China Diesel Heating Auto Paint Booth Car Spray Booth Painting Room, Find details about China Paint Booth, Spray Booth from Diesel Heating Auto Paint Booth Car Spray Booth Painting Room
Outside Dimension (mm) | 7006*5356*3450(L*W*H) | Inside Dimension(mm) | 6900*4000*2650(L*W*H) |
Front Door(mm) | 3000*2600(W*H) | Service door (mm) | 1800*650(W*H) |
Total Power | 17KW | ||
Cabin system | Wall panel | 50mm EPS sandwich panel, steel sheet thickness: 0.6mm | |
Ceiling panel | Galvanized steel sheet. | ||
Basement | 300mm depth, middle with grids, side with checkered plates. | ||
Ramp | three pieces 2000*900mm ramps | ||
Glass | 4mm safety tempered glass | ||
Windows | Square glass windows. | ||
Air Make-up System | Air Inlet fan system | 1*7.5kw turbo fan, proof-explosion motor, Ex rated | |
Exhausted fan system | 1*7.5kw turbo fan, proof-explosion motor, Ex rated | ||
Air capacity | 25000m3/h | ||
Air Flowing speed | 0.3m/s in empty booth | ||
Air Control method | One manual damper for air inlet and exhausted system | ||
Air ducting | 8 meters air duct, one flop damper and one weather hood | ||
Purification System | Pre-filter | G3 grade, Pockets filter | |
Ceiling filter | EU5 / F5 | ||
Floor filter | green fiber glass filter / G3 grade | ||
Exhausted fan Filters | Pocket filter or M green fiber glass filter and active carbon | ||
Heating System | Heat Exchanger | SUS304 material, argon arc welding. | |
Heating burner: | RG5S diesel oil burner(gas burner for option) | ||
Heating productivity | 260000Kcal/h | ||
Spray to baking switch | Pneumatic Damper | ||
Chimney ducting | 3 meters stainless ducting and one chimney elbow | ||
Max heating temperature | 80degrees | ||
Heating time | 5-6min(20-60degrees) | ||
fuel consumption | 6-8L/vehicle | ||
Lighting System | Ceiling lights | 8 Units, each 4 * 36W Philips lamps, Total 1152 W | |
Side lights | 8 Units, each 4 *20W Philips lamps, Total 800 W | ||
Illumination | 1000LUX | ||
Controlling system | Switched control panel | Spraying & baking switch, lighting switch, emergency stop, breakdown alarm, failure alarm, pressure gauge |
Q: Which Port of loading?
A: Mainly ship from Ningbo port / Shanghai Port/Guangzhou Port.
Q: What is your MOQ?
A: All the products can be mixed in one container with low MOQ 1pcs.
Q: What is the Lead Time?
A: Normally it needs 20-25 days.
Q: What is the Payment Terms?
A: T/T/ 30% deposit before production and 70% before delivery.