The automatic hydraulic oil press is a small oil press with simple operation, high oil output rate, and less replacement of wearing parts. It is advanced equipment for the manual operation of replacing small grinding sesame oil. (2-8 kg / time), short time (8 - l2 minutes / time). The
main processing oil crops of this machine are: sesame, walnut kernel, tea seed, pine seed (good peeling effect), almond, and other high oil crops.

Machine parameters

The whole machine is mainly composed of three parts:

1. Main body 2. Transmission hydraulic pressure 3. Electrical control is described

As follows:

1. Main body part: It is made up of bottom plate, column, upper slab, squeegee assembly, connection Oil pan, nut, and other parts are one of the main parts of the whole machine. The

oil is pushed in the press assembly and pushed upward by the force of the cylinder assembly. The oil flows down from the squeezed oil flow joint and passes through the oil pan. Oil storage

tank.

2. Transmission hydraulic part: This is the main working power source for the production

of a high oil rate. It is driven by transmission shaft, worm gear, worm, gear pump, high-pressure

pump, overflow valve, manual control valve, cylinder assembly, and pipe joint. And other parts.

This machine adopts an advanced hydraulic pump station-Korea three-piston pump station.

Compared with a domestic two-piston pump, it has low speed, high oil pressure and high-temperature resistance. It can work continuously without an oil cooling device above 65 degrees

oil temperature.

3. Electrical control part: This is the advanced position of this machine, it consists of motor,

voltmeter, temperature control adjustment table, pressure gauge, power insurance and other

components.