Cotrust Cth200 PLC H226im 14di /10do Relay Output Ethernet Port CPU

China Cotrust Cth200 PLC H226im 14di/10do Relay Output Ethernet Port CPU, Find details about China Cotrust, PLC from Cotrust Cth200 PLC H226im 14di/10do Relay Output Ethernet Port CPU

Basic Info.

Model NO.

CTH2 216-1BD46-0X24

Customized

Weight

0.5kg

Trademark

COTRUST

Transport Package

CTN

Specification

137*80*62mm

Origin

China

HS Code

85371011

Model NO.

CTH2 216-1BD46-0X24

Customized

Weight

0.5kg

Trademark

COTRUST

Transport Package

CTN

Specification

137*80*62mm

Origin

China

HS Code

85371011

Product Desciption

Order Data

Products data		Order No.
CTH200 I6 series CPU
CPU H226IM	CPU H226IM:128KB program memory+64KB Secret library+64KB Secret library,64KB data memory+100KB extension V section,24VDC power supply,14DI/10DQ relay output,2A ,2 PPI/FPORT port,1 Ethernet port.Data permanent stored.Support Analog,CAN and RS485 expansion boards,support S7 protocol.	CTH2 216-1BD46-0X24

Performance Parameters

Physical Features

Dimension(W×H×D)

137×80×62mm

Power consumption

Program memory

128K+64K+64K

Data memory

64KB+100KB,Data permanent stored

Maximum number of expansion modules

Maximum digital

128DI/128DO(expand CAN expansion board up to 640DI/640DO)

Maximum analog

32AI/32AQ(expand CAN expansion board up to 194AI/194AO)

Data stored

FlashROM Data permanent stored

Power supply features

Rated input voltage

AC220V

Impulse current

264VAC,20A

Isolation (field and logic)

1500VAC

Hold time (power off)

20ms/80ms above,120/240VAC

Sensor +24V power output

Voltage range:20.4~28.8VDC

Rated current:300mA

Maximum ripple noise (<10MHz) :<1V peak-to-peak value

Isolation (sensor and logic):None

Power alarm

when it is lower than 15V, the alarm bit SM195.1

Regular features

Total timers

512

1ms

10ms

272

100ms

236

Counters

256

Accumulators

Memory bit

256bit

Local storage(L)

64 bytes independent

Sequence control relay(S)

256 bit

Time interrupt

2*1ms resolutions

Edge breaks

Boolean operation execution time

≤0.15us

Floating operation execution time

≤6.2us

Real time clock

Built-in

BD expansion board port

One ,BD expansion board supports RS485 expansion board, CAN expansion board, and analog expansion board

System indicator

SF indicator (red)

ON:Program error,OFF:Normal

DIAG indicator (orange)

ON:Program control,OFF:Normal

RUN indicator (green)

ON:running,OFF:stopped

STOP indicator (orange)

ON:stopped,OFF:running

RMC indicator (green)

ON:remote control is connected,OFF:remote control is disconnected

LNK/ACT indicator (green)

ON:Ethernet connection,Blinking: Transmission ,OFF:disconnect

Run switch

RUN/STOP

External battery port

Special battery card

Programming card

Support

Integrated communication capabilities (PPI/ free port)

Communication interface

2 Communication port:
PORT0:PPI/free port,standard RS485
PORT1:PPI/free port,standard RS485
After the RS485 expansion board is plugged in and restarted, PORT0 (RS485, PPI communication port) PORT1 (RS485, PPI/ free port), FPORT0 (free port)

Baud rate(baud)

9.6k,19.2k and 187.5k

Free port baud rate(baud)

1.2k ~ 115.2k

Maximum number of stations

32 stations per segment, 126 stations per network

Maximum number of main stations

Point-to-point (PPI master mode)

Yes(NETR/NETW),With a maximum of 8 connections and a maximum communication of 200 bytes per connection

MPI connect

8(1PG/1OP),2 reserved

Maximum cable length per section

Use an isolated repeater

No isolated repeater is used

The baud rate is 1000 m at 187.5 K and 1200 m at 38.4 K

50m

Ethernet Communication

Communication port

1 Standard Ethernet port

Communication standards

IEEE802.3 standards

Transmission speed

10Mbps/100Mbps adaptive

Adaptive cross-connect

Support

Hardware interface

RJ45

Protocol Type

UDP/TCP protocol

Supports UDP_PPI, MODBUS_TCP, Socket, and S7 protocols, Ethernet communication between PLCS, and MiCo Ethernet programming.

Configuration mode

Ethernet port search PLC,support the mouth download system configuration.

Maximum number of connections

8 UDP/PPI connections, no master or slave

8 TCP/Modbus connections, no master or slave

4 Socket connections, 2 UDP, 2 TCP

8 S7 protocol, no master and slave, COTRUST PLC only as slave station

Maximum single data transmission

Up to 200 bytes for UDP_PPI transmission.

Up to 240 bytes are used for ModBus_TCP transmission.

Up to 512 bytes is used for Socket transmission

Up to 200 bytes for S7 transmission

Startup time of network port

5 to 10 seconds. The startup time varies depending on the network environment.

Indicator

RMC

On: The remote server is successfully connected

Off: The remote connection is disconnected or the remote function is disabled

LINK/ACT

On: The hardware of the network port is connected

Blinking: Data is being exchanged

Off: The hardware of the network port is disconnected

The length of the communication cable

100M,cable type is CAT5e or above

Isolation

Communication isolation

IP address reset function

Five consecutive times within two seconds

Upgrade Firmware function

Use MagicWorks PLC and MiCo to remotely upgrade firmware from company servers over Ethernet

I/O Features

Number of integrated digital inputs

Input type

Leak/Source

Number of integrated digital outputs

Output type

Source

Maximum digital

128DI/128DO(expand CAN expansion board up to 640DI/640DO)

Maximum analog

32AI/32AQ(expand CAN expansion board up to 194AI/194AQ)

The maximum number of local expansion IO modules

Pulse capture input

High-speed counters

Total

Uniphase counters

AB-phase counters

6
6×50KHz
4×30KHz

Integrated Communication Function (CANopen) - use for CAN communication board model CTH2-CAN-01S2-EB

Communication Interface

1(8 Pin)

Communication speed(kbps)

1000

800

500

250

150

Maximum cable length(m)

100

250

500

1000

2500

Maximum station address

127

Station address range

1-127

Maximum number of master and slave stations

Configuration method

CAN configuration blocks and EDS files

Maximum digital access

Nomal IO

CANopen IO

Byte

Memory starting address

Byte

Memory starting address

Input

IB0

Input

IB16

Output

QB0

Output

QB16

Maximum analog access

Normal IO

CANopen IO

Channel

Memory starting address

Channel

Memory starting address

Input

AIW0

Input

162

AIW64

Output

AQW0

Output

162

AQW64

Integrated Communication Function (CANFree) - Used when extending the CAN communication board

Communication Protocol

CanFree

Use method

Supported by internal library instructions

Digital input features

Number of interated digital input

Input type

Leak/source

Rated voltage

24 VDC

Maximum continuous allowable voltage

30 VDC

Logic 1 signal (min.)

18 VDC,3.0mA

Logical 0 signal (Max.)

5 VDC,1mA

Isolation (field and logic)

Isolation group

500 VAC,1min

Simultaneously connected input

Maximum cable length

500m

Shielding: 50 m (high speed counter input); Unshielded: 300 meters (standard input)

Digital Output Features

Number of integrated digital output

Output frequency (maximum)

Relays, dry contacts

Rated voltage output

24VDC or 110V/ 220VAC

Output voltage range

5-30VDC or 5-250VAC

Rated current per point

Rated current for each common point

Surge current

Lamp load (maximum)

30W DC/200W AC

On resistance (contact)

0.2Ω

Delay

100,000 times on and off

Output of simultaneously connected

Parallel output

None

Maximum cable length

Shielde

500m

Unshielded

150m

CTH2 216-2BD46-0X40 wiring diagram

Cotrust Cth200 PLC H226im 14di/10do Relay Output Ethernet Port CPU

RS485 communication port definition

Connector	PIN	PORT0(RS485)	FPORT0(RS485)
	1	Shell Grounded	Shell Grounded
	2	logically	logically
	3	RS485+signal B	RS485+signal B
	4	Send the application	Send the application
	5	+5V,Grounded	+5V,100ΩGrounded
	6	+5V 100Ω	+5V 100Ω
	7	+24V	+24V
	8	RS485-signal A	RS485-signal A
	9	NC	NC
	shell	Shell Grounded	Shell Grounded

RS485 expansion board communication interface

Module interface and connector	PIN	FPORT0(RS485)
Note:when terminal resistors are needed, short connect the 2 and 3 pins	1	RS485+signal B
	2	RS485-signalA
	3	Terminal resistance
	4	Shell Grounded
	5	RS485 signal GND
	6	NC
	7	NC
	8	NC
	9	NC

Products

Cotrust Cth200 PLC H226im 14di /10do Relay Output Ethernet Port CPU

You Might Also Like

10OZ Cotton Polyester Spandex For Jeans

Auto Wiper Motor for Renault Master, 7701050898

Indoor Commercial Trampoline Center for Shopping Mall

Neonpro Series Black White Transparent Straight Type Sleeve ......

Reliable DDP Railway Shipping From Yiwu Shenzhen to EU DDP t......

Ont T24 Plank Support Bench Press, Chest Push Bench Fitness ......

Large Capacity Fashion Stylish Gift Women Ladies Work Shoppi......

New Factory Price High Quality Pin Type Forklift Forks for S......

Natural Birch Wood Double Pointed Sticks

Prefabricated Steel Structure House Project for Logistics Ce......

OEM ODM Customized Home Workout Equipment Resistance Band fo......

Nonwoven Fabric Best Cheap Painter Absorbent Cotton Fleece