up water pressure (MPa) | ≥0.10 | |||||||||
Capacity (t/h) | 50-75 | 66-100 | 78-125 | 100-150 | 116-175 | 132-197 | 150-200 | 166-245 | 182-270 | 200-300 |
Driving motor (Kw) | 5.5 | 7.5 | 7.5 | 7.5 | 11 | 11 | 11 | 15 | 15 | 22 |
hydraulic power unit (Kw) | 0.55 | |||||||||
Weight (kg) | 6000 | 8000 | 10000 | 12500 | 14200 | 15800 | 17500 | 18000 | 19200 | 21000 |
5). Shaking Table:
Shaking table for sale is one of the main equipments of gravity concentration. Gravity Concentration Equipment is not only widely applied on separating tungsten, the tin, the tantalum niobium and other rare metals and the noble metal ore. Also widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc. The shaker effective recycling granularity scope is 2-0.037 millimeters.
Working Principle
The working principle of shaking table for sale is to use the combined action of the specific gravity difference of sorted minerals, alternating movement of bed surface, and transverse oblique water flow and riffle (or notch groove), to allow loose layering of ores on the bed surface and fan-shaped zoning. Then different products can be produced.
Features:
1.High recovery ratio;
2.Long working life due to new technology.
Model | 6s-7.6 | 6s-4.08 | 6s-1.95 | 6s-0.5 | ||||
Deck type | Coarse ore deck | Fine sand deck | Slime deck | |||||
Benefication Area(m2) | 7.6 | 7.6 | 7.6 | 4.08 | 1.95 | 0.5 | ||
Deck size | Length(mm) | 4450 | 4450 | 4450 | 3000 | 2100 | 1100 | |
Transmission end width (mm) | 1855 | 1855 | 1855 | 1320 | 1050 | 500 | ||
Concentrate end width (mm) | 1546 | 1546 | 1546 | 110 | 850 | 430 | ||
Maximum feeding size(mm) | 2 | 0.5 | 0.15 | Sand -2 Slime-0.1 | Sand -2 Slime-0.074 | Sand -2 Slime-0.074 | ||
Feeding amount | 0.8-1.5ton/h | 0.8-1.5ton/h | 0.8-1.5ton/h | 0.4-1.5t/h | 0.3-0.8t/h | 0.05-0.2t/h | ||
Feeding density(%) | 25-30 | 20-25 | 15-25 | 10-30 | ||||
Stroke(mm) | 16-22 | 11-16 | 8-16 | 6-30 | 12-28 | 9-17 | ||
Frequency(F) | 45-220 | 53-250 | 60-280 | 210-320 | 250-450 | 280-460 | ||
Water added | 1-3t/h | 1-3t/h | 1-3t/h | 0.4-2t/h | 0.2-1t/h | 0.1-0.5t/h | ||
Transverse slope of deck | 2°30-4°30 | 1°30-3°30 | 1°-2° | 0-10° | 0-8° | 0-10° | ||
Longitudinal slope of deck | 1.4 | 0.92 | --- | --- | --- | --- | ||
Cross-section shape of deck | rectangular | saw-tooth | triangle | --- | --- | --- | ||
Motor power(kw) | 1.1 | 0.55 | ||||||
Transmission mechanism | Eccentric linkage |
Model | GELIN-ES1 | GELIN-ES2 | GELIN-ES3 | GELIN-ES4 | GELIN-ES5 | GELIN-ES6 | GELIN-ES7 | GELIN-ES8 |
Rollers qt | 2pcs | 2pcs | 2pcs | 2pcs | 2pcs | 4pcs | 4pcs | 4pcs |
Roller speed | 0-800r/min | 0-800r/min | 0-800r/min | 0-800r/min | 0-500r/min | 0-500r/min | 0-500r/min | 0-500r/min |
Working voltage | 0-45kv | 0-45kv | 0-45kv | 0-45kv | 0-45kv | 0-60kv | 0-60kv | 0-60kv |
Feed size | 0-2mm | 0-2mm | 0-2mm | 0-2mm | 0-2mm | 0-2mm | 0-2mm | 0-2mm |
Capacity | 0.3-1t/h | 0.5-2t/h | 1-2.5t/h | 1-3t/h | 2-3t/h | 1-4t/h | 2-5t/h | 4-8t/h |
Our company & Customers Visiting
Ganzhou Gelin Mining Machinery Co., Ltd is an expert manufacturer of mining machines in China. Our company is located in Guzhang Industrial Zone, Shicheng county, Jiangxi province, covering an area of over 30000 square meters, having more than 30 sets of heavy processing equipment and with an annual outpurt of more than 2000 sets of mining machinery.
--- PRE-SALE SERVICE ---
1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.
--- AFTER-SALE SERVICE ---
1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term
--- ONE STOP SOLUTION ---
1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
FAQ
A:1). What type is the mining? Is it rock stone? or it is sand?
2). If rock stone,What is the general particle size(mm) of the raw ore?
3). What is the handling capacity(tons per hour) you plan to work with?
4).What is the elements of the raw ore? How much percent % of each minerals?
A: Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.
A: The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
A: Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.
Welcome to visit our factory in your free time!