Dynamic Facial Recognition Check-in
China Dynamic Facial Recognition Check-in, Find details about China Face Recognition Terminal, Dynamic Facial Recognition Check-in from Dynamic Facial Recognition Check-in
Basic Info.
Model NO.
Dynamic Facial Recognition Check-in
Type
Fingerprint
Usage
Access Controller, Attendance Machine, Access Ma
Trademark
will
Transport Package
Carton
Specification
4.3inch
Origin
Ningbo
Model NO.
Dynamic Facial Recognition Check-in
Type
Fingerprint
Usage
Access Controller, Attendance Machine, Access Ma
Trademark
will
Transport Package
Carton
Specification
4.3inch
Origin
Ningbo
Product Desciption
4.3inchFacial Dynamic Recognition Terminal
User guide
Dear customers,
Thanks for using this product from our company. Before using it, please read the manual carefully, because it can improve your use efficiency. Thanks!
Using environment
1. The working temperature of the time attendance device is 0-45ºC. Please do not used in outdoors, because long time working in outdoors will have bad influence on the device. If the device must be used in outdoors, it is need to use sun shade and radiating equipment to protect it in summer, and in winter it is need to use heat preservation facilities.
2. This terminal can be installed indoor and outdoor. But direct sunlight ,strong light , backlight and side light will affect machine recognition. When the device is in a black environment, the facial light intensity at a distance of 0.5 meters from the device is about 100 Lux-300 Lux. The closer user to the terminal, the higher intensity of the face light. If the facial exposure is too high, the user's facial feature points cannot be extracted, and recognition is difficult.
3. Installation and recommendations for its use
1) Install the device in a place where the light source has less influence;
2) If you enter a face on the unit, enter it under the condition that the external light is bright and there is no direct sunlight or metering;
3) If you use a computer or other camera tools to take pictures, then send the employee photos through the software, please select a better quality photos;
4) Adjust the recognition threshold as appropriate according to the usage.
5) The actual installation height coordinates the higher-height users and lower users according to the site conditions. The height of the general camera from the ground is recommended to be between 1.4-1.5 meters;
6) If installing outdoors, consider installing a visor on the equipment. If installed indoors, the device is at least 2 meters from the light source and at least 3 meters from the window.
User guide
Dear customers,
Thanks for using this product from our company. Before using it, please read the manual carefully, because it can improve your use efficiency. Thanks!
Using environment
1. The working temperature of the time attendance device is 0-45ºC. Please do not used in outdoors, because long time working in outdoors will have bad influence on the device. If the device must be used in outdoors, it is need to use sun shade and radiating equipment to protect it in summer, and in winter it is need to use heat preservation facilities.
2. This terminal can be installed indoor and outdoor. But direct sunlight ,strong light , backlight and side light will affect machine recognition. When the device is in a black environment, the facial light intensity at a distance of 0.5 meters from the device is about 100 Lux-300 Lux. The closer user to the terminal, the higher intensity of the face light. If the facial exposure is too high, the user's facial feature points cannot be extracted, and recognition is difficult.
3. Installation and recommendations for its use
1) Install the device in a place where the light source has less influence;
2) If you enter a face on the unit, enter it under the condition that the external light is bright and there is no direct sunlight or metering;
3) If you use a computer or other camera tools to take pictures, then send the employee photos through the software, please select a better quality photos;
4) Adjust the recognition threshold as appropriate according to the usage.
5) The actual installation height coordinates the higher-height users and lower users according to the site conditions. The height of the general camera from the ground is recommended to be between 1.4-1.5 meters;
6) If installing outdoors, consider installing a visor on the equipment. If installed indoors, the device is at least 2 meters from the light source and at least 3 meters from the window.
You Might Also Like
Plastic Paving Concrete Mold DIY Walkway Stones Mould Landsc......
Baroque Freshwater Pearl Necklace fashion Jewelry Jewellery ......
China Professional Made Super Big Size Ductile Iron Flange P......
Supermarket Storage Container Plastic Folding Stackable Coll......
Plastic Disposable Hitachi Beckman Sample Cup
Bulk Pen Drive Wood USB Flash Drive
Debo 5 Years Warranty HPL Toilet Cubicle Board
Luxury Hotel 1500 Supreme Collection Bed Sheet Set
Sodium Hyaluronic Acid Gel Injection for Lip, Face, Nose, Br......
Fenugreek Seed Extract 4-Hydroxyisoleucine for Improve Insul......
Rechargeable Battery 25ah 3.2V LiFePO4 Battery Cell
Radial Truck Tyre 10.00r20 11.00r20 12.00r20, TBR