Name | OPGW ADSS Cable Accessories Fiber Optic Cable Hardware Fittings Clamp |
Diameter | as your requirements |
Construction | as your requirements |
Length | as your requirements |
tensile strength | 1470,1570,1670,1770,1870,1960,2160N |
Surface treatment | Ungalvanized,Electro galvanized,PVC coated,etc. |
1.Cable Storage Shelf
Cable Storage Shelf is attended for coiling the surplus cable on the splicing pole.
2.Fix Clamp(GXJ)Fix Clamp is attended for installing Cable Joint Box and Cable Storage Shelf one the tower.
3.Stainless Steel Band
Stainless Steel Band is designed to install
Cable Joint Box and Cable Storage Shelf
on poles.
4.Down Lead Clamp:Down Lead Clamp is designed to lead down cables on splicing and terminal pole/tower and to fix the arch section on the middle reinforcing pole/tower. Normally, a unit of Down Lead Clamp is needed 1.5meters, and it is also used in other fixing area.
5.Preformed Suspension Clamp:
The Preformed Suspension Clamp is the connecting hardware of ADSS cable hang in transmission line pole (tower). It can reduce static stress at the support point and increase ant-vibration ability of ADSS cables, and cushioned against the dynamic stress of aeolian vibration. as well as ensure that the cable bending will not exceed the permissible values, make the cable does not produce bending stress, so that the fiber optic don't produce extra loss in the cables.
6.Structure and Raw Material:
Housing Clamp--- It is made of corrosion resistance cast aluminum alloy, which is stable, better anticorrosive in aero and mechanical performance.
Rubber Insert--- It consists of high-class rubber and center reinforcing assembly, rubber insert is with ozone resistance, chemical resistances, weather resistance performance, with high and low temperature performance, high strength and elasticity, small compression deformation.
Bolt, Flat Washer, Spring Washer, Nut, Split Lock, Shackle--- Standard Parts of Electric Power.
Inner Preformed Rods---According to the mechanical performance and chemical composition to custom-made the aluminum alloy wire, with high tensile strength, hardness strength and excellent elasticity and strong rust resistance , it can be used for a long time in the bad weather condition.
Outer Preformed Rods--- The same as the Inner Preformed Rods.
7.Fastening Clamp:
Fastening Clamp for Tower---Series of Fastening Clamps are designed to connect Tension Clamps, Suspension Clamps and towers, it is according to the tower type of hanged points and the size of main material.
Fastening Clamp for Pole---Series of Fastening Clamps for Poles are designed to connect Tension Clamps, Suspension Clamps and cement poles, it is according to the pole type of hanged points and the size of main material.Traction Clamp---Traction Clamp is specially intended for connecting the tightening wires and the cable during the installation of ADSS and OPGW Cables. The Preformed Traction Clamps can keep the cables steady without causing mechanical stress. The structure is simple and reliable. Traction Clamps can be reused no more than three times.
Darren Wuxi Metal Technology Co., Ltd is a leading manufactuer of Galvanized steel wire & Strand, Aluminum cald steel wire & strand in China. Factory is located in Wuxi where is well known for its beautiful scenery. It takes only two hours drive to Shanghai. We provide above goods used for power and communication materials.
Including products: Drop wire clamps, CATV drop wire clamp, service wedge clamp, J clamp, other fixed cable, support wire deadend, hoop fastening retractor, support wire deadend, drive ring, wrenchable P house hook, pole band, guy grip, pipe clamps, cable clamps, other product.