Products

Face Recognition Automatic Turnstile Gate

China Face Recognition Automatic Turnstile Gate, Find details about China Access Controlled Barrier Gate, Flap Turnstile from Face Recognition Automatic Turnstile Gate

Model NO.
LD-Y602
Direction
Dual Direction
Infrared Sensor
5 Pairs
Open Speed
0.2s
Traffic Speed
35-40 Person/Min
Channel Width
550mm
Communication
RS232
Drive Motor
DC 24V
Trademark
LIDE
Transport Package
Carton
Specification
304 Stainless steel
Origin
China
HS Code
8608009000
Model NO.
LD-Y602
Direction
Dual Direction
Infrared Sensor
5 Pairs
Open Speed
0.2s
Traffic Speed
35-40 Person/Min
Channel Width
550mm
Communication
RS232
Drive Motor
DC 24V
Trademark
LIDE
Transport Package
Carton
Specification
304 Stainless steel
Origin
China
HS Code
8608009000
Flap barrier : It is mainly used for the entrance and exit management of the passage. It has the characteristics of fast opening, safety and convenience. It is an  idealmanagement and guidance equipment for high-frequency entrance and exit
passages for pedestrians. Widely used in airports, subway stations, stations, terminals, attractions, parks, shopping malls, office buildings, pedestrian walkways and other places.

Advantages
 
  1. Special stretch wing design, save closing time, improve the passage speed, prevent trailing , increase the security level.
  2. Especially suitable for ticketing channel, to avoid fare evasion behaviors
  3. Unified and standard external electrical interface, which can be connected with various reading and writing devices, which is convenient for system integration.


 
 







Face Recognition Automatic Turnstile Gate
Parameters:
 
Moduel No.LD-Y602
Size1400*300*1000mmm
Material304 stainless steel, tempered glass, acrylic
Wing door width:255mm; channel width: 550mm
Traffic speed35-40 persons/minute
Thickness of the cabinet1.2mm
Drive motor DC 24V brushless motor, low noise
Control panel one for one
Traffic directionone-way traffic/two-way traffic
Opening method ID/IC card and other readers to verify opening, infrared induction automatic opening, button opening, etc.
Opening signal dry contact signal
Protection function infrared/current anti-pinch, illegal intrusion infrared alarm
Life ≥9 million times
Infrared quantity5 pairs
Power40-60w
Applicable temperature: -20~75ºC

Function:
 
(1) Automatic return function: After the passage process is completed, the brake
wings automatically return to the initial blocking position.
 
(2) Power-off and opening function: When the power is off, the system will
automatically open the brake wings to open, which is convenient for evacuation
of the crowd and meets fire protection requirements.
 
(3) Anti-illegal intrusion function: When the card is invalid, there is no card
swiping, or the passage is forbidden, the forcible entry into the channel will be
regarded as illegal intrusion, and the system will automatically alarm and close
the flap.
 
(4) Anti-reverse intrusion function: Before the end of the passage process in a
certain direction, pedestrians entering the passage from the opposite direction
will be regarded as reverse intrusion, the system will automatically alarm and
close the wing.
 
(5) Anti-trailing function: The photoelectric switch detects the pedestrian traffic
situation, and detects the following phenomenon (the people behind are close to
the person in front, intending to pass without swiping the card), the system will
automatically alarm and close the brake wings.
 
(6) Intelligent linkage alarm: including illegal intrusion, reverse traffic and other
alarms, which can be linked with other alarm monitoring equipment and can be heard.
 
(7) Anti-pinching and anti-collision function:
A. Infrared anti-pinch: Install multiple pairs of photoelectric switches near the
area where the wing is active (anti-pinch area). Once a person or object is
detected in the anti-pinch area, the wing automatically stops; The flaps
continued to move.
 
 
Customized extended functions:
1.Counting and alarm functions;
2. The material of the flap (retractable arm) is acrylic or soft flap. The colors are
red, black and blue. The amount can be customized separately
3. Case material is mainly 304 stainless steel, other materials can also be
customized
4.Remote control switch
5. Dynamic face recognition
6. Can add emergency escape function, in the case of special emergency, start by
remote button
7. The communication interface is mainly RS232 / RS485, other interfaces
8.Box thickness standard 1.5mm can be customized 2.0mm
10. Fingerprint recognition of time attendance
11. QR code pass

Face Recognition Automatic Turnstile Gate
Face Recognition Automatic Turnstile Gate

















Face Recognition Automatic Turnstile Gate
Face Recognition Automatic Turnstile Gate
Face Recognition Automatic Turnstile Gate
Face Recognition Automatic Turnstile Gate
Face Recognition Automatic Turnstile Gate








After-sales services:
  1. All the products sold enjoy 18-month warranty and more spare parts are provided.
  2. After-sales service staff are online for 18 hours/day and all emails are replied within 1 hour. We offer life-time technology support on line, by emails, videos, phone calls, etc. We have engineers speaking English, Spanish and Arabic, etc. They are convenient to communicate with buyers or users directly.
  3. Engineers' on-site services are provided. Engineers are dispatched to customers' countries to handle various thorny problems.

FAQ: 
1. How about your company's actual strength?
We are the professional manufacturer in turnstiles in China. We have more than 100 employees, a R&D group with 5 people, 1 HQ office and 3 branches. Factories and office buildings are 2000 square meters in total.

2. How about the quality of your products?
We are in the highest level of quality with the most competitive price. For example, we use international standard  China-Japan Baoxin stainless steel 304 stainless steel, Taiwan Minwei electric supplier, belt import from German, 3M clue import from America etc. 

3. How about the lead time?
Normally we have stock for the hot sale models of standard products. Generally standard products need 7-10 working days.The customized products need 15-20 working days.

4. How long is your warranty period?
18 months. Life time spare parts.

5. How about your package?
Exported product: Wooden case package of Export exempted from inspection plus pearl wool and plastic wrap 
Domestic: Bubble wrap plus carton or pearl wool plus wooden packaging.
 

You Might Also Like