Brittle Materials Crusher-Ring Hammer Crusher:
1.Product description
 
Ring hammer crusher  is suitable for mid-hard and light erosive materials, whose pressure resistance strength is no more than 100Mpa and humidity lower than 15%, such as coal, salt, chalk, gypsum, blocks, limestone, etc.
 
2.Ring hammer crusher working principle:
The main working part of  ring hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.

3.Ring hammer crusher Features:
 
1. Innovative structure seamless connection ;
 
2.Engineers on-site installation, commissioning, debugging and training ;
 
3.It is widely used in water and electricity, expressway, sand and stone, crushing fields ;
 
4.High quality chrome hammer, abrasion resistance achieving the advanced level in country ;
 
5. High security, design the row in strong metal security agencies under the counter can  be back plate and crushing plate ;
 
6.It can crush the wet stone, that is to say, you can wet the stone when crushing it to  reduce the dust pollution, and keep the workers health and the good environment .

4.Ring hammer crusher technical parameters:

Contact:
Ms Sara Pang
Mobile phone: 0086137 8347 1727