FRP Fiberglass micro-mesh molded grating 

Brief Introduction of FRP grating

Fiberglass Reinforced Plastic (FRP) is a plank shaped material cured in the matrix of unsaturated resins including isophthalic, orthophthalic, vinyl ester and phenolic, with reinforced frame of fiberglass roving through a special production process, with a certain rate of open meshes.


Properties of Powergrate FRP Molded Gratings:

1. Corrosion and chemical resistance
Corrosion is a major problem for metal or wooden grating, stair treads and other products in many different industries such as chemical plants, food and beverage factories, water and wastewater facilities, power facilities. PowerGrate is particularly designed to provide safe, long-lasting, economical and worry-free solutions in environments where chemicals and other corrosive materials attack and destroy metal or wood. According to different environmental requirements, such resins as orthophthalic polyester, isophthalic polyester, vinyl ester or phenolic are chosen as matrix material.

2. High strength-to-weight ratio
Josson manufactured as a composite of continuous fiberglass strands and h
quality resin is integrally constructed for strength, but it is less than one-half the weight of steel grating allowing easy removal for access below floor level and installation with no heavy equipment and less manpower. Properly installed, Josson gratings meet specified load requirements for steel and are more impact resistant than metal.

3. Impact resistance
The impact resistance of Josson grating allows repeated deflection without permanent d
memory, so once the object is removed, the fiberglass grating will fully recover to its original position.

4. Fire retardant
Fiberglass grating has flame spread rating of 25 or less depending on different resin systems as tested in term of ASTM E-84. Test Report can be offered upon request. Special fire retardant requirements can also be met by adding extra additives.

5. Ergonomic
Employees are experiencing fatigue after standing on solid concrete or heavy non-adjustable galvanized steel platforms all day, fiberglass gratings are the best solutions to ease the strain on the backs, feet and legs of workers increasing workers' comfort and productivity due to its natural slight resiliency that makes them comfortable to stand on for a long period.

6. Slip-resistant
PowerGrate grating has a concave top surface for slip resistance after it is extracted from the mold. Should a grit surface be specified, the grit would be either bonded to the top of the completed grating as a secondary operation or embedded to the top of grating before heating, both providing superior slip resistance. Diamond cover top or gritted cover top are also available upon request.

7. Life span
More than 20 years of Life is guaranteed for PowerGrate gratings.

8. Low maintenance
Install it and forget about it. PowerGrate is easy to clean, its open meshes permitting debris to fall through grating panel and preventing hazardous buildup on walking surface.

9. Safety
NON-CONDUCTIVE property makes PowerGrate grating ideally suitable in electrically hazardous locations acting as an insulator.
NON-MAGNETIC property allows PowerGrate grating to be used in sensitive installations where the inherent magnetic properties of metal grating will prove dangerous.

10. Comprehensive economic efficiency
The cost of PowerGrate grating is about 1.4-1.8 times that of steel grating, installation cost is about 20-40% that of steel grating, and maintenance cost is about zero. But steel gratings must be maintained every year, and the accumulated cost will be a very high sum. Therefore, the cost of PowerGrate grating is a little higher than that of steel grating, but the comprehensive economic efficiency, plus other advantages, is much higher than that of steel grating.