Cotrust PLC 224e 14di /10do Transistor Compatible Siemens 224 PLC

Products

Cotrust PLC 224e 14di /10do Transistor Compatible Siemens 224 PLC

Cotrust PLC 224e 14di /10do Transistor Compatible Siemens 224 PLC

China Cotrust PLC 224e 14di/10do Transistor Compatible Siemens 224 PLC, Find details about China Compatible Siemens, High Speed from Cotrust PLC 224e 14di/10do Transistor Compatible Siemens 224 PLC

Basic Info.

Model NO.

CTS7-214-1AD33-0X24

Customized

Customized

Net Weight

0.5kg

Trademark

COTRUST

Transport Package

CTN

Origin

China

HS Code

853710119

Model NO.

CTS7-214-1AD33-0X24

Customized

Customized

Net Weight

0.5kg

Trademark

COTRUST

Transport Package

CTN

Origin

China

HS Code

853710119

Product Desciption

Performnce Parameters :

Physical Features	Transistor
Size(W×H×D)	137×80×62mm
Power dissipation	7W
Power supply	DC:20.4 to 28.8V						AC:85V~265V
Rated power supply	24VDC						220VAC
Memory Features
Program memory	12KB, expandable to 16KB
Data memory	8KB
Super capacitor	About 112 hours(typical)
External battery (Optional)	About 200 days (typical)
General Features
Timers total 1ms 10ms 100ms		256 4 16 236
Counters total		256(back up by super capacitor)
Internal memory bits		256(back up by super capacitor)
Stored permanently on power down		112
Time Interrupts		2 with 1ms resolution
Edge Interrupts		4 rising edges and/ or 4 falling edges
Analog adjustment		2 with 8 resolution
Boolean execution speed		0.15µs
Float execution speed		8µs
Clock		embedded
Integrated Communication Function
Communication Interface			2 communication ports ,PORT0:PPI port,RS485;FPORT0:freeport,RS485 PWL
PPI baud rates			9.6, 19.2 and 187.5k
Freeport baud rates			1.2kbaud to 115.2k
Maximum cable length per segment Isolated repeater applied Isolated repeater unapplied			When it is 1000 m, baud rate is 187.5k; when it is 1200 m, 38.4k. 50 m
Maximum number of stations			32 stations per segment,126 stations per network
Maximum number of masters			32
Point to point (PPI Master Mode)			Yes(NWTR/NETW), 8 total, 2 reserved
I/O Features
Number of integrated digital inputs			14
Input type			Sink/Source
Number of integrated digital outputs			10
Output type			Solid-MOSFET		Relay dry contact
Digital I/O mapping domain			256(128 inputs/128 outputs )
Analog I/O mapping domain			64(32 inputs /32 outputs )
Maximum number of expandable I/O modules			7
Maximum number of digital I/O			230
Maximum number of analog I/O			56AI / 28AO
Pulse catch inputs			14
High-speed counters Total Uniphase counters Bi-phase counters			2(HSC0 and HSC1) 2×30KHz 2×20KHz
Digital Input Features
Number of integrated digital input				14
Input type				Sink/ Source (IEC Type 1/Source)
Rated voltage				24V DC
Maximum continuous permissible voltage				30V DC
Logical 1 Signal (minimum) Logical 0 Signal (Maximum )				18 VDC,2.5mA 5 VDC,1mA
Isolation(field side to logical circuit) Optical isolation(Galvanic) Isolation groups				Yes 500V AC,1 minute refer to the Terminal Identification
Simultaneous inputs				14
Maximum cable length Shielded Unshielded				500 M(standard input) 50 M(high-speed counters input) 300 M(standard input)
Digital Output Features
Number of integrated digital output			10
Output type			Solid--MOSFET			Relay dry contact
Rated voltage			24VDC			--
Maximum rated current of each point Surge current (Max)			0.75A 8A,100ms			2A 5A,contacts closed
Lamp load (Max)			5W			30WDC/200WAC
On- state resistance			0.3 ohm typical (Max :0.6 ohm )			0.2 ohm
Delay (Max) off to on on to off			2us(Q0.0, Q0.1),15us(others) 10us(Q0.0, Q0.1),130us(others)			30ms(Max)
High-speed Pulse Output			2 Axis ×50KHz Can run instructions of motion control CPU like PTP/ Speed_ctrl etc.; do not support PTO/PWM instructions in the programming software.			--
Switching frequency(Max)			--			1HZ
Mechanical life cycle			--			10 million times (Zero Load)
Contact endurance			--			0.1 million times (Rated Load)
Simultaneous output			10
Parallel output			Only when the outputs are in the same group
Maximum cable length Shielded Unshielded			500M(Standard Input) 150M(Standard Input)