Products

2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Protector Device for Solar System Protection

China 2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Protector Device for Solar System Protection, Find details about China 2p Surge Protector Device, SPD from 2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Protector Device for Solar System Protection

Current in(Ka)
20A Imax(Ka):40A
Poles Number
2p(DC+,DC-,Gnd)
Contact Position Indication
on/off/Trip
Trademark
BLUESUNSOLAR
Transport Package
a Small Carton
Origin
China
HS Code
8535291000
Current in(Ka)
20A Imax(Ka):40A
Poles Number
2p(DC+,DC-,Gnd)
Contact Position Indication
on/off/Trip
Trademark
BLUESUNSOLAR
Transport Package
a Small Carton
Origin
China
HS Code
8535291000

 2P 600V 40KA House Surge Protector Protective Low-voltage Arrester Device

This surge protector mainly used light volt power distribution system of lightning surge protection or other transient overvoltage. Products built for high voltage dc power supply overheating over-current protection function, can provide grade C for photovoltaic (pv) power system transient protection. Products using 35 mm DIN rail installation, module can change independently, easy to install and maintain, with remote communication alarm interface (dry contact), surge protector to facilitate remote monitoring.

 

Technical parameters

Nominal PV System Voltage500V1000V1200V
MCOV [UCPV]630Vdc1170Vdc1200Vdc
Max System Discharge Current (8/20 µs) [lmax]40kA40kA30kA
Voltage Protection Level [UP]≤2.5kV≤4.0kV≤4.5kV
Voltage Protection Level at 5kA [UP]≤2.0kV≤3.5kV≤4.0kV
Integrated Fuse Breaking Capacity/Interrupting Rating30kV/1000Vdc30kV/1000Vdc30kV/1200Vdc
TechnologyShort-Circuit Interruption (SCI) Overcurrent Protection
Operating Temperature Range [TU]−40ºC to +80ºC
Nominal Discharge Current (8/20 µs) [(DC+/DC−)­­> PE] [In]12.5kA
Response Time [tA]<25ns
Operating State/Fault IndicationGreen (good)/Red(replace)
Conductor Ratings and Cross­Sectional Area:Minimum60/70ºC 1.5mm²/14AWG Solid/Flexible
Maximum60/70ºC 35mm²/2AWG Stranded/25mm²/4AWG Flexible
Mounting35mm DIN Rail per EN 60715
Enclosure MaterialUL 94V0 Thermoplastic
Degree of ProtectionIP20
Capacity3 Modules, DIN 43880
Standards Information:IEC 61643­11 Type 2,IEC 61643­1 Class II
Product WarrantyFive Years**

 

Remote Contact Signaling

Remote Contact Signaling TypeChangeover Contact
AC Switching Capacity (Volts/Amps)250V/0.1A
DC Switching Capacity (Volts/Amps)250V/0.1A; 125V0.2A; 75V/0.5A
Conductor Ratings and Cross-Sectional Area for Remote Contact Signal Terminals60/75ºC Msx. 1.5mm²/14AWG Solid/Flexible
Ordering InformationOrder from Catalog Numbers Above


Dimensions and Main Drawings

2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Protector Device for Solar System Protection
2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Protector Device for Solar System Protection
2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Protector Device for Solar System Protection
2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Protector Device for Solar System Protection
2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Protector Device for Solar System Protection
2p DC 500V/600V Sup4-S40 SPD 20/40ka DC Surge Protector Device for Solar System Protection

our sevices:
Upon receipt of our products, if you are not satisfied with the quality or concerned, you can return it within 3 days after receiving our products , but only if products need to keep intact and original; any returns arising from the cost of freight and customs , will be borne by the buyer, buyer should be responsible to assume, otherwise, we have the rights to refuse to refund.

All in all, we believe our quality and service will satisfy your needs, we do not wish to see similar things happen, but onece them occurred, please contact us immediately, we will make every effort to resolve the problem and make you satisfied at the first time.

We will give you a best service.
1) Reply inquiry within 24 hours.
2) Answer your detailed question.
3) Freight forwarder: faster, safer,and convenient.
4) Please kindly inform us which item you are interested in so that the reasonable price could be provided soon.

company information:
LEADER ENERGY is a new energy enterprise,located in SHENZHEN, China,specializing in R&D,manufacturing and marketing PV connectors,PV junction boxes and PV assembles etc;
with an integrated utilization from solar modules,solar energy appliance to on off-grid solar power generation systems, and by the products R&D,mold design,production,sales through-train service.With advanced technology,our products have been authorized by TUV Rhineland,UL,CE successfully.
LEADER Company adheres to self R&D,strict detection standards and perfect detection system, modernization management approaches and excellent talent teams,hold the belief of 'survive for excellence,development for innovation',insist on being professional,large-scale brand.

You Might Also Like