High Speed PLC Programming Logic Controller 20kb Compatible Siemens 224 CPU
China High Speed PLC Programming Logic Controller 20kb Compatible Siemens 224 CPU, Find details about China Plc, Programmable Logic Controller from High Speed PLC Programming Logic Controller 20kb Compatible Siemens 224 CPU
Basic Info.
Model NO.
UN214-1AD23-0XB8
Trademark
UniMAT
Origin
China
HS Code
853710119
Model NO.
UN214-1AD23-0XB8
Trademark
UniMAT
Origin
China
HS Code
853710119
Product Desciption
UniMAT CPU 14DI / 10DO Programming Logic Controller DC / DC /DC
1). 14DI, 10 DO with transistor ;
2). Communication Ports: 2RS - 485, both support PPI protocol ;
3). Supports expansion modules : 7 modules ;
4). Compatible with Siemens 224 CPU ;
5)). 3 year warranty ;
6). Siemens software is ok.
| Technical specifications | |
| Model | CPU224 DC/DC/DC |
| Physical characteristic | |
| Dimensions(W x H x D)(mm) | 120.5× 80× 62 |
| Power consume | 7W |
| Memory | |
| Program memory size | |
| With run mode edit | 25K bytes |
| Without run mode edit | 50K bytes |
| Data memory | 20408bytes |
| I/O | |
| Local digital inputs | 14 inputs |
| Local digital outputs | 10 outputs |
| Digital I/O image size | 256(128 inputs/128 outputs) |
| Analog I/O image size | 64(32 inputs/32 outputs) |
| expansion modules allowed (Max) | 7 modules |
| intelligent modules allowed (Max) | 7 modules |
| Pulse catch inputs | 14 |
| High-speed counters | 6 counters total |
| Single phase | 6 at 30KHz |
| Two phase | 4 at 20KHz |
| Pulse outputs | 2 at 20KHz(DC outputs only) |
| General | |
| Timer | Total number: 256(1ms: 4; 10ms: 16; 100ms: 236) |
| Counters | 256 |
| Internal memory bits stored on power down | 256 |
| Time interrupts | 2 with1ms resolution |
| Edge interrupts | 4 up and/or 4 down |
| Analog adjustment | 2 with 8 bit resolution |
| Boolean execution speed | 0.08µ s per instruction |
| Real Time Clock | Built-in |
| Communications Built-in | |
| Ports | 2 RS-485 ports, within1standard PPI port |
| PPI Baud Rates | 9.6, 19.2 and 187.5 kbaud |
| Freeport Baud Rates | 1.2kbaud to 115.2kbaud |
| Max. cable length per segment | With isolated repeater: 1000 m up to 187.5kbaud, 1200 m up to 38.4kbaud |
| Without isolated repeater: 50 m | |
| Max. number of stations | 32 per segment, 126 per network |
| Max. number of masters | 32 |
| Peer to peer(PPI Master Mode) | Yes |
| Power | |
| Input voltage | 20.4 to 28.8 V DC |
| Input current | 110mA while CPU only at 24 V DC |
| 700mA while Max. load at 24 V DC | |
| Inrush current | 12A at 28.8 V DC |
| Isolation(field to logic) | Not isolated |
| Hold up time(loss of power) | 1s at 24 V DC |
| Sensor voltage | L+ minus 5 V |
| Current limit | 1.5A peak, thermal limit non-destructive |
| Ripple noise (sensor to logic) | Derived from input power |
| Isolation (sensor to logic) | Not isolated |
| CPU Digital Input Specifications | |
| Built-in digital input | 14 inputs |
| Input type | PNP/NPN |
| Rated voltage | 24 V DC at 4mA |
| Max. continuous permissible voltage | 30 V DC |
| Surge voltage | 35 V DC for 0.5s |
| Logic " 1" voltage range | 15 to 30 V DC |
| Logic " 0" voltage range | 0 to 5 V DC |
| Input delay | Selectable (0.2 to12.8ms) |
| Connection of 2-wire proximity sensor (Bero) | 1mA |
| Premissible leakage current (Max. ) | |
| Isolation (field to logic) | Yes |
| Optical galvanic | 500 V AC for 1minute |
| Isolation groups | Refer to Wiring diagram |
| High Speed Counter (HSC) input rate | |
| HSC logic level 1(15 TO 30 VDC) | 20K Hz (Single phase), 10K Hz (Tow phase) |
| HSC logic level 1(15 TO 26 VDC) | 30K Hz (Single phase), 20K Hz (Tow phase), |
| Inputs on simultaneously | all |
| Cable length Max. | |
| Shielded | 500m normal inputs, 50m HSC inputs |
| unshielded | 300m normal inputs |
| CPU Digital Output Specifications | |
| Built-in outputs | 10 outputs |
| Output type | Solid State-MOSFET(Sourcing) |
| Rated voltage | 24 V DC |
| Voltage range | 20.4 to 28.8 V DC |
| Surge current (Max. ) | 8A for 100ms |
| Logic " 1" (Min) | 20 V DC, at maximum current |
| Logic " 0" (Max) | 0.1 V DC with 10KΩ load |
| Rated current per point(Max. ) | 0.75A |
| Rated current per common(Max) | 6A |
| Leakage current (Max) | 10µ A |
| Lamp load (Max) | 5W |
| Inductive clamp voltage | L+ minus 48 V DC, 1w dissipation |
| On State resistance (contact) | 0.3Ω Typical(0.6Ω max. ) |
| Isolation | |
| Optical (galvanic, field to logic) | 500 VAC for 1 minute |
| logic to contact | - |
| Resistance (logic to contact) | - |
| Isolation groups | Refer to wiring diagram |
| Delay(Max) | |
| Off to on | 2µ s(Q0.0, Q0.1), 15µ s(others) |
| On to off | 10µ s(Q0.0, Q0.1), 130µ s(others) |
| Switching | - |
| Pulse frequency (Max. ) | 20KHz(Q0.0andQ0.1) |
| Lifetime mechanical cycles | - |
| Lifetime contacts | - |
| Outputs on simultaneously | All at 60C(horizontal) |
| All at 50C(Vertical) | |
| Connecting two outputs in parallel | Yes, only outputs in same group |
| Cable Length (Shielded) | 500m |
| Cable Length (unshielded) | 150m |
| Order number | UN 214-1AD23-0XB0 |
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......