Installing structure of the unitTTC400A cable tool setter unit is a product specially developed by our company for replacing some vulnerable tool setting units that is part of the swing-arm for setting the cutting tool in the CNC lathes; The structure and size of the installing parts are exactly the same as the replacement, and the output signal is exactly the same.
Technical Parameters:The diameter of the four ceramic touching pillar( for cutting tool touching): 5.0 mm; the pillars' hardness : HM8.5;
Sensing direction of the pillars: ±X, ±Z;
The pillars sensing over-travel : X-Z±5 mm;
The trigger repeatability of the pillar(2σ): ≤ 2 μm;
Input voltage is 24±10% V DC and output load current is 50 mA;
Signal model and LED instruction: high electric level output with normal signal state, LED normally on; When any one pillar is triggered, the signal output point is suspended and the LED is off;
Seal grade: IP68.
Technical Characteristics:As shown in the picture, the installing structure and size of the tool setter unit are exactly the same as the replacement;
Tool setter unit transmits tool setting signal through cable;
It is ensured during manufacturing that the position relationship between four pillars of the tool setter unit and mounting base;
One LED indicator light is used to display the tool setter's working state.
Application:Set parameters of cutting tools automatically before CNC processing;
Detect wear and breakage of cutting tools automatically between two processes or after the CNC processing;
Through checking cutting tool parameters to control the change of machining precision from the temperature change of the machine;
Applicable equipments: various specifications of CNC lathe, turning machine center and CNC milling -turning center;
The cable: TTC400A tool setter unit is equipped a 6 meter-long, three-core, anti-oil shielded cable.