Products

550~1650mm Coil Width Push Pull Pickling Line Galvanizing Equipment

China 550~1650mm Coil Width Push Pull Pickling Line Galvanizing Equipment, Find details about China Pickling, Pickling Line from 550~1650mm Coil Width Push Pull Pickling Line Galvanizing Equipment

Model NO.
550~1500mm
Production Scope
Product Line
Trademark
Moran
Transport Package
International Package
Origin
China
Model NO.
550~1500mm
Production Scope
Product Line
Trademark
Moran
Transport Package
International Package
Origin
China
Hebei Moran Environmental Protection Technology.,Ltd is one of main metallurgical equipment factory in China. our products include new and used steel and aluminum rolling mill,2hi 4hi 6hi 8hi to 20 hi rolling mill machine, skin pass mil, tension leverler, tension leverler and skin pass mix mill, caster, steel coating line, pickling line ,annealing furnance,grinder, and other related equipment and its parts.our machine has been exported to many country and enjoy a very good reputation among our users.

for more detail pls contact us
550~1650mm Coil Width Push Pull Pickling Line Galvanizing Equipment
550~1650mm Coil Width Push Pull Pickling Line Galvanizing Equipment



For coils to be pickled:
Cold-rolled carbon structural steel, high-quality carbon structural steel and low alloy steel coils.
Steel type: Q195/235, ST12/13, SPCC, SPCD and 20#
Yield strength: 210~360N/mm 2
Tensile strength: 270~610N/mm 2
Specifications
Coil thickness:1.2~4.5mm
Coil width: 650~1650mm
Inner diameter of coils to be pickled: ф610mm
Inner diameter of coils after pickling: ф610mm
Coil outer diameter: max.ф 2100mm
Finished product width:1650mm
Coil weight: max 30t
Annual work plan: 300 days×24 hours
Energy: water, electricity and vapor
Product form: coils one after another
Production capacity: 360000Ton/year
Max. Process speed: 120m/min,
Max 200 g/L HCl, 125g/L Fe 2+ ,5 g/L Fe 3+

II.  The major technical targets
Process method: Push-pull shallow trough turbulence hydrochloric acid pickling
APU layout direction: From left to right when seating at operation out board
Max. process speed: 120m/min
Threading speed: 10~60m/min
Point move speed: 10~30m/min
Transmission way: AV driving system, speed regulated by variation
frequency
Acid concentration: Max 200 g/L HCL, 125g/L Fe 2+ ,5 g/L Fe 3+
Min. acid pickling time: 26s
Acid trough length in total: about 50m
Whole ACU length: about 120m
III.  Process Process Flow

Major equipments in turns are as follows:
Crane hoisting coils to skids →coil laoding car→ decoiler (pressure roller,
anti-curve roller) → decoiling scraper → Deflector roll → vertical
guide roller → pinch roller straightener → crop shearer →corner
shearer(with scrap bucket) → vertical guide roller → pre-washing
trough → four-grade hydrochloric acid pickling trough → four-grade
washing trough (Including pre-washing section) → edge blowing device
→ hot air dryer → II# pinch roller → looper (Both ends are equipped
with looper swing stand) → vertical guide roller → pinch centering
machine → circle shearer (With waste edge recoiler) → 3-roller
tension roller → crosscut shearer → vertical guide roller → steering
pinch roller → recoiler → coil unloading trolley → coil receiving stand
→Crane hoisting coils to storage house
IV Energy
Electricity: installed capacity: about 1500kw, 380v
Including:
Major transmission (AC frequency conversion motor) installed capacity: 900kw
Auxiliary equipments (Constant AC motor) installed capacity: 600kw
The two parties' electricity connection is separated by Party B control
cabinet inlet line switch upper port; Party B's switch is protected and will
provide relevant installed capacity. Cables and span structure except the
controlling cabinet shall be provided by Party A.
Note: Workshop public facilities electricity energy is not included.
Compressed air: 0.4~0.6Mpa, purified air: 4 Nm 3  per min
Water: Rinsing water is soft water. Consumption on average is about 5 m 3
per hour
Vapor: Providing capacity is 6.5t/h(p=0.5Mpa 151ºC saturated vapor),
actual consumption on average is about 6t/h
Waste air discharge amount: about 16000 m 3  per hour
Pollution control: Waste liquid: rinsing water: 5 m 3  per hour, including
HCL less than 10g/L
Waste air: HCL content is less than 20mg/ m 3
The whole APU length:113m
Plant width: 33m
550~1650mm Coil Width Push Pull Pickling Line Galvanizing Equipment
550~1650mm Coil Width Push Pull Pickling Line Galvanizing Equipment
550~1650mm Coil Width Push Pull Pickling Line Galvanizing Equipment
 

You Might Also Like