50ml Centrifuge Tubes Rnase&Dnase Free Plastic Disposable
China 50ml Centrifuge Tubes Rnase&Dnase Free Plastic Disposable, Find details about China 50ml, Plug Seal from 50ml Centrifuge Tubes Rnase&Dnase Free Plastic Disposable
Basic Info.
Model NO.
15ml 50ml
Working Temperature
-20-121c
Sealing Test
Iata Safety Standards
Package
Rack or Bulk
Trademark
BIOLOGIX
Transport Package
500 /Case
Specification
25 /Bag, 20 Bags /Case
Origin
Changzhou City, Jiangsu Province, China
Model NO.
15ml 50ml
Working Temperature
-20-121c
Sealing Test
Iata Safety Standards
Package
Rack or Bulk
Trademark
BIOLOGIX
Transport Package
500 /Case
Specification
25 /Bag, 20 Bags /Case
Origin
Changzhou City, Jiangsu Province, China
Product Desciption
Gamma sterile 15ml 50ml centrifuge tubes RNase&DNase free plastic disposable
Features
1.Tubes: made of strong, highly transparent medical grade polypropylene
2. Flat-top caps: made of medical grade polyethylene
3.Plug-seal screw on caps: made of medical grade polypropylene
4.15ml and 50ml conical tubes available;
5.Large white writing area for easy marking
6.Double threaded design reduces cross-threading; caps are easily opened
and closed
7.Flat-top caps can be written on
8.Gamma radiation sterilized, non-pyrogenic, RNase&DNase free
9.Available in racked package (sterile) or bulk package (sterile & non-sterile )
Specifications
1.Working temperature: stable from -20°C to 121°C (except flat-top cap)
2.15ml and 50ml tubes can withstand centrifugation of 8,400 and 9,400
RCF respectively
3.Sealing test: complies with the International Air Transport Association
(IATA) Safety Standards
1. What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3. What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.
Features
1.Tubes: made of strong, highly transparent medical grade polypropylene
2. Flat-top caps: made of medical grade polyethylene
3.Plug-seal screw on caps: made of medical grade polypropylene
4.15ml and 50ml conical tubes available;
5.Large white writing area for easy marking
6.Double threaded design reduces cross-threading; caps are easily opened
and closed
7.Flat-top caps can be written on
8.Gamma radiation sterilized, non-pyrogenic, RNase&DNase free
9.Available in racked package (sterile) or bulk package (sterile & non-sterile )
Specifications
1.Working temperature: stable from -20°C to 121°C (except flat-top cap)
2.15ml and 50ml tubes can withstand centrifugation of 8,400 and 9,400
RCF respectively
3.Sealing test: complies with the International Air Transport Association
(IATA) Safety Standards
1. What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
3. What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.
You Might Also Like
Handwork Polyurea Protective Material Th -701
Gasoline Hand Held Concrete Finishing Machine Mini Power Tro......
10A An87330 Three Phase Power Analyzer
3.5" eSATA HDD External Enclosure
Food Grade 304 Stainless Steel Vacuum Flask Thermal Insulati......
CE-Approval! ! ! China DT638B Hades Down Type Dental Chair
Chinese Supplier 10dt Medium Copper Wire Drawing Equipment w......
Proximal Humeral Locking Plate, Small Fragment Plates, Titan......
Industrial Parts Usi Type Seal for Piston and Piston Rod
Long Life Miniature Micro Switch Used in Phone and Designs
N210106267AA Cover