Bilgmon 488 15ppm Bilge Alarm for Ows

China Bilgmon 488 15ppm Bilge Alarm for Ows, Find details about China 15ppm Bilge Alarm, Bilge Alarm from Bilgmon 488 15ppm Bilge Alarm for Ows

Basic Info.

Model NO.

DY0101025

Alarm Volume (within 1m)

0 - 30 Ppm

Receive Frequency

Trademark

DEYUAN MARINE

Transport Package

Standard Packing

Specification

488

Origin

China

Model NO.

DY0101025

Alarm Volume (within 1m)

0 - 30 Ppm

Receive Frequency

Trademark

DEYUAN MARINE

Transport Package

Standard Packing

Specification

488

Origin

China

Product Desciption

Bilgmon 488 15ppm Bilge Alarm for OWS

The BilgMon488 bilge alarm has been designed specifically for use in conjunction with 15 ppm oil-water separator units. BilgMon488 performance meets the requirements of  the International Maritime Organisation specifications for 15 ppm bilge alarms contained  in
resolution MEPC. 107(49).
BilgMon488 bilge alarm is equipped with 2 adjustable alarms that are triggered when the oil-content  of the processed sample exceeds the set limit (1 - 15 ppm, works-adjusted to 15ppm). Alarm outputs consist of relays and indicator LEDs. Additionally a 0(4) - 20 mA current
output signal (corresponding to 0 - 30 ppm) is available to enable remote surveillance  and recording of oil contents.
Measurement:
Oil range: 0 - 30 ppm
Resolution: 0.1 ppm
Accuracy: According to IMO MEPC.107(49)
Response time: < 3 sec
Alarms:
Alarm 1 (valve control) delay: 0-10 sec user adjustable
Alarm 2 (annunciation) delay: 0-600 sec user adjustable
Alarm points 1 and 2: 1-15 ppm user adjustable
Alarm hysteresis: 0.5 ppm (below alarm point)
Data storage and retrieval:
Calibration storage: Stored in sensor housing.
IMO required data: Stored in BilgMon488 main housing (sensor
housing may be replaced with data
remaining on board).
IMO required data retrieval: Via LCD display, RS232 or removable
memory.
User interface:
LCD display: 2x16 alphanumeric display
Control: 4 button keypad

Bilgmon 488 15ppm Bilge Alarm for Ows