Installation procedure:
  • Check if the Flashing Road Studs charges and discharges normally 
  • Identify the place for installation 
  • Clean road surfaces 
  • Clean the bottom of the reflective Road Studs and use epoxy glue to stick it to the ground .
  • Wait 8 hours for drying before activating Road Studs
  • Caution: never installed in the central lane .

Features:
1.Exceed the certification of ASTM D4280 and BS EN1463. 
2.water,oil,chemical and heat resistant 
3.Very high reflectivity
4.Easy installation with glues
5.Photometric values:exceeds 600(mcd/lux)
6. OEM &ODM available.

Packing detail :
Carton size : 56x22.5x22.2cm
20pcs /box , 5box/ctn
40ctns /pallet
Delivery details : 
3days after payment 





K-Lite road stud 
is an extremely durable road stud meaning fewer replacement occurences, saving money and lane closures. The modular lens continues to provide delineation after impact resulting in safer driving.
All road studs are manufactured from a suitable material able to resist loads and abrasion imposed by heavy vehicles and traffic 
are integral to traffic safety at night and day time on our roads. This is especially true when conditions are wet as well as dark. In wet conditions, standard road markings can be totally obliterated by surface water In this situation, raised profile road studs are often the only remaining form of guidance for drivers.
It is therefore imperative that road studs retain a high level of long term retroreflectivity , while providing excellent adhesion to the road surface.
Key Benefits
- epoxy base providing excellent adhesion to road surface
- Injection molded from durable polymers to endure high traffic volumes
- PMMA lens providing high, long-term levels of enhanced
reflectivity  & improved durability                             
-High technology for improved reflective performance